Professional Documents
Culture Documents
Primer - an coating that increases adhesive strength, enhances the adhesion of natural nails with gel polish. It works on the
principle of double-sided tape. Our primer is acid-free, which means it will not damage the nail and skin.
⠀
�Applied after the dehydrator.
�Air dry. No need to use UV LED lamp.
�Leaves an adhesive layer after drying.
Clear Top Coat Series
� �
Suitable for novice and veteran. Ideal for complex designs. Will not distort colors.
Has self-leveling characteristics. The matte effect is not only visual, but also resembles expensive velvet
Does not detach on soft and thin nails. when touched.
The silicone, which is part of the composition, gives special flexibility. The coating spreads evenly, without sagging and leaves no gaps in the
It becomes glossy immediately after drying, against chips and scratches, prevents application. One layer is enough. No need to use a regular top coat. Can
color fading, and gives nails strength. cover the entire nail and design.
Formulated with UV filter to prevent yellowing. Here are its advantages over analogues:
Combines perfectly with other brands of gel polishes. - the matte effect is noticeable not only visually, but also when touched;
⠀ - keeps matte up to 4 weeks;
� - will not distort colors;
Forms a durable plastic shield that protects the nail not only from aggressive - distributed evenly, without gaps;
substances, but also from brittleness. - one layer is enough;
The consistency is thicker than most tops, but can form a uniform layer. Will not - no need to use a regular top coat.
spread.
Combines perfectly with other brands of gel polishes.
Does not pull pigment from the colored layer.
Stays shiny for 3-4 weeks.
The sticky layer will disappear when done. Feels smooth, Scratch resistant, Super
shiny.
Clear Base Coat Series
�Base Coat- Gold Series
� Clear Base Coat Gold Series has a high viscosity and medium consistency.
� The main advantage is that the base is "cold" and does not cause a burning sensation during
polymerization.
� Silicon in the composition increases the density of the base after polymerization, it becomes more
durable, which prolongs the wear period of the coating.
� Does not have a pungent odor.
� Similar to gel in its properties, but more comfortable to work with.
� Does not flow and self-aligns perfectly.
� After polymerization, it becomes extra hard.
� Excellent in strengthening, repairing and extension.
� Possesses increased adhesion, does not give peeling and chips throughout the entire wearing time of
the coating.
� Possesses a bright gloss, which allows the use of the Hard Si base as an independent coating.