Professional Documents
Culture Documents
Department of Education
Region IV-A CALABARZON
Division of Cavite
EUGENIO CABEZAS NATIONAL HIGH SCHOOL
Trece Martires City
TLE-ICT 7
2nd Periodical Test
A. MULTIPLE CHOICE
Direction: Select the letter of the correct answer. Write your answers on a separate sheet of paper.
1. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly found on
laptop?
a. Anti-static mat c. Philips head screwdriver
b. Torx screwdriver d. Wire cutter
2. Which tool is used to blow away dust and debris from different computer parts without touching the components?
a. Anti-static mat c. Compressed air
b. Hex driver d. Wire cutter
3. Which tool is used to bundle cables neatly inside and outside of the computer?
a. Parts Organizer c. Lint-free cloth
b. Cable Ties d. Compressed Air
4. Which tool is used to test the functionality of printer ports?
a. Multitester c. Philips Screwdriver
b. Loopback Adapter d. Wire Cutter
5. Riza noticed that dusts has been building up on her keyboard. What are the possible cleaning tools she can use to remove these
dust?
a. compressed air, lint-free cloth, makeup brush c. compressed air, part organizer, cable ties
b. compressed air, lint-free cloth, part organizer d. none of the choices can clean the dust
6. Which of the following procedures does NOT show the proper use of a screwdriver?
a. Turn the screwdriver clockwise to tighten the screw.
b. Turn the screwdriver counterclockwise to loosen the screw.
c. Match each screw with the proper screwdriver
d. Use a Philips screw driver when removing a slotted screw.
7. Which of the following is TRUE on the use of part retriever, needle-nose plier, or tweezer?
a. The part retriever, needle-nose pliers, and tweezers can be used to place and retrieve parts that may be hard to reach
with your fingers.
b. These tools are considered as cleaning tools.
c. The part retriever, needle-nose pliers and tweezers can be used to scratch the components.
c. None of these are true.
8. Which of the following shows the proper way cleaning monitors?
a. Do not use ammoniated glass cleaners or any other solution on an LCD screen, unless the cleaner is specifically
designed for the purpose.
b. Be gentle when cleaning them and do not press firmly on the screen.
c. Use a soft, dry cloth to wipe the screen
d. All of the above.
9. This is the systematic care and protection of tools, equipment and machines in order to keep them in a safe, usable condition,
limit downtime and extend productivity.
a. Preventive Maintenance c. Maintenance of Tools and Equipment
b. Occupational Safety and Health d. Proper storage of tools
10. To ensure that tools and equipment remain in good condition and last for a long time, store them properly. Which of the following
is a good practice of proper storage of tools and equipment?
I. Parts should be properly stored and labeled
II. Use bins for storing small parts
III. Consider drawing the shapes of the tools on the board so that they always get put back in the same position.
IV. Consider making an individual (or individuals) responsible for the good maintenance of tools and parts.
1|Page
14. Which of the following statements is TRUE about Random Access Memory (RAM)?
I. It is the temporary storage for data and programs that are accessed by the CPU.
II. It is a volatile memory
III. The more RAM in the computer, the better the system performance.
IV. Its content can be retained even if the computer is turned off.
a. I-II-III-IV c. I-IV-II-III
b. IV-II-III-I d. II-I-IV-III
20. It is a diagram that uses graphic symbols to depict the nature and flow of the steps in a process.
a. Flowchart c. Bar chart
b. Organizational chart d. Process chart
21. It is represented by a small rectangle with curved corners. It appears at the start and at the end of a flowchart.
a. Terminator c. Process
b. Decision d. Arrow lines
22. A flowchart is commonly used by systems analysts to visualize the series of processes in a business system. What are the
benefits of using flowchart?
a. Promote understanding of a process.
b. Provide a tool for training employees.
c. Identify problem areas and opportunities for process improvement.
d. All of the above.
23. Which flowchart best transforms this algorithm of SSG Election?
Algorithