Professional Documents
Culture Documents
Power Tools
#RyobiToolsUK
Contents ryobitools.co.uk
20
years of
exactly what people need from their Power tools.
ONE+ Innovation
Cordless Tools
18V ONE+ Power Tools .............................................................................................................8 – 23
Corded Tools
AN INDUSTRY BREAKTHROUGH MARKET LEADERS IN INNOVATION A FIRST FOR THE DIY MARKET
Drilling ........................................................................................................................................38 – 40
Grinding ......................................................................................................................................41 – 42
Woodworking..............................................................................................................................43 – 50
1996 2000 2004 2012 2013 2015 2016
03
3
#RyobiToolsUK
ONE+ Power Tools Battery Technology ryobitools.co.uk
Over 40 Tools
powered by the same
ONE+ battery
Introducing the DIY market’s first 5.0Ah battery.
528
Drive 1,000
290
more screws.*
1.5Ah 5.0Ah
Do it your way
*On a single charge when compared to the 1.5Ah battery.
Power over 40 different power and garden tools with the same Lithium battery.
Lithium instantly upgrades your ONE tool.
02
4 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 5
03
#RyobiToolsUK
New for 2016 New for 2016 ryobitools.co.uk
Introducing our
best 18V
drill ever.
40% more run-time
Electronic Torque control allows you to limit the power of the drill to avoid
driving screws too far into the work piece or stripping screw heads. This
Innovative motor technology. innovative control system has 10 settings in each gear, and a neat memory
feature to help you find your last used setting.
Ryobi’s Brushless Technology uses patented electronics
to control a compact but powerful motor.
These advanced electronics constantly monitor and fine tune the performance of the motor
to the application, providing higher sustained torque levels to drill faster and optimised power Powered by batteries.
usage for increased run-time. Precise computerised control of the motor delivers huge run-time
Created with our best ever technology that gives you
and performance benefits.
more power and longer run-time than ever before.
276
397
* Drilling 16mm holes into 50mm of wood with 5.0Ah battery pack.
Run-time may vary on tool, battery and application.
Please see our ONE+ System range of tools on page 8 – 9 for product details.
02
6 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 7
03
#RyobiToolsUK
ONE+ Power Tools ONE+ Power Tools ryobitools.co.uk
• Brushless motor is electronically-controlled to optimise efficiency for up to 40% • Combination Drill, Screw Driver and Percussion drill to suit Voltage (V) 18
more run time per charge. multiple applications No. of batteries supplied 0
• Electronic performance control delivers up to 20% more power than brushed • All Metal 13mm keyless chuck for greater accessory Charger supplied −
Max. torque (Nm) 55
drills compatibility
Chuck capacity (mm) 13
• Brushless motor runs cooler and last up to 10 times longer than brushed drills • LED Illuminates the work area No load speed gear 1 (rpm) 0-375
• All metal 13mm ratcheting chuck for improved bit gripping strength and durability • Quick adjustment 24 torque settings for perfect screwdriving No load speed gear 2 (rpm) 0-1600
• e-Torque control settings make it easy to drive screws flush everytime every time Max. drilling wood (mm) 38
• LED illuminates the work area • 2 gears to control max speed to match different materials and Max. drilling steel (mm) 13
• Metal planetary gearbox with 2 gears (0-440 & 0-1,700 RPM) for a wide range of applications Max. drilling masonry (mm) 13
drilling and fastening applications • Magnetic bit holder keeps screws and accessories close to Torque settings 24
• New ErgoTech Handle design with Gripzone+ microtexture for added comfort hand Weight with battery pack (kg) 2.1
Recyclable
and control • Ergonomic GripZone+ with microtexture for a postive grip Supplied in
carton
• The most compact Ryobi 18V percussion drill ever, measuring 201 mm in length Article Number 5133002478
• Powered by Lithium+ battery technology which provides more power, longer EAN Code 4892210137647
runtime and better durability than our previous lithium batteries
Standard equipment (R18PD-0)
Double ended bit, Auxiliary
Also Available as handle and Depth stop
LLCDI18022 R18DDP-0
18V Cordless Percussion Drill (2x1.3Ah) 18V Cordless Drill/Driver
Voltage (V) 18
No. of batteries supplied 2
• Combination Drill, Screw Driver and Percussion drill to suit Charger supplied 45 min • 13mm keyless chuck for greater accessory compatibility Voltage (V) 18
multiple applications Max. torque (Nm) 50 • Electronic variable speed, reverse and brake for total control No. of batteries supplied 0
• 13mm keyless chuck for greater accessory compatibility Chuck capacity (mm) 13 • Spirit level for precise drilling Charger supplied −
Max. torque (Nm) 45
• Quick adjustment 24 torque settings for perfect screwdriving No load speed gear 1 (rpm) 400 • 2 gears to control max speed to match different materials and
No load speed gear 2 (rpm) 1550 Chuck capacity (mm) 13
every time applications No load speed gear 1 (rpm) 440
percussion rate gear 1 6000
• 2 gears for most materials and applications • Quick adjustment 24 torque settings for perfect screwdriving every No load speed gear 2 (rpm) 1,600
percussion rate gear 2 23250
• Electronic variable speed, reverse and brake for total control Max. drilling wood (mm) 38
time Max. drilling wood (mm) 32
Max. drilling steel (mm) 13 • Magnetic bit holder keeps screws and accessories close to hand Max. drilling steel (mm) 13
Max. drilling masonry (mm) 13 • Soft touch trigger and gear switch for user comfort Torque settings 24
Torque settings 24 • Ergonomic GripZone™ overmould technology for improved comfort Weight with battery pack (kg) 1.81
Weight with battery pack (kg) 1.93 with a positive grip Recyclable
Supplied in
Supplied in Tool bag carton
Also Available as Article Number 5133002095
Article Number 5133001955
EAN Code 4892210124609 EAN Code 4892210128034
18V Cordless Percussion Drill (1x1.3Ah) 18V Cordless Percussion Drill (2x1.3Ah)
Name: Product Code: EAN Code: Name: Product Code: EAN Code:
LLCDI18021L 5133001947 4892210124562 LLCDI18022L 5133001949 4892210124579 Standard equipment (LLCDI18022) Standard equipment (R18DDP-0)
1x double-ended screwdriver 1 x double-ended
18V Cordless Hammer Drill & Impact Driver Kit screwdriver bit
18V Cordless Percussion Drill (2x4.0Ah) bit
(2x1.3Ah)
Name: Product Code: EAN Code: Name: Product Code: EAN Code:
LLCDI18LL40S 5133002236 4892210129093 R18CK2A-LL13F 5133002241 4892210126733
02
8 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 9
03
#RyobiToolsUK
ONE+ Power Tools ONE+ Power Tools ryobitools.co.uk
R18SDS-0 RAD1801M
18V Cordless SDS+ Rotary Hammer Drill 18V Cordless Right Angle Drill
• Pneumatic hammer mechanism delivers 1.3J of EPTA rated Voltage (V) 18 • Cordless Angle Drill ideal for working in tight and awkward corners Voltage (V) 18
impact energy ideal for drilling holes in stone and concrete No. of batteries supplied 0 • Keyless 10mm chuck, for simple bit changes No. of batteries supplied 0
• SDS+ chuck for fast drilling and easy accessory bit changes Charger supplied − • Automatic spindle lock for one-handed bit change Charger supplied −
Impact rate (ipm) 0-5,000 Chuck capacity (mm) 10
• 4 modes for extra versatility (hammer drill, rotary drill, chisel, • LED lights up your work area for better visibility
Blow energy (J) 1.3 No load speed gear 1 (rpm) 0-1100
chisel alignment) Max. drilling wood (mm) 16
• Magnetic drill bit tray for easy storage and access to your drill bits Max. drilling wood (mm) 38
• Chisel function ideal for applications such as light tile removal Max. drilling steel (mm) 13 • Variable speed, reverse and brake for total control of your tool Max. drilling steel (mm) 10
• Non-hammer setting ideal for drilling holes in wood, metal and Max. drilling masonry (mm) 16 Weight with battery pack (kg) 1.83
tiles Weight with battery pack (kg) 2.08 Recyclable
Supplied in
• Variable speed, forward and reverse for total control Supplied in
Recyclable carton
• Built-in LED lights up your work area carton Article Number 5133001167
• Gripzone+™ overmold for added comfort and control reduces Article Number 5133002305 EAN Code 4892210118585
EAN Code 4892210130211
fatigue during use
Standard equipment (RAD1801M)
1 x double-ended screwdriver bit
Also available as
18V SDS+ Rotary (Pneumatic) Hammer Drill
(1x4.0Ah)
Name: Product Code: EAN Code:
R18SDS-LL40S 5133002432 4892210135612
RID1801M R18AG-0
18V Cordless Impact Driver 18V Cordless Angle Grinder
• High power cordless impact driver perfect for screwing and Voltage (V) 18 • Cordless grinder with 115mm disk ideal for a variety of cutting Voltage (V) 18
loosening larger bolts No. of batteries supplied 0 and grinding applications No. of batteries supplied 0
• Motor deliveres 220Nm of torque to easily drive long screws and Charger supplied − • 3 position handle for better control when grinding or cutting Charger supplied −
Max. torque (Nm) 220 Bore size (mm) 22
nuts • Two stage non lockable switch for enhanced user protection
No load speed (rpm) 3200 No load speed (rpm) 7500
• Keyless bit changes 6.35mm (1/4 ‘’) hex drive Weight with battery pack (kg) 1.63
preventing accidental start up Wheel size (mm) 115
• 3 LED lights light up your work area, so you can see what you are Recyclable • Easy to adjust tool-less wheel guard Weight with battery pack (kg) 2.58
doing Supplied in
carton • Spindle lock for easy accessory changing Recyclable
Supplied in
• Robust die-cast front gear housing to protect the motor Article Number 5133001169 • GripZone™ overmould technology for improved comfort carton
• Variable speed, reverse and brake for total control of your tool EAN Code 4892210118608 with a positive grip Article Number 5133001903
EAN Code 4892210123657
NEW R18IW3-0 Discover how to make creative DIY projects for your home and garden.
