Professional Documents
Culture Documents
Maximum bending moment: (Ref: Formula No.-16 of Ch. 13 -Design Of Rectangular Tank )
Mmax = 0.0642*Pd*b*Hy2 = 0.06 kNm
Required section modulus:
Zr = Mmax/Sa = 5.27E-07 mm3
= 0.53 cm3
Section modulus of used stiffener (angle 50x50x6):
Z = 3.61 cm3
Therefore, Vertical stiffener is satisfactory
b b b b
a
a
Height (H)
a
a
Moment inertia required: (Ref: Formula No.-9 of Ch. 13 -Design Of Rectangular Tank )
Jmin = R1*b4/(192*E*ta) = 104.32 mm4
= 0.0104 cm4
Moment inertia of used stiffener (angle 50x50x6):
Jx = Jy = 12.8 cm4
Therefore, Top edge stiffener is satisfactory
Page 4 of 40