Professional Documents
Culture Documents
html)
(https://www.crime-scene-investigator.net/csi-training.html)
Home (https://www.crime-scene-investigator.net/index.html)
Crime Scene Response (https://www.crime-scene-investigator.net/csi-response.html)
Evidence Collection (https://www.crime-scene-investigator.net/csi-collection.html)
Crime Scene and Evidence Photography (https://www.crime-scene-
investigator.net/csi-photo.html)
Articles (https://www.crime-scene-investigator.net/csi-articles.html)
Bloodstain (https://www.crime-scene-investigator.net/csi-articles.html#5)
DNA (https://www.crime-scene-investigator.net/csi-articles.html#3)
Documentation (https://www.crime-scene-investigator.net/csi-articles.html#4)
Fingerprints (https://www.crime-scene-investigator.net/csi-articles.html#6)
Miscellaneous (https://www.crime-scene-investigator.net/csi-articles.html#1)
Photography (https://www.crime-scene-investigator.net/csi-articles.html#12)
Videos (https://www.crime-scene-investigator.net/csi-video.html)
College and University Programs (https://www.crime-scene-investigator.net/csi-
training.html)
Become a Crime Scene Investigator (https://www.crime-scene-
investigator.net/becomeone.html)
Employment (https://www.crime-scene-investigator.net/employment.html)
Resources/Links (https://www.crime-scene-investigator.net/csi-resources.html)
Search (https://www.crime-scene-investigator.net/search.html)
A number of factors must be taken into account including the position of cartridge cases ejected from
automatic and semi-automatic weapons. It is therefore essential that the exact position of spent casings
be marked and documented before any other investigative procedures are followed.
Photography is the first necessity so it is imperative that the crime scene be afforded absolute security.
Until spent cartridges are properly recorded-all foot traffic must be banned from the area.
Each spent casing should be marked using standard crime scene evidence identifiers such as "evidence
tents," placards, or similar devices.
Typically, overall scene photos are taken first, followed by medium distance and close-ups. Be certain to
include other nearby objects in these photos to better establish the true position of each object
photographed.
It is also imperative that a crime scene sketch be prepared once photography is completed. Each spent
casing should be located on the sketch that includes either triangulation or coordinate methods of
measurement.
The physical location of spent casings may tell a unique story of their own. Placement of these objects
results from normal ejection by the weapon and may provide limited data as to the location of the
shooter, the direction of shots fired and possibly the path taken by the bullet(s). Ejected casings may also
substantiate or refute statements from witnesses, victims or suspects.
Historically, the technique of "stringing" a crime scene may date back over 70 years. Stringing has been,
and continues to be used at crime scenes for the purpose of determining the source of blood spatter and
the path of bullets.
While stringing the crime scene has been the most frequently used method for documenting bullet
travel, it does have its short-comings. When a bullet passed through a window, sharp edges are created,
therefore if string is used it must be protected (tape or drinking straw). If more than just a few feet of
travel is involved, string is susceptible to droop or sagging. It is therefore advisable to use a strong nylon
or other synthetic string rather than cotton string.
Alternatives to Using String
An ideal alternative to use are rods of different diameters. With the exception of hollow aluminum rods,
most metals like steel, copper or brass may tend to be too heavy. Also consider wooden dowels or plastic
and fiberglass rods.
Due to the variety and complexity of crime scenes, it is impractical to publish specific guidelines. The
following guidelines are offered as a starting or reference point. The actual methods and procedures
followed will be dependent upon the experience, judgment and training of the crime scene investigator.
Earn a Degree in Crime Scene Investigation, Forensic Science, Computer Forensics or Forensic
Psychology (https://www.crime-scene-investigator.net/csi-training.html)
The procedures followed when investigating shootings that occurred in a structure or motor vehicle are
quite similar. Again, these suggestions are meant to be a starting point and the investigator should-first
and foremost-follow departmental guidelines and procedures.
Shot or shots fired through a glass window: By examining the bullet hole, determine if the bullet was
fired from outside or inside the window.
Using a sterile swab, collect any possible gunpowder residue from around the bullet hole from the
outside. Repeat this procedure, using a fresh swab, on the inside of the window.
Locate any bullet holes inside the structure or vehicle.
Photograph all bullet holes found in the structure and vehicle. Be certain to include a scale and visible
marker (stick on label) adjacent to each bullet hole:
Overall, wide angle photos
Medium distance photos
Close-up photos showing scale to determine bullet hole size
Determine if the bullet is lodged in the wall or object it struck. Locate the exit hole, if any.
If string is used, run the string from the bullet hole in the glass to the interior hole. Anchor the string
outside of the window by tying it to a pencil, pen, etc., for support. Protect the string with tape or a
drinking straw where it passes through the glass. Fasten the other end of the string to the wall or object
adjacent to the bullet hole using tape. Photograph the string from a distance, attempting to get the
entire run of the string.
If rods are used (preferred method) insert the rod into the entrance hole and through to the exit hole.
Photograph the rod in place. Use the inclinometer to determine the angle of the rod to the wall and
photograph it.
Prepare sketches as needed with all measurements required to give a full understanding of the
reconstruction.
Note: If cartridge cases are found inside the structure, this will indicate that shooting also occurred
inside. A thorough search of the room(s) involved is needed to locate additional bullet holes. Repeat the
steps above as they apply to the indoor situation.
At no time during this preliminary evidence collection procedure should any attempt be made to recover
the spent bullets that may be lodged in walls, ceilings, doors or furniture. Not until all of the above
procedures are completed and photos and sketches finished should spent bullets be recovered.
Obviously extreme care must be taken to recover spent bullets. The area where the bullet is lodged (wall,
door, furniture, etc.) must be cut out using hand tools. Despite the methods often shown on TV, this is
not the time to dig out the bullet using a pocket knife. What is needed is a hand drill to make lead holes
and then a keyhole saw to cut around the bullet hole. A sharp knife will be needed to cut into cloth
furniture.
Laser Usage
A small laser or laser pointer is also very useful at certain crime
scenes for determining bullet trajectory. The laser has, in many
instances, replaced the use of string. Some crime scene kits contain a
laser that has been modified so that it can be directly attached to the
rod protruding from a bullet hole or attaching it to an inclinometer.
One drawback of the laser is that the light beam is often invisible in
well-lighted interiors.
Conclusion
Stringing the crime scene during reconstructing is a relatively simple, inexpensive, and accurate method
of demonstrating bullet trajectory. It must be emphasized, however, that this determination is not
precise, but it is more of a general, or relative, position-fixing method. The use of string is still valid and
remains as only one of several methods of determining the point of origin of a gunshot. When feasible
for use in court, it remains an excellent demonstrative tool.
Don Penven has more than 35 years direct and indirect experience in law
enforcement. He currently serves as a technical support representative and
technical writer for Sirchie Finger Print Labs.