18V Cordless 3-Speed Impact Wrench
• 18V high power motor delivers 400Nm of torque ideal for fast tightening/ Voltage (V) 18
•
removing of heavy duty fasteners.
Impact Mechanism allows for high amounts of torque with little reactionary
No. of batteries supplied
Charger supplied −
0
PLYWOOD END GRAIN RECLAIMED WALL MOUNTED
feedback through the handle. Impact rate (ipm)
Max. torque (Nm)
0-3200
400
COFFEE TABLE TIMBER PLANTER BIKE STORAGE
• Tri-Beam LED lights eliminate shadows on bits and fasteners even in the
darkest work areas. No load speed (rpm) 0-2900
Weight with battery pack (kg) 2.00
• 3 speed settings provide added control and versatility.
Recyclable
• Mode 1: 0-2,100 rpm for precision work Supplied in
carton
• Mode 2: 0-2,500 rpm for added control which helps prevent damage to
Article Number 5133002436
fasteners and materials EAN Code 4892210132352
• Mode 3: 0-2,900 rpm for maximum performance for the toughest applications
• 1/2” Square drive with locking pin for easy socket fitment Follow step-by-step guides so you can DIY at home
•
•
Inlcudes 1/4” hex adapter to fit screw driver bits
Fit up to 100 wheels per charge when combined with our high capacity
Standard equipment (R18IW3-0)
⁄4˝ hex adapter
1 FRAMING YOUR and impress your family and friends. We’d love to
Lithium+ 4.0Ah battery RB18L40 FAVOURITE PIC see your creations! Tag your project photos with
#MyRyobi and we will share the best ones.
Also Available as
18V Cordless Impact Wrench (1x 1.3Ah)
Name: Product Code: EAN Code:
R18IW3-L13GKIT 5133002530 4960673134906 Visit uk.ryobitools.eu/my-ryobi for more information and follow us on Facebook, Twitter & Instagram @RyobiToolsUK
02
10 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 11
03
#RyobiToolsUK
ONE+ Power Tools ONE+ Power Tools ryobitools.co.uk
• A versaltile multi purpose tool that cuts drywall, metal, wood, plastic, • Ideal for making long straight cuts, trimming sheet wood to size,
composite and many other materials; it also sands the finest details. cutting kitchen work tops, flooring or to make quick and accurate
• 4 position articulating head for increased application versatility and cross cuts in timber.
comfort • Impressive cut capacities 52mm at 90°, 36mm at 45° allows you to
• Tool less blade change complete applications usually reserved for corded tools
• 6 Position variable speed wheel for ultimate control across a range of • Tool less depth and bevel adjustments make it quick at easy to set
applications. up the saw
• Built-in LED light ensures your work piece is always well lit and clearly • Rotatable dust port helps keep the cut line clear and allows you to
visible. work in a dust free environment by connecting to a vacuum
• Universal accessory adaptor makes the product compatible with any • Premium Thin Kerf 165mm blade with 24 carbide tipped teeth
brand of accessories provides superb performance and cut quality
• Gripzone+™ overmold for added comfort and control reduces • Make up to 275 cross cuts in 2x4 (52x100mm) timber per charge
fatigue during use. when combined with our high capacity Lithium+ 5.0Ah battery
RB18L50
• Cuts through 2x4” Wood
Also available as
R18JS-0 RWSL1801M
18V Cordless Jigsaw 18V Cordless Circular Saw
• Cordless jigsaw with 25mm stroke length ideal for cutting wood at a Voltage (V) 18 • Ideal for making long straight cuts, trimming sheet wood to size, Voltage (V) 18
veriety of different angles No. of batteries supplied 0 cutting kitchen work tops, flooring or to make quick and accurate No. of batteries supplied 0
• 1 handed speed control for easy speed adjustment to suit different Charger supplied − cross cuts in timber. Charger supplied −
Stroke length (mm) 25 Blade diameter (mm) 150
applications • Impressive cut capacities 45mm at 90°, 32mm at 45°
No load stroke rate (spm) 1,100 - 3,000 Bore size (mm) 10
• 4 stage pendulum action for enhanced cutting performance Max. cutting capacity
• Tool less depth and bevel adjustments make it quick at easy to set No load speed (rpm) 0-4,700
• Tool-less blade clamp for quick and easy blade change 101 up the saw
wood (mm) Max. cutting depth 45° (mm) 32
• Lock on switch keeps your tool working so reduces your fatigue Weight with battery pack • Dust port helps you to work in a dust free environment by
2.53 Max. cutting depth 90° (mm) 45
(kg)
• LED worklight illuminates the cut line and work area Supplied in Recyclable carton
connecting to a vacuum Bevel capacity (°) 50
• Easy base adjustment to cut between 0° to 45° angles Article Number 5133002158 • Premium Thin Kerf 150mm blade with 18 carbide tipped teeth Weight with battery pack (kg) 2.93
EAN Code 4892210128010 provides superb performance and cut quality Supplied in
Recyclable
carton
Article Number 5133001165
Standard equipment (R18JS-0) EAN Code 4892210118561
1 x 10 TPI Wood blade, 1 x 14 TPI
Scrolling blade
Standard equipment (RWSL1801M)
Also available as Hex key, 150mm TCT circular saw
blade and edge guide
18V Cordless Circular Saw (1x1.3Ah)
Name: Product Code: EAN Code:
RWSL18011L 5133001956 4892210124616
02
12 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 13
03
#RyobiToolsUK
ONE+ Power Tools ONE+ Power Tools ryobitools.co.uk
• Ideal for cutting a wide variety of materials including worktops, Voltage (V) 18 • Ideal for light to medium weight applications such as fine finshing and Voltage (V) 18
boards, metal or plastic pipes, branches and other tough No. of batteries supplied 0 paint removal No. of batteries supplied 0
materials. Charger supplied − • 1.8mm orbital sanding motion for fast and efficient stock removal Orbit rate [opm] 22,000
Stroke length (mm) 22 Diameter of orbit (mm) 1.8
• Tool-less blade clamp for quick and easy blade changes • Compact design allows users to sand easily in corners and tight
No load speed (rpm) 3100 Sanding pad size (mm) 100x140mm
• The variable speed trigger with electric brake provides more spaces Weight with battery pack (kg) 1.06
Max. cutting capacity wood
speed control to cut a variety of materials. Make cuts faster with (mm)
180 • Quick fit hook and loop sanding sheet attachment Recyclable
• Triangular pad design for sanding up to the edge in tight corners Supplied in
up to 3,100 strokes per minute Weight with battery pack carton
2.33
• 22mm stroke length provides impressive cutting performance (kg) Article Number 5133002443
• The combination of the unique Anti-Vibe™ handle and the new Supplied in Recyclable carton EAN Code 4892210133700
GripZone™ overmold increase user comfort and control while Article Number 5133001163
reducing fatigue during prolonged use EAN Code 4892210118707
Standard equipment (R18PS-0)
• The adjustable, pivoting shoe allows greater depth control and 6 sanding sheets (2x60, 2x120 and
more efficient use of the blade by moving to a less worn section. Standard equipment (RRS1801M) 2x240 Grit)
1 x metal blade, 1 x wood blade
• Cordless Mitre saw cuts up to 38x108mm at 90º Voltage (V) 18 • Ideal for light to medium weight applications such as fine finishing Voltage (V) 18
• Exactline laser accurately aligns the cut line with the blade No. of batteries supplied 0 and paint removal. No. of batteries supplied 0
• Pre-select mitre angles at 0,15,22.5,31.6 and 45º and bevel from Charger supplied − • 2.5mm orbital sanding motion for fast and efficient stock removal. Orbit rate [opm] 20,000
Blade diameter (mm) 190 Diameter of orbit (mm) 2.5
0-45º • Random Orbital action delivers a swirl free finish.
