AC/AC CPS systems require double conversion with additional inverter modules and components, increasing risks. They have limited redundancy, non-addressable chargers, and no battery string monitoring. AC/DC CPS systems have optimized and addressable battery sizing, plug-and-play modules, automatic insulation and earth leakage monitoring, and up to 200 programmable switching inputs per panel for luminaire control across panels. While AC/AC CPS can provide full light output in emergencies, AC/DC CPS allow programming emergency light levels from 10-100% and comply better with new safety standards.
AC/AC CPS systems require double conversion with additional inverter modules and components, increasing risks. They have limited redundancy, non-addressable chargers, and no battery string monitoring. AC/DC CPS systems have optimized and addressable battery sizing, plug-and-play modules, automatic insulation and earth leakage monitoring, and up to 200 programmable switching inputs per panel for luminaire control across panels. While AC/AC CPS can provide full light output in emergencies, AC/DC CPS allow programming emergency light levels from 10-100% and comply better with new safety standards.
AC/AC CPS systems require double conversion with additional inverter modules and components, increasing risks. They have limited redundancy, non-addressable chargers, and no battery string monitoring. AC/DC CPS systems have optimized and addressable battery sizing, plug-and-play modules, automatic insulation and earth leakage monitoring, and up to 200 programmable switching inputs per panel for luminaire control across panels. While AC/AC CPS can provide full light output in emergencies, AC/DC CPS allow programming emergency light levels from 10-100% and comply better with new safety standards.
AC-AC CPS requires Double conversion with additional Inverter Normal operation --> AC to Load Normal operation --> AC to Load modules and additional risk of extra Emergency Operation--> DC to Load Emergency Operation--> AC to Load components/ thyristors/ control gears/ Heat dissipation associated etc.
Battery string monitoring allows
Addressable Chargers Non Addressable Chargers failure of any bank to immediately Redundancy Charging reported for rectification and avoid limited or no redundancy (for smaller ratings) Battery String monitoring for each String as per battery duration failure incase of new draft EN50171 Not available but shows Battery charge fault only. emergency. (currently in new draft proposal EN50171)
Load capacity is based on VA
increased Battery size and space (around 15% Inverter efficiency 85% to Optimized Battery sizing consider 15% on batteries more compared to AC/DC CPS). design.
AC-AC CPS, construction of modules
Comply No so friendly are heavy due to transformers/ Fully encapsulated Plug-n- Play modules with Chargers and Inverter are built in Modules chokes for ease of maintenance. redundant charger modules with reverse feed back Spares to keep occupy ample space protection - Heavy (60kgs) at client premises with difficultly in logistics.
Data Cable required for each sub- station or group LIMITATION Fully addressable without additional Data cables to Additional data cables may be required to Separate panels also required for the Luminaires individual Luminaires to monitor status each group
Contract Drawings need not be
Flexible to add/ modify easily without aid of Limited flexibility as more devices to be added or revised for electrical layout for additional data cabling in the field circuits new circuits to be pulled. changes in field load or luminaire -EXIT and Emergency on same circuit - Optional EXIT and Emergency on same circuit quantity
No separate Earth leakage
Automatic Insultation and Earth Leakage monitoring required for AC-DC monitoring at each output Circuit level as standard Not available. CBS - Improved Safety
The high frequency ballasts, as per
EN 60598-2-22, suitable for operating HF Gear ballast allows up to 100% Light output HF Gear ballast allows upto 100% Light output on CBS, ensures the percentage of the light output. If the Ballast Lumen Factor(BLF) is 1 during emergency then the output is identical in AC-DC & AC systems
This feature allows energy conservation, by enabling a high Comply Comply wattage luminaire to be programmed -Pre-defined - No control on DALI signal, able to switch to provide a pre-set percentage Emergency converted Luminaire to 100% lumens output during Emergency (e.g. A emergency mode (10- 100%) for DALI output during Emergency mode 36W luminaire can be set to provide based concepts as per project requirements 18W or 50% during Emergency)
The free programming facility
AC-DC CBS can programmed up to 200 freely max Upto 8 inputs per module to provide Sub ensures that one (1) switch can turn programmable switching inputs per panel circuit monitoring possible ON the entire luminaire load on the Can able to influence Luminaire activation across - Not possible to influence Luminaire activation Panel & also one light. Moreover, the Panels across the panels/. each luminaire can be assigned two switching inputs
New amendments are expected
Updated as per New EN50171 to release on Jun/Jul2021 in Not available., EN50171 standards Upto 4 strings monitoring possible in real time - More safety requirements - Better security functions Battery Block Monitoring offer Comply complete Peace of mind for client - Offers wireless technology to provide proactive Not Available investment for 10 years as per and real time battery block maintenance features Battery design life and alert intime to with email Alert functions avoid any situations leading premature failures.