Professional Documents
Culture Documents
Plug-In Busway
Plug-In Busway
1 2 3
bS
SUSPEND CABLES ASSEMBLE ATTACH HANGERS busSTRUT
(CG-XX)
ATTACH CABLE ASSEMBLY
HANGERS TO CABLES
to STRUCTURE (HM-S) (CG-XX)
SUSPENDING
*It is the contractor and/or engineer's responsibility
FEED CABLES THROUGH
to determine correct connection to structure (beam ASSEMBLE HANGERS AND
GLIDE TO ATTACH
clamp, etc). ATTACH CABLE GLIDE
PRINCIPAL IN CHARGE:
busSTRUT
LOOSEN BARREL NUT CHECKED BY:
ISSUED FOR:
SUSPENDED
joists. Insert busSTRUT lengths
HANGERS
FOOD LION
BE SURE TO FOLLOW
busSTRUT MOUNTING
RULES (SEE busSTRUT
shop drawings)
CUT CABLE
STEP 2
CLICK BUTTON BELOW Leave enough pass
through cable for
future leveling
ENGINEERING OR ELECTRICAL
CONNECTING busSTRUT JOINER CONNECTING busSTRUT
ARCHITECTURAL /
JOINERS (M-JB) etched centerline on joiner
Joiners are used to mechanically
DRAWINGS
busSTRUT
and electrically connect individual sleeve
busSTRUT lengths.
**Installation Instruction Guidelines are provided only as that, informative guidelines. Defer to architectural/engineering drawings tailored to the specific project. DRAWING NUMBER
E-b01
STEP 3
R1
CLICK BUTTON BELOW
CHECKED BY:
DRAWN BY:
B1
ISSUED FOR:
ENGINEERING OR ELECTRICAL
SHOP DRAWING SET(ONLY)
NOT A REPLACEMENT FOR
Seat the jumper into the busSTRUT by Connect SO Cord to power
ARCHITECTURAL /
First, clip the jumper to the crossover. squeezing tightly on one side and turning the the system.
knob. Then, turn the other knob to complete
DRAWINGS
busSTRUT
the circuit.
PAPER SIZE:
ARCH E (48x36)
NOT TO SCALE
**Installation Instruction Guidelines are provided only as that, informative guidelines. Defer to architectural/engineering drawings tailored to the specific project.
DRAWING NUMBER
E-b02