Battery type − Sanding pad size (mm) 125
• Thin Kerf 24T carbide tipped blade for improved performance and Mitre capacity left (°) 45
• Built in dust extraction system ensures a clean work environment. Weight with battery pack (kg) 1.56
longer runtime Mitre capacity right (°) 45 • Quick fit hook and loop sanding sheet attachment Recyclable
• Extremely compact and lightweight for great portability • Up to 50 minutes runtime with the 5.0Ah Lithium+ battery RB18L50 Supplied in
Bevel capacity left (°) 45 Carton
• Make up to 189 cross cuts (22x100mm) combined with the Weight with battery pack (kg) 7.43 Article Number 5133002471
Lithium+ 5.0Ah battery RB18L50 Supplied in
Recyclable EAN Code 4892210136855
carton
Article Number 5133000932
EAN Code 4892210116895
Standard equipment (R18ROS-0)
3 sanding sheets (80, 120 and 240 grit)
CCG1801MHG CPL180MHG
18V Cordless Caulking Gun 18V Cordless Planer
• Produces high force for high viscosity materials Voltage (V) 18 • Chamfering groove in die-cast front shoe for added precision Voltage (V) 18
• Switch lock helps prevent accidental start-ups No. of batteries supplied 0 • Positive depth adjustment 0-0.4mm No. of batteries supplied 0
• Variable speed adjustment lever for flow control Charger supplied − • Additional front handle for greater control Charger supplied −
No load speed high 6 Planing width (mm) 50
• Easy release manual push rod for quick reloading • Side fence included for precision planing
No load speed low 1 Planing depth (mm) 0.4
• Durable gears and carriage frame help ensure tool longevity Max. ouput force 225
• DustTech™ Integrated technology for maximum dust pick-up Rebate depth (mm) 13
• On-board puncture tool to brake tube seal if needed Weight with battery pack (kg) 2.13 • GripZone™ overmould technology for improved comfort with a No load speed (rpm) 10,000
• GripZone™ overmould technology for improved comfort with a Article Number 5133000192 positive grip Weight with battery pack (kg) 2.13
positive grip EAN Code 4892210109200 Article Number 5133000195
EAN Code 4892210109149
02
14 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 15
03
#RyobiToolsUK
ONE+ Nailers ONE+ Power Tools ryobitools.co.uk
R18N18G-0
R18N16G-0
18V Cordless 16G Nailer
ONE+ System
As part of the ONE+ System,
you can use the same Lithium+
battery to power a range of
P620
18V Cordless Speed Sprayer
different power and garden tools.
• Ideal for painting fences, exterior walls, garage doors and Voltage (V) 18
outbuildings No. of batteries supplied 0
• Choose between three spray patterns, horizontal, vertical or round, to Charger supplied −
Your guide to choosing the right nails provide you with the best coverage whilst minimising overspray Container capacity (ml)
Paint coverage sprayer (m²/
1000
Ideal for fixing wood without the need for The Finish nailer is ideal for fixing skirting, coving
screws, pre-drilling or glue. Also great for and larger materials using a slightly larger nail size
furniture making
02
16 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 17
03
#RyobiToolsUK
ONE+ Automotive ONE+ Automotive ryobitools.co.uk
Need to change
a tyre?
Never get left in the dark. The ONE+ Impact Wrench
makes light work of loosening
Whether you need to see under the
and tightening nuts on your
bonnet of your car or you have broken
wheels. So, you can change
down in the dark, the ONE+ Lights
your wheel quickly with ease
have you covered.
whenever you want, wherever
you want.
02
18 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 19
03
#RyobiToolsUK
ONE+ Power Tools ONE+ Power Tools ryobitools.co.uk
• 18V high power motor delivers 400Nm of torque ideal for fast tightening/ Voltage (V) 18
removing of heavy duty fasteners. No. of batteries supplied 0
• Impact Mechanism allows for high amounts of torque with little reactionary Charger supplied −
feedback through the handle. Impact rate (ipm) 0-3200
• Tri-Beam LED lights eliminate shadows on bits and fasteners even in the Max. torque (Nm) 400
darkest work areas. No load speed (rpm) 0-2900
Weight with battery pack (kg) 2.00
• 3 speed settings provide added control and versatility.
Recyclable
• Mode 1: 0-2,100 rpm for precision work Supplied in
carton
• Mode 2: 0-2,500 rpm for added control which helps prevent damage to
Article Number 5133002436
fasteners and materials EAN Code 4892210132352
• Mode 3: 0-2,900 rpm for maximum performance for the toughest applications
• 1/2” Square drive with locking pin for easy socket fitment
• Inlcudes 1/4” hex adapter to fit screw driver bits Standard equipment (R18IW3-0)
• Fit up to 100 wheels per charge when combined with our high capacity ⁄4˝ hex adapter
1
Also Available as
18V Cordless Impact Wrench (1x 1.3Ah)
Name: Product Code: EAN Code:
R18IW3-L13GKIT 5133002530 4960673134906
R18I-0
18V Cordless Inflator
Voltage (V) 18
No. of batteries supplied 0 CHV182M
Charger supplied −
Diameter of orbit (mm) 12.5 18V Cordless Hand Vac
Oscillation rate (opm) 2500
Size (mm) 254
Weight without battery pack
• Motor creates strong vacuum suction to easily pick up a variety of dry Voltage (V) 18
1.97 materials No. of batteries supplied 0
(kg)
• Dual filter system captures debris for removal to provide maximum Charger supplied −
Article Number 5133002465
Container capacity (ml) 173
EAN Code 4892210135483 vacuum performance
Weight with battery pack (kg) 1.39
• Easy-clean dust bowl for quick disposal with no mess
Recyclable
Standard equipment (R18B-0) • Crevice tool with built-in slide brush for hard to reach areas Supplied in
carton
1x Elastic polishing bonnet, • GripZone™ overmould technology for improved comfort with Article Number 5133000077
1x Elastic buffing bonnet a positive grip EAN Code 4892210106339
02
20 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 21
03
#RyobiToolsUK
ONE+ Power Tools ONE+ Power Tools ryobitools.co.uk
• Premium speaker provides clear, crisp music at a range of volumes • Rotating head directs light where needed Voltage (V) 18
• Integrated Bluetooth® Wireless Technology for ultimate versatility to • Multi-functional design that is capable of sitting flat on the No. of batteries supplied 0
stream full audio from up to than 10 metres away battery or hanging from a nail, screw or hook Charger supplied −
Bulb type Halogen
• Digital tuning with capability to save 10 FM and 10 AM station presets • Lightweight and durable for every day use
Weight with battery pack (kg) 0.72
• 1 Amp USB Charger port charges many portable electronic devices • High power Halogen bulb emits up to 150 Lumens with a Article Number 5133001637
including smartphones recommended throw of up to 10 metres EAN Code 4892210120199
• Integrated auxiliary input with storage location for smartphone use
• Compact size is durable and portable for use at home
• Low battery indicator advises when 18V ONE+™ battery will need to
be recharged
• Provides over 15 Hours runtime using the RB18L40 Lithium+ battery
R18ALF-0
Voltage (V) 18 18V Cordless Folding Area Light
No. of batteries supplied 0
Charger supplied −
Speaker diameter (mm) 90mm • 20 high power LEDs emit up to 850 Lumens Voltage (V) 18
Speaker output (W) 3 • Stand, fold or hang almost anywhere, allowing you to work with both No. of batteries supplied 0
Weight with battery pack (kg) 1.1 hands in a clearly lit environment Charger supplied −
Article Number 5133002455 Bulb type LED
• 2 separate banks of LED’s so you can choose to have either half of
EAN Code 4892210135476 Weight with battery pack (kg) 1.3
the light on or all 20 LEDs for full power Article Number 5133002304
• CCT (Correlated Colour Temperature) of 5,700K means the light emits EAN Code 4892210120199
Standard equipment (R18R-0) a bright white beam of light, helping to see objects better and easier.
(2) AAA Alkaline Batteries • CRI rating of 80, meaning its 80% as good as natural daylight which
is ideal for all your various DIY and decorating projects.
• Extensive runtime up to 360 minutes with RB18L40
• Cordless fan ideal for indoor our outdoor use, compact and portable Voltage (V) 18V • Works with all ONE+ batteries for cordless convenience Voltage (V) 18
with built in carry handle No. of batteries supplied 0 • 25W lifetime LED emits up to 2,000 Lumens. No. of batteries supplied 0
• 8 adjustable positions to aim air in multiple directions Charger supplied − • 360° rotation of the lens and multiple hanging options add versatility. Charger supplied −
Fan speed [rpm] 2,100 / 1,400 Bulb type LED
• Multiple hanging options for maximum versatility. • Compact design with integrated handle for easy transportation and
Weight with battery pack (kg) 1.56 Weight with battery pack (kg) 1.9
• 2,100 rpm for max air flow or 1,400rpm for increased runtime and Article Number 5133002612
storage Article Number 5133002339
quieter operation EAN Code 4892210140678 • Up to 240 minutes run time as a cordless light with RB18L40 EAN Code 4892210117311
• Up to 18 Hours runtime with RB18L50 allowing you to run all day or
even overnight on one charge.
02
22 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 23
03
#RyobiToolsUK
ONE+ Garden Tools ONE+ Garden Tools ryobitools.co.uk
QUIKMOW+
And did you know we have NEW
18V Cordless Lawn Mower, 33cm Deck (1x4.0Ah)
NEW OLM1833H
18V Cordless Lawn Mower, 33cm Deck
Outdoor tools and kits for all your gardening needs • Mow right to the perimeter of your garden with EasyEdge grass
comb feature
Article Number
EAN Code
5133002616
4892210139351
• Ergonomic handle design, with 5 height positions to
accommodate all users Standard equipment (OLM1833H)
• Folding and removable handles with a collapsible grass catcher Mulching Plug, 35L grass bag
Buy any tool + battery kit, then expand your family Or Select the tool, battery & charger you want from the
compatible with all home & garden tools in the cordless system
02
24 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 25
03
#RyobiToolsUK
ONE+ Garden Tools ONE+ Garden Tools ryobitools.co.uk
RLM18X40H240
•
36V Cordless Fusion Mower [Powered by 2x ONE+ Batteries]
RLM18C34H25
36V Fusion Hybrid Cordless Lawn Mower, 34cm Deck, Powered by ONE+ (2x 2.5Ah)
Voltage (V) 18
Battery pack capacity (Ah) 2.5Ah
No. of batteries supplied 2
Charger supplied 6 hr
Decksize (cm) 34
Drive mechanism Push
Mulching capable Yes
Weight with battery pack (kg) 16.1
Article Number 5133002367
EAN Code 4892210132291
02
26 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 27
03
#RyobiToolsUK
ONE+ Garden Tools ONE+ Garden Tools ryobitools.co.uk
RLT1830H13 OHT1855R
18V Hybrid Grass Trimmer, 30cm Cutting Width 18V Cordless Hedge Trimmer 55cm Blade
• Innovative 18V Hybrid power, offers the choice of seamlessly Voltage (V) 18 • 18V Cordless Hedge Trimmer for pruning hedges & shrubs Voltage (V) 18
changing between corded and cordless power in the same tool Battery pack capacity (Ah) 1.3 • Powerful cutting performance due to high torque motor Battery pack capacity (Ah) -
• Adjustable cutting width from 25-30cm for great versatility when grass No. of batteries supplied 1 • Excellent cutting quality through precision 55cm laser cut, No. of batteries supplied 0
Charger supplied 45 min Charger supplied −
& weed cutting diamond ground blades
Cutting path width [cm] 25-30 Max. cutting capacity (mm) 22
• 18V Lithium power with patented IntelliCell™ technology which Line feed system Auto feed
• Capable of cutting large branches with 22mm blade gap, and Blade speed (rpm) 2700
individually monitors and balances each cell to maximise runtime, Weight with battery pack (kg) 3.2 sawing function Blade length [cm] 55
storage life and safety Article Number 5133002103 • Anti-jamming system prevents accidential blocking Battery type −
• EasyEdge™ feature allows the user to quickly transition between EAN Code 4892210820792 • Rotating rear handle offers ease of use in multiple positions Weight with battery pack (kg) 2.8
edging and trimming modes • HedgeSweep™ attachment offers easy removal of clippings Article Number 5133002161
• Telescoping boom and adjustable handle provides comfort for all Standard equipment (RLT1830H13) • As part of the ONE+ System, the 18V ONE+ battery EAN Code 4892210821249
users 1-pack auto feed spool, 8m cable • is compatible with all home & garden tools in the
• As part of the ONE+ System, the 18V Lithium+ battery is compatible cordless system Standard equipment (OHT1855R)
with all home & garden tools in the cordless system • Sold as a bare unit, without battery and charger HedgeSweep™ attachment, blade
sheath
Also Available as
18V Hybrid Line Trimmer, 30cm Cutting Width 18V Hybrid Grass Trimmer, 30cm Cutting Width
(1x2.5Ah) (1x1.5Ah)
Name: Product Code: EAN Code: Name: Product Code: EAN Code:
RLT1830H25 5133002224 4892210821638 RLT1830H15 5133002460 4892210136626
OLT1831S RHT1851R15
18V Cordless Grass Trimmer, 30cm Cutting Width 18V Cordless Hedge Trimmer, 50cm Blade
• 18V Lithium power with patented IntelliCell™ technology which Voltage (V) 18 • High Torque motor delivers powerful cutting performance for pruning Voltage (V) 18
individually monitors and balances each cell to maximise run time, Battery pack capacity (Ah) - hedges & shrubs Battery pack capacity (Ah) 1.5
storage life and safety No. of batteries supplied 0 • Excellent cutting quality through precision 50cm diamond ground No. of batteries supplied 1
Charger supplied − Charger supplied 60 min
• Adjustable cutting width from 25-30cm for great versatility when grass blades
Cutting path width [cm] 25-30 Max. cutting capacity (mm) 18
& weed cutting Line feed system Auto feed
• Capable of cutting large branches with 18mm blade gap, and sawing Blade speed (rpm) 2700
• EasyEdge™ feature offers quick transition between edging and Weight with battery pack (kg) 2.2 function Blade length [cm] 50
trimming modes Article Number 5133002162 • Anti-jamming system prevents accidential blocking Battery type Li-ion
• Telescoping boom and adjustable handle provides comfort for all EAN Code 4892210821195 • Rotating rear handle offers ease of use in multiple Weight with battery pack (kg) 3.15
users positions Article Number 5133002110
• Three position pivoting string head for more versatile cutting Standard equipment (OLT1831S) • HedgeSweep™ attachment offers easy removal EAN Code 4892210820754
• As part of the ONE+ System, the 18V Lithium+ battery is compatible 1-pack auto feed spool of clippings
with all home & garden tools in the cordless system • As part of the ONE+ System, the 18V Lithium+ Standard equipment (RHT1851R15)
battery is compatible with all home & garden tools in the cordless HedgeSweep™ attachment, blade
system sheath
RLT1825LI OHT1850X
18V Cordless Grass Trimmer, 25cm Cutting Width 18V Cordless Extended Reach Hedge Trimmer 50cm Blade
• Powered by 18V Lithium batteries • 4-position articulating head for pruning all sizzes of hedges & shrubs Voltage (V) 18
• 25cm cutting path for efficient grass & weed cutting Voltage (V) 18 • Rotating rear handle for optimum reach in all cutting applications Battery pack capacity (Ah) -
• EasyEdge™ design for quick transition to edging mode • Central trigger for easy use in extended reach position No. of batteries supplied 0
Battery pack capacity (Ah) 1.3
Charger supplied −
• Two handle design for improved user comfort No. of batteries supplied 1 • HedgeSweep debris sweeper for easy removal of clippings
Max. cutting capacity (mm) 16
• As part of the ONE+ System, the 18V Lithium+ battery is compatible Charger supplied 3 hr • As part of the ONE+ System, the 18V Lithium+ battery is compatible Stroke rate (spm) 2400
with all home & garden tools in the cordless system Line feed system Auto feed with all home & garden tools in the cordless system Blade length (cm) 50
Cutting path width [cm] 25cm
Weight with battery pack (kg) 3.73
Cutting line diameter (mm) 1.6
Article Number 5133001249
Weight with battery pack (kg) 1.65
EAN Code 4892210815439
Article Number 5133001807
EAN Code 4892210818430
Standard equipment (OHT1850X)
Standard equipment (RLT1825LI) HedgeSweep™ blade sheath
1-pack auto feed spool
Also Available as
02
28 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 29
03
#RyobiToolsUK
ONE+ Garden Tools Battery Technology ryobitools.co.uk
OPT1845
18V Cordless Pole Hedge Trimmer
• Powerful cutting performance due to premium 18V motor Voltage (V) 18V
Battery Technology
• 45cm diamond ground blades for clean cutting Battery pack capacity (Ah) -
• Capable of cutting large branches with 18mm blade gap No. of batteries supplied 0
• 135° articulating cutting head, with 4 positions for versatile trimming Charger supplied −
Blade length (mm) 450
• Removable extension shaft for full length of 2.3m, or compact storage
Blade speed (rpm) 1500
Cutting capacity 18mm
Weight without battery pack
4.2
(kg)
Article Number
EAN Code
5133002523
4892210138521 The System: 40 tools powered
Standard equipment (OPT1845)
HedgeSweep, blade sheath, single
by the largest range of Lithium batteries.
shoulder strap harness
IntelliCell™
Monitors and balances High Power Cells
each cell so no energy is
wasted. It maximises runtime A first for the DIY market!
and improves your tool’s Energy flows easily through
OBL1802 performance by up to 10%! the cells when required in
18V Cordless Blower high bursts for increased
performance.
• High speed nozzle provides airflow speed of 193km/h Voltage (V) 18
• Lightweight design, with ultimate cordless convenience Battery pack capacity (Ah) -
• GripZone™ overmould for comfortable grip No. of batteries supplied 0
Charger supplied −
• As part of the 18V ONE+™ system, the 18V ONE+ battery is
Airflow speed (km/h) 193
compatible with all home & garden tools in the cordless sytem Weight with battery pack (kg) 1.6
Article Number 5133000731
EAN Code 4892210812605
RB18L15
18V 1.5Ah Lithium+ Battery
• Powerful 1.5Ah Lithium+ battery gives more power, longer runtimes Article Number 5133001905
and better durability than previous lithium technologies. EAN Code 4892210124081
• 4 Stage fuel gauge displays remaining power (100%, 75%, 50%, 25%)
• IntelliCell™ technology monitors and balances individual cells to
maximise run-times, storage life and safety
• Tough pack design with built in impact protection for long term
durability
• Drive up to 528 4x40mm screws with RCD1802
• Cross-cut up to 72 pine 2x6’s (50*150mm) with R18CS
• Runtime can vary by tool, battery and application
• Powerful 5.0Ah Lithium+ battery gives more power, longer runtimes Article Number 5133002433 • Powerful 1.3Ah Lithium battery Article Number 5133001904
and better durability than previous lithium technologies EAN Code 4892210135940 • Tough pack design with built in impact protection for long EAN Code 4892210124074
• 4 Stage fuel gauge displays remaining power (100%, 75%, 50%, 25%) term durability
• IntelliCell™ technology monitors and balances individual cells to • Drive up to 426 4x40mm screws with RCD1802
maximise run-times, storage life and safety • Cross-cut up to 49 pine 2x6’s (50*150mm) with R18CS
• Tough pack design with built in impact protection for long term • Runtime can vary by tool, battery and application
durability
• Drive up to 1622 4x40mm screws with RCD1802
• Cross-cut up to 276 pine 2x6’s (50*150mm) with R18CS
• Runtime can vary by tool, battery and application
18V Battery and Charger Kit (1x1.3Ah) 2 x 18v (1.3Ah) Lithium-ion Batteries & Super
Charger
Name: Product Code: EAN Code: Name: Product Code: EAN Code:
RBC18L13 5133001908 4892210124159 RBC18LL13 5133002000 4892210125835
RB18L40 BCL14181H
18V 4.0Ah Lithium+ Battery 18V ONE+ Charger
• Powerful 4.0Ah Lithium+ battery gives more power, longer runtimes Article Number 5133001907 • Dual chemisty charger for use with all Ryobi 18V batteries Article Number 5133001127
and better durability than previous lithium technologies. EAN Code 4892210124104 • LED charge indicators EAN Code 4892210117991
• 4 Stage fuel gauge displays remaining power (100%, 75%, 50%, 25%) • Maintenance mode - Batteries stored on charger are conditioned for
• IntelliCell™ technology monitors and balances individual cells to peak performance
maximise run-times, storage life and safety • Charges batteries within a temperature range of 0°C to 50°C
• Tough pack design with built in impact protection for long term
durability
• Drive up to 1322 4x40mm screws with RCD1802
• Cross-cut up to 211 pine 2x6’s (50*150mm) with R18CS
• Runtime can vary by tool, battery and application
18V Battery and Charger Kit (1x4.0Ah) 18V Battery and Charger Kit (2x4.0Ah)
Name: Product Code: EAN Code: Name: Product Code: EAN Code:
RBC18L40 5133001912 4892210124210 RBC18LL40 5133001916 4892210124234
RB18L25 BCS618
18V 2.5Ah Lithium+ Battery 18V ONE+ 6 Port Charger
• Powerful 2.5Ah Lithium+ battery gives more power, longer runtimes Article Number 5133002237 Article Number 5132000042
and better durability than previous lithium technologies. EAN Code 4892210129062 • Multiport charger for efficient battery re-charging EAN Code 4892210106346
• 4 Stage fuel gauge displays remaining power (100%, 75%, 50%, 25%) • Dual chemistry charger for use with all Ryobi 18V batteries
• IntelliCell™ technology monitors and balances individual cells to • LED charge indicators
maximise run-times, storage life and safety • Maintenance mode - Batteries stored on charger are conditioned for
• Tough pack design with built in impact protection for long term peak performance
durability • Charges batteries within a temperature range of 0°C to 50°C
• Drive up to 749 4x40mm screws with RCD1802
• Cross-cut up to 115 pine 2x6’s (50*150mm) with R18CS
• Runtime can vary by tool, battery and application
02
32 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 33
03
#RyobiToolsUK
12V /4V ryobitools.co.uk
RRS12011L
12V Cordless Reciprocating Saw
• 2-in-1 saw with inter-changeable blade to enable the saw to be used Voltage (V) 12
in either reciprocating or jigsaw modes, making it ideal for a range of No. of batteries supplied 1
tasks Charger supplied 60 min
No load speed (rpm) 3200
• Variable speed for optimum control in all applications
Stroke length (mm) 13
• LED to illuminate the work piece
Max. cutting capacity wood
• Fuel gauge to indicate power levels (mm)
60
• Safety lock off switch to avoid accidental starting Weight with battery pack (kg) 1.17
Supplied in Tool bag
Article Number 5133001161
EAN Code 4892210118523
RMT12011L
12V Cordless Multi Tool
• A versatile and compact mulit purpose tool with both sanding and Voltage (V) 12
cutting heads No. of batteries supplied 1
• Quick change attachments for hassle free transition between sanding Charger supplied 60 min
Oscillation angle 3°
and sawing
Oscillation rate (opm) 20,000
• LED to illuminate the work piece
Weight with battery pack (kg) 1.07
• Fuel gauge to indicate power levels Supplied in Tool bag
• Universal accessory adaptor makes the product compatible Article Number 5133001772
with any brand of accessories EAN Code 4892210121431
For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 35
03
#RyobiToolsUK
12V /4V 12V /4V ryobitools.co.uk
R12PS-L13S R4SDP-L13C
12V Cordless Palm Sander (1x1.3Ah) 4V Lithium-Ion QuickTurn Screwdriver
• Ideal for light weight applications such as fine finshing and paint Voltage (V) 12
preparation No. of batteries supplied 1
• Integrated flip down sanding finger to access hard to reach places Charger supplied 60 min
Oscillation diameter (mm) 1.2
• Triangular pad design for sanding up to the edge in tight corners
Oscillation rate (opm) 22,000
• Quick fit hook and loop sanding sheet attachment
Sanding pad size (mm) 124 CM2
• DustTech™ for efficient dust collection Weight with battery pack (kg) 0.76
• Fuel gauge displays remaining battery charge Supplied in Tool bag
• Gripzone+™ overmold for added comfort and control Article Number 5133001836
EAN Code 4892210123008
CSD4030GN
4V Cordless Screwdriver
• Pivot screwdriver ideal for all types of screwdriving tasks around the house
• QUICKTURN mechanism allows for quick change between standard driver to stick driver and easy access to confined areas
• 2 speed gearbox (200 / 600 RPM) to match a wide range of applications
• Two finger trigger and ergonomic GRIPZONE handle for added comfort and control
• Inlcudes 5 x 25mm screwdriving bits to start your next DIY project today
Voltage (V) 4
R4SD-L13C Charger supplied
Max. torque (Nm)
10 hr
5
4V Cordless Screwdriver No load speed gear 1 (rpm) 200
No load speed gear 2 (rpm) 600
Weight with battery pack (kg) 0.67
• Accessories included are ideal for flat pack furniture 1x Hex4,1x PZ2 Voltage (V) 4 Recyclable
Supplied in
• Up to 5 Nm Screwdriving force No. of batteries supplied 1 carton
• Up to 92 Screws Per charge Charger supplied 10 hr Article Number 5133002651
Max. torque (Nm) 5
• Super Bright LED Worklight to illuminate the workpeice EAN Code 4892210143273
No load speed gear 1 (rpm) 180
• Quick change hex chuck for easy bit changes
Tool reception 1/4“ Hex
Weight with battery pack (kg) 0.4 Standard equipment (R4SDP-L13C)
Supplied in Kitbox 5x25mm screwdriver bits ideal for
Article Number 5133001962 flat pack furniture
EAN Code 4892210123305
02
36 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 37
03
#RyobiToolsUK
Drilling ryobitools.co.uk
DRILLING RPD500-G
500W Corded Percussion Drill
Percussion Drills 39 – 40
• Variable speed forward & reverse for total control
Rotary Hammer Drills 40 • Compact & lightweight for easy drilling
Power input (W)
Chuck capacity (mm)
500
13
• GripZone™ overmould for positive grip and improved comfort No load speed gear 1 (rpm) 3,000
percussion rate gear 1 0-50,000
Max. drilling wood (mm) 25
Max. drilling steel (mm) 13
Max. drilling masonry (mm) 13
Weight (kg) 1.6
Recyclable
Supplied in
carton
Article Number 5133002244
EAN Code 4892210129284
RPD800-K
800W Corded Percussion Drill
• Variable speed forward & reverse for total control Power input (W) 800
• Compact & lightweight for easy drilling Chuck capacity (mm) 13
• Gripzone™ overmould for positive grip and improved comfort No load speed gear 1 (rpm) 0-3,000
Max. percussion rate (bpm) 0-51,000
• Single sleeve (auto spindle lock) chuck
Max. drilling wood (mm) 34
• LED
Max. drilling steel (mm) 13
Max. drilling masonry (mm) 16
Weight (kg) 1.8
Supplied in Kitbox
Article Number 5133002019
EAN Code 4892210125903
RPD1010-K
1010W Corded Percussion Drill
• Variable speed forward & reverse for total control Power input (W) 1010
• Compact & lightweight for easy drilling Chuck capacity (mm) 13
• GripZone™ overmould for positive grip and improved comfort No load speed gear 1 (rpm) 0-1,200
No load speed gear 2 (rpm) 0-3,200
• Metal gear housing
percussion rate gear 1 0-19,200
• Metal chuck with auto-spindle lock
percussion rate gear 2 0-51,200
• 2-Speed Max. drilling wood (mm) 25/50
• LED Max. drilling steel (mm) 8/13
Max. drilling masonry (mm) 16/20
Weight (kg) 3.05
Supplied in Kitbox
Article Number 5133002059
EAN Code 4892210126757
02
38 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 39
03
#RyobiToolsUK
Drilling ryobitools.co.uk
RPD1200-K
1200W Corded Percussion Drill
GRINDING
Angle Grinders 42
• Variable speed forward & reverse for total control Power input (W) 1200
• Compact & lightweight for easy drilling Chuck capacity (mm) 13
• GripZone™ overmould for positive grip and improved comfort No load speed gear 1 (rpm) 0-1,200
No load speed gear 2 (rpm) 0-3,200
• Metal gear housing
percussion rate gear 1 0-19,200
• Metal chuck with auto-spindle lock
percussion rate gear 2 0-51,200
• 2-Speed Max. drilling wood (mm) 25/50
• LED Max. drilling steel (mm) 8/16
Max. drilling masonry (mm) 18/22
Weight (kg) 3.15
Supplied in Kitbox
Article Number 5133002068
EAN Code 4892210126771
NEW RSDS680-G
680W Corded SDS+ Rotary Hammer Drill
• Pneumatic hammer mechanism delivers 2.1J EPTA of impact energy Power input (W) 680
ideal for drilling holes in stone and concrete. Chuck type SDS+
• 680W motor produces 0-2,150 RPM and 0-5,000 BPM delivering best No load speed (rpm) 0-2,150
Max. percussion rate (bpm) 0-5,000
in class drilling performance of 22mm in concrete.
Max. drilling wood (mm) 30
• SDS+ chuck for fast drilling and easy accessory bit changes
Max. drilling steel (mm) 13
• 4 modes for extra versatility (hammer drill, rotary drill, chisel, chisel Weight (kg) 2.72
alignment) Recyclable
Supplied in
• Compact and Lightweight gives the user maximum comfort and carton
control when drilling. Article Number 5133002635
EAN Code 4892210141934
NEW RSDS800-K
800W Corded SDS+ Rotary Hammer Drill
• Pneumatic hammer mechanism delivers 3.0J EPTA of impact energy Power input (W) 800
ideal for drilling holes in stone and concrete. Chuck type SDS+
• 800W motor produces 0-1,450RPM and 0-5,000BPM delivering best No load speed (rpm) 0-1,450
Max. percussion rate (bpm) 0-5,000
in class drilling performance of 28mm in concrete.
Max. drilling wood (mm) 32
• Compact and Lightweight L-Shape design allows the user to get
Max. drilling steel (mm) 13
closer to the work piece and provides a better balance. Max. drilling masonry (mm) 28
• 4 modes for extra versatility (hammer drill, rotary drill, chisel, chisel Weight (kg) 3.44
alignment) Supplied in Kitbox
• Built-in LED light ensures your work piece is always well lit and clearly Article Number 5133002464
visible EAN Code 4892210136541
02
40 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 41
03
#RyobiToolsUK
Grinding ryobitools.co.uk
NEW RAG600-115G
600W Corded Angle Grinder, 115mm disk
WOODWORKING
Jigsaws / Circular Saws / Mitre Saws / Table Saw 44 – 46
• 600W motor with a high torque gear box
• Class leading grinding speed of 13,000 RPM
Power input (W)
Disc diameter (mm)
600
115
Sanders 47 – 49
• Spindle lock and adjustable 115mm guard for easy wheel and Bore size (mm)
Spindle size M14
22
Multitool / Rotary Tool 49 – 50
accessory changing
• Slim profile and 2 position handle ensures maximum versitility
No load speed (rpm)
Weight (kg)
13,000
2.0
Heat Gun 50
• New Switch Electronics prevent accidental starting when plugged into
power mains by defaulting to off position Supplied in
Recyclable
carton
Planer 50
Article Number 5133002488
EAN Code 4892210142481
NEW RAG800-115G
800W Corded Angle Grinder, 115mm Disk
• Powerful 800W motor with a high torque gear box Power input (W) 800
• Class leading grinding speed of 12,000 RPM Disc diameter (mm) 115
• Spindle lock for easy wheel and accessory changing Bore size (mm) 22
Spindle size M14
• Tool-less 115mm wheel guard for quick and easy adjustment
No load speed (rpm) 12,000
• Slim profile and 2 position handle ensures maximum versitility
Weight (kg) 2.4
• New Switch Electronic prevents accidental starting when plugged into Recyclable
power mains by defaulting to off position Supplied in
carton
Article Number 5133002644
EAN Code 4892210142474
EAG2000RS
2000W Corded Angle Grinder, 230mm Disk
• Full length trigger switch with overmould Power input (W) 2000
• 180° multi-directional rotating back handle for Disc diameter (mm) 230
improved comfort and control Bore size (mm) 22
Spindle size M14
• Tool-less wheel guard for quick and easy adjustment
No load speed (rpm) 6,000
• Two position Auxiliary Handle with wrench storage
Weight (kg) 6.0
• Spindle Lock for easy wheel changing Supplied in Kitbox
• Livetool Indicator™ glows blue when plugged into the Article Number 5133000551
power supply EAN Code 4892210111814
02
42 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 43
03
#RyobiToolsUK
Woodworking Woodworking ryobitools.co.uk
RJS720-G RJS1050-K
500W Corded jigsaw 680W Corded Jigsaw
• Most visible cut line through being compact and slim with forwards Power input (W) 500 • Most visible cut line delivered by slim profile, LED and Power input (W) 680
dust blower clearing the cut line Stroke length (mm) 19 AIRFORWARDS to remove dust Stroke length (mm) 23
• Features such as new flat saw bar, line assist, flush cutting capability No load speed (rpm) 0-3,000 • High accuracy achieved through PRO STROKE mechanism, No load speed (rpm) 500-3,100
Max. cutting capacity wood Max. cutting capacity wood
increases the accuracy of the cut 75 4-stage pendulum action and LINEASSIST 105
(mm) (mm)
• 500W motor with 0-3,000spm produces cut capacities of 72mm Max. cutting capacity steel • SPEEDCONTROL thumb activated speed regulation
6 Max. cutting capacity steel
in wood and 6mm in steel ensuring no compromise is made in (mm) • SURELOCK blade clamp with colour coding makes it clear (mm)
12
Weight (kg) 1.8
performance when the blade is fitted correctly Weight (kg) 2.2
Supplied in −
• FLUSHCUT blade allows user to cut up to the guard Supplied in Kitbox
Article Number 5133002238
EAN Code 4892210129239
• Retractable fin helps straight line accuracy Article Number 5133002220
EAN Code 4892210128362
RJS750-G RWS1250-G
500W Corded Jigsaw 1250W Corded Circular Saw, 66mm Blade
• Most visible cut line delivered by slim profile and AIRFORWARDS to Power input (W) 500 • Compact, lightweight and ergonomic design for comfortable, Power input (W) 1250
remove dust Stroke length (mm) 19 repetitive cutting Blade diameter (mm) 190
• High accuracy achieved through PRO STROKE mechanisms and No load speed (rpm) 0-3,000 • Adjustable base for 0°-45° bevel settings Bore size (mm) 16
Max. cutting capacity wood Max. cutting depth 90˚
LINEASSIST 75 • Adjustable depth setting for efficient cutting 66
(mm) (mm)
• Quick Lock one finger blade clamp allows user to change blade Max. cutting capacity steel • Onboard wrench storage
6 Max. cutting depth 45˚
easily (mm) • Livetool Indicator™ glows blue when plugged into power supply (mm)
50
Weight (kg) 1.8
• Most compact and comfortable jigsaw with ergonomic handle and Bevel capacity (°) 45°
Recyclable
detachable vacuum port Supplied in
carton
No load speed (rpm) 5,000
Weight (kg) 3.7
Article Number 5133002216
Supplied in Kitbox
EAN Code 4892210128300
Article Number 5133002243
EAN Code 4892210129314
Standard equipment (RJS750-G)
1 x Wood Blade, 1 x Hex Key, Standard equipment (RWS1250-G)
x 1 Dust Port
1 x 20-tooth TCT blade, parallel fence,
wrench
RJS850-K EWS1150RS
600W Corded Jigsaw 1150W Corded Circular Saw, 55mm Blade
• Most visible cut line delivered by slim profile, LED and Power input (W) 600 • Adjustable base allows cutting for 0° to 45° bevel settings Power input (W) 1150
AIRFORWARDS to remove dust Stroke length (mm) 23 • Spindle lock for easy blade change Blade diameter (mm) 170
No load speed (rpm) 500-3,100 • Adjustable depth setting for efficient cutting Bore size (mm) 20
• High accuracy achieved through PRO STROKE mechanism,
Max. cutting depth 90° (mm) 55
4-stage pendulum action and LINEASSIST Max. cutting capacity wood
85 • Onboard wrench storage
(mm) Max. cutting depth 45° (mm) 38
• SPEEDCONTROL thumb activated speed regulation • Livetool Indicator™ glows blue when plugged into power supply
Max. cutting capacity steel Bevel capacity (°) 45°
• SURELOCK blade clamp with colour coding makes it clear (mm)
9 No load speed (rpm) 5,600
when the blade is fitted correctly Weight (kg) 2.0 Weight (kg) 4.7
Supplied in Kitbox Recyclable
Supplied in
Article Number 5133002218 carton
EAN Code 4892210128331 Article Number 5133000553
EAN Code 4892210111470
02
44 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 45
03
#RyobiToolsUK
Woodworking Woodworking ryobitools.co.uk
EMS216L EPS80RS
1500W Corded Mitre Saw, 216m Blade 80W Corded Palm Sander
• Powerful 1500W motor for excellent cutting performance Power input (W) 1500 • Ideal for light weight applications such as fine finshing and paint Power input (W) 80
• Forward sliding bars allows user to work up against the wall Blade diameter (mm) 216 preparation Oscillation rate (opm) 12,000
• Extra wide side extensions to support large timber No load speed (rpm) 5000 • Compact 80W motor for maximum performance Oscillation diameter (mm) 1.6
Mitre capacity left (°) 50 Sanding pad size (mm) 99 x 149
• 2 LEDs for maximum visibility of cut line • Integrated flip down sanding finger to access hard to reach places
Mitre capacity right (°) 50 Weight (kg) 0.9
• Exactline Laser Technology for guiding the user and increasing • Triangular pad design for sanding up to the edge in tight corners
Bevel capacity left (°) 47 Supplied in Tool bag
accuracy Bevel capacity right (°) 2 • Quick fit hook and loop sanding sheet attachment Article Number 5133000529
• Ergonomic GripZone for comfortable and fast cuts Weight (kg) 13 • DustTech™ for efficient dust collection EAN Code 4892210111678
• 48T TCT blade that delivers a fine cut finish and maximum depth Recyclable • Livetool Indicator™ - Glows blue when plugged into the power supply
Supplied in
of cut carton
Standard equipment (EPS80RS)
Article Number 5133001257
EAN Code 4892210119377 5 x corner pads, 5 x finger pads
EMS254L EMS180RV
2000W Corded Mitre Saw, 254mm Blade 180W Corded Multi-Pad Sander
• Exactline Laser Technology™ for cutting accuracy Power input (W) 2000 • Ideal for light to medium weight applications such as fine finshing and Power input (W) 180
• 2 LED’s for maximum work area illumination Blade diameter (mm) 254 paint removal Oscillation rate (opm) 6,000–12,000
• Forward sliding bars allow users to work up against a wall Blade type 48-tooth TCT • 3 in 1 sander to suit various applications (Corner, 1/3 sheet & flip Oscillation diameter (mm) 2
No load speed (rpm) 4,500 Sanding pad size (mm) -
• Easily stored and transported thanks to ultra compact design down finger)
Mitre capacity left (°) 50 Weight (kg) 1.4
• Powerful 2000 Watt motor, producing 4.500rpm • Powerful 180W motor for maximum performance
Mitre capacity right (°) 50 Supplied in Tool bag
• Extra wide side extensions to support large timber Bevel capacity left (°) 47 • Variable speed (6,000-12,000 rpm) to optimise surface finish Article Number 5133000531
• 50 degree left and right mitre capacity Bevel capacity right (°) 2 • Cyclonic action dust box for efficient dust collection EAN Code 4892210111692
Weight (kg) 16.2 • Quick fit hook and loop sanding sheet attachment
Supplied in Recyclable carton • Livetool Indicator™ - Glows blue when plugged into the power supply
Article Number 5133001203 Standard equipment (EMS180RV)
EAN Code 4892210119155 5 x corner pads, 5 x third-sheet pads,
5 x finger pads
RTS1800EF-G ESS200RS
1800W Corded Table Saw with Wheeled Stand 200W Corded 1/3 Sheet Sander
• Poweful 1800W motor for easy cutting Power input (W) 1800 • Ideal for light to medium weight applications such as fine finshing and Power input (W) 200
• Die cast aluminium table for perfect support and accurate cutting No load speed (rpm) 4,500 paint removal Oscillation rate (opm) 12,000
• Extendable side fence allows increased material support up to Blade width (mm) 254 Oscillation diameter (mm) 2
• Powerful 200W motor for maximum performance
Blade type 48-tooth TCT Sanding pad size (mm) 93 x 185
480mm • 1/3 sheet rectangular base ideal for sanding closer to edges and over
Bore size (mm) 30 Weight (kg) 1.5
• Front and rear locking side fence for accurate and precise cutting larger surfaces
Max. cutting depth 45° (mm) 55 Supplied in Recyclable carton
• Dual purpose handle for quick and easy height and/ or bevel Max. cutting depth 90° (mm) 80 • Sand paper attaches through either quick fit hook and loop system or Article Number 5133002245
adjustment Table dimensions with manual clamps for added versatility EAN Code 4892210129277
560 x 710
• Overload protection ensures long term durability and added safety extensions (mm) • Cyclonic action dust box for efficient dust collection
• Soft start ensures the product is easy to use and protects long term Weight (kg) 26.8 • Livetool Indicator™ glows blue when plugged into the power supply
Standard equipment (ESS200RS)
durability Supplied in
Recyclable
carton 2 x 60, 1 x 100 and 1 x 150 grit sanding
• Mitre gauge allows precise angle to be cut quickly and easily
Article Number 5133002026 sheets
between +60° and -60°
EAN Code 4892210126009
• Built in tool box for additional accessory storage
• Deluxe collapsible stand with wheels for easy storage and
transportation Standard equipment (RTS1800EF-G)
48-tooth TCT blade, Deluxe collapsible
stand
02
46 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 47
03
#RyobiToolsUK
Woodworking Woodworking ryobitools.co.uk
ESS280RV EBS800V
280W Corded 1/3 Sheet Sander 800W Corded Belt Sander
• Ideal for light to medium weight applications such as fine finshing and Power input (W) 280 • Ideal for heavy duty applications over large areas such as flooring or Power input (W) 800
paint removal Oscillation rate (opm) 7,000-12,000 substantial stock removal Belt speed (rpm) 150-320
• Variable speed (7,000-12,000 rpm) to optimise surface finish Diameter of orbit (mm) 2 • 76mm (3”) belt with a powerful 800W motor for rapid stock removal Belt width (mm) 76
Sanding pad size (mm) 93 x 185 Sanding pad size (mm) 76 x 150
• Powerful 280W motor for maximum performance • Variable speed (150-320 m/min) for total control during all sanding
Weight (kg) 1.7 Weight (kg) 3.3
• 1/3 sheet rectangular base ideal for sanding closer to edges and over applications
Supplied in Tool bag Supplied in Kitbox
larger surfaces Article Number 5133000535
• Tool free sanding belt change system for ease of use Article Number 5133001147
• Sand paper attaches through either quick fit hook and loop system or EAN Code 4892210111739 • Cyclonic action dust box for efficient dust collection EAN Code 4892210118295
manual clamps for added versatility • 4 position adjustable handle for comfort and control
• Cyclonic action dust box for efficient dust collection • Automatic tracking to keep the sanding belt centralised, saving time
Standard equipment (ESS280RV) Standard equipment (EBS800V)
• Livetool Indicator™ glows blue when plugged into the power supply and ensuring a better finish
2 x 60, 1 x 100 and 1 x 150 grit sanding 1 x 60 grit sanding sheet, 1 x 100 grit
sheets
• Gripzone+™ overmold for added comfort and control sanding sheet, 1 x 120 grit sanding
• Livetool Indicator™ glows blue when plugged into power supply sheet, 2 x G-clamps, sanding frame
• Powerful 240W motor Power input (W) 240 • Most versattile power tool with 300W motor, lets you complete a
• Quick-fix hook and loop sanding sheet attachment with paper clamps Oscillation rate (opm) 14,000 variety of differernt jobs with the change of the accesory head
• Die-cast aluminium base for strength and durability Diameter of orbit (mm) 1.6 • 3.2° oscillation angle optimised for cutting speed and smooth finish.
Sanding pad size (mm) 110 x 114 • 4 Position articulating head offers the user increased versitility of
• Overmould ON/OFF switch for durability and ease of use
Weight (kg) 1.6
• Compact palm grip handle for added comfort angle for applications in tight to reach areas.
Supplied in Kitbox
• DustTech™ Integrated dust technology system for maximum pick-up • Tool less blade change.
Article Number 5133000348
efficiency EAN Code 4892210111074 • Universal accessory adaptor makes the product compatible with
• Livetool Indicator™ glows blue when plugged into power supply any brand of accessories.
• Built-in LED light ensures your work piece is always well lit and
Standard equipment (EOS2410NHG) clearly visible.
2 x 60, 2 x 100 and 2 x 150 grit sanding
• A must have tool in any DIY’ers toolbox
sheets, paper punch pad, dust bag
• Included 30 piece accessory set gives you everything you need
straight out of the box
Available Q3 2016
Power input (W) 300
02
48 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 49
03
#RyobiToolsUK
Woodworking ryobitools.co.uk
EHT150V
150W Corded Rotary Tool with 115 Accessories
ACCESSORIES
Drilling & Driving Accessories 52 – 55
• Powerful 150W motor
• Variable speed to maximise control for the widest number of
Power input (W)
No load speed (rpm)
150
10,000-35,000
Cutting Accessories 55 – 56
applications Collet capacity (mm)
Weight (kg)
3.2 mm and 1.6 mm
0.58
Grinding & Polishing Accessories 56 – 57
• Spindle lock for fast and easy accessory change
• Livetool Indicator™ glows blue when plugged into power supply
Supplied in
Article Number
Kitbox
5133001134
Sanding Accessories 57 – 58
EAN Code 4892210118127 Tiling Accessories 58
Standard equipment (EHT150V)
115 accessories including a flex shaft
and bench clamp
EHG2000
2000W Corded Heat Gun
• Versatile heat gun creates a jet of very hot air that softens adhesives Power input (W) 2000
to remove paint and varnises or dries wet paint Air flow (l/min) 250/500
• Removable front heat shield allows easy changes between Weight (kg) 0.7
accessories Supplied in Recyclable carton
Article Number 5133001138
• Two air flow settings
EAN Code 4892210118158
• Two heat settings 400°C / 600°C
• Overheat protection sensor
• Convenient hanging hook Standard equipment (EHG2000)
2 x nozzles
EPN7582NHG
750W Corded Planer
• Ideal for flattening and smooth rough wood surfaces Power input (W) 750
• 3 chamfering grooves (0.5,1,1.5mm) in die-cast front shoe for added Planing depth (mm) 2
precision Planing width (mm) 82
Rebate depth (mm) 0-12
• Double sided fence for precision planing
No load speed (rpm) 16,000
• Overmould dust extraction switch for left or right port
Weight (kg) 3.2
• Full length trigger with overmould for greater control Supplied in Kitbox
• DustTech™ Integrated dust technology system for maximum pick-up Article Number 5133000353
efficiency EAN Code 4892210111128
• Livetool Indicator™ glows blue when plugged into power supply
Standard equipment (EPN7582NHG)
2 x TCT blades, dust bag, side fence,
wrench
02
50 For further technical specifications, including noise and vibration data, please visit our website: www.ryobitools.co.uk 51
03
#RyobiToolsUK
Accessories Accessories ryobitools.co.uk
RAK17SCD RAK28SDI
17 Piece Screwdriver Kit 28 Piece IMPACT Screwdriving Set
Drilling & Driving Accessories
• 16x 25mm Colour Coded Screwdriver Bits & 1x 60mm Magnetic • Screwdriver Bits: 18x 25mm, 8x 50mm, 1x 89mm. 1x 60mm
Bit Holder Magnetic Bit Holder & 2x Socket Adaptors
• 15 x 25mm PZ2 Impact Rated Screwdriver Bits • Ideal for “Flat Pack Furniture” • 9 x 25mm Screwdriver bits (3 x Philips PH1-PH3, 3 x Pozidrive • 95 pcs foldable kit that includes accessories for all screwdriving
applications PZ1-PZ3, 3 x slotted 4-6mm). 1 x 60mm Magnetic Bit Holder. 4 tasks as well as wood, metal, plastic and masonry drilling
x Non Magnetic Nut Drivers (1 x 6mm, 1 x 8mm, 1 x 10mm, 1 x • Includes nut driver set for working with nuts, bolts and hex head
12mm). 5 x Wood Boring Brad Point Drill Bits (1 x 3mm, 1 x 4mm, fasteners
1 x 5mm, 1 x 6mm, 1 x 8mm). 5 x Masonry Drill Bits (1 x 5mm, 1
x 5.5mm, 1 x 6mm, 1 x 6.5mm, 1 x 7mm). 6 x HSS Drill Bits (1 x
2mm, 1 x 2.5mm, 1 x 3mm, 1 x 4mm, 1 x 5mm, 1 x 6mm).
• 16x 25mm Screwdriving Bits & 1x 60mm magnetic Bit Holder • Impact hardened bits for longer life • 1 x 5mm SDS Bit, 2 x 5.5mm SDS Bit, 1 x 6mm SDS Bit, 1 x 7mm • Quick lock & release magnetic bit holder for secure grip
SDS Bit, 1 x 8mm SDS Bit, 1 x 10mm SDS Bit, 1 x 12mm SDS Bit • Handy belt clip for each access to screwdriver bits
02
52 53
03
#RyobiToolsUK
Accessories Accessories ryobitools.co.uk
• 7x 50mm Screwdriver Bits. 2x Philips (PH1 – PH2). 2x Pozidrive • 32 X 25mm IMPACT Screwdriver Bits - 1 x PH1 / 2 x PH2 / 1 x PH3 • Handy fold out kit that inlcudes accessories for all screwdriving • Handy fold out kit that includes accessories for all screwdriving
(PZ1 – PZ2). 3x Torx® (TX10 – TX20), 1x 60mm Magnetic Bit Holder. / 2 x PZ1 / 2 x PZ2 / 2 x PZ3 / 1 x SL 5 / 2 x SL 6 / 1 x SL 7 / 1 x SL6 tasks as well as metal, plastic and masonry drilling tasks as well as wood, metal, plastic and masonry drilling
/ 1 x Hex3 / 1 x Hex 4 / 1 x Hex 5 / 1 x Hex 6 / 1 x TX6 / 1 x TX7 / 1 x • Includes 3-10 mm brad point drill bits for wood applications
TX8 / 1 x TX9 / 2 x TX10 / 2 x TX15 / 2 x TX20 / 2 x TX25 / 1 x TX30
/ 1 x TX40. 7 X 50mm IMPACT Screwdriver Bits - 1 x PH1 / 1 x PH2
/ 1 x PZ1 / 1 x PZ2 / 1 x TX10 / 1 x TX15 / 1 x TX20. 1 X Magnetic
Bit Holder.
RAK19HSS RAK08BP
19 Piece HSS Drill Bit Set 8 Piece Brad Point Drill Bit Set
Cutting Accessories
• 19 x HSS Drill Bits (1 x 2mm, 2 x 2.5mm, 2 x 3mm, 2 x 3.5mm, 2 x • 8 x Wood-boring brad point drill bits (1 – 10mm)
4mm, 2 x 4.5mm, 2 x 5mm, 2 x 6mm, 1 x 7mm, 1 x 8mm, 1 x 9mm,
1 x 10mm)
• Mixed drilling/driving bit set • Compact kit that includes accessories for screwdriving as well as • Tungsten carbide teeth for faster and sharper cuts • Fits Models: LCS180, RWSL1801
metal, plastic and masonry drilling • 40 teeth give a smoother finish to the application
• Designed and optimised for Cordless: Ultra Thin Blade with
1.6mm kerf
• Fits model R18CS
02
54 55
03
#RyobiToolsUK
Accessories Accessories ryobitools.co.uk
• Fits RWS1250/1400/1600, EWS1266/1366 • Tungsten carbide teeth for sharper and faster cuts • Fits Model: EAG2000RS • Ideal set for polishing and removing wax, cleaning and drying
• 48 teeth give a smoother finish to the application surfaces
• Fits model EMS216L and other saws • 1 x Buffing Bonnet, 1 x Polishing Bonnet
SB254T48A1 RAK10JSB
254mm Mitre saw Blade 10 piece Mixed Jigsaw Blade Set
Sanding Accessories
• Tungsten Carbide teeth for faster & sharper cuts • Universal shank fitment make it compatible with any jigsaw
• 48 teeth give a smoother finish to the application • Ideal for wood, metal and plastic applications
• Fits EMS254L, RTS1800, RTMS1800 and other saws • Includes a variety of blades (6-24 TPI) that give a different finish to
suit your application
SPS20A SCS10A
Grinding & Polishing Accesories 20 x Palm Sanding Sheets 10 x Triangular Detail Sanding Sheets
02
56 57
03
#RyobiToolsUK
Accessories ryobitools.co.uk
Ryobi
Garden Tools
BSS76A2 BSS100A2
2 x 76mm Sanding Belt 2 x 100mm Sanding Belt
RAK05MT
Tiling Accessories Universal 5 piece Multi-tool blades set
• 28mm Plunge Cut Blade, 20mm Bi-metal Plunge Cut Blade, Grout
Removal Blade, 30G Carbide Rasp, 26mm Scrapper Blade
• Includes bag for storing blades after use
02
58 59
03
ONE Battery
40+Tools
Endless Posibilities
@RyobiToolsUK