This certificate of analysis summarizes the test results for batch CG22050280 of ROFF NON-SKID ADHESIVE GREY product. The batch was found to meet specifications for apparent bulk density of 1.71 g/ml and good spreadability and notchability when mixed with a ratio of 1:3.5 by weight. The quality control manager certified that the batch conforms to specifications. A note recommends that customers perform their own tests before full-scale production to ensure suitability for their purposes and conditions.
This certificate of analysis summarizes the test results for batch CG22050280 of ROFF NON-SKID ADHESIVE GREY product. The batch was found to meet specifications for apparent bulk density of 1.71 g/ml and good spreadability and notchability when mixed with a ratio of 1:3.5 by weight. The quality control manager certified that the batch conforms to specifications. A note recommends that customers perform their own tests before full-scale production to ensure suitability for their purposes and conditions.
This certificate of analysis summarizes the test results for batch CG22050280 of ROFF NON-SKID ADHESIVE GREY product. The batch was found to meet specifications for apparent bulk density of 1.71 g/ml and good spreadability and notchability when mixed with a ratio of 1:3.5 by weight. The quality control manager certified that the batch conforms to specifications. A note recommends that customers perform their own tests before full-scale production to ensure suitability for their purposes and conditions.
1 APPARENT BULK DENSITY(TAPPED) - with 50 taps, without sieving 1.71 g / ml 1.60 - 1.90 gm/ml 2 SPREADABILITY Of mix (W:P -1:3.5 by wt), complice - Should spread easily with good notchability. This is to certify that batch No. CG22050280 is confirming to the specification.
The above data represent the result of our quality assessment.
NOTE: We recommend that before using our products in full scale production, the customer should make his own tests to determine the suitability of the products for his own purpose under his operating conditions. As the circumstances under which our products are stored, handled and used are beyond our control, we cannot assume any responsibility for their misuse by the customer.
QC I/C : Rathod Hitesh
Note:- This document has been generated electronically and therefore has no hand written signature.
Pidilite Industries Limited
Regd. Office Corporate Office
Regent Chambers, 7th Floor Ramkrishna Mandir Road Jamnalal Bajaj Marg Andheri - E, Mumbai 400059, India 208 Nariman Point Mumbai 400021 T + 91 22 2835 7000 F + 91 22 2835 6007 www.pidilite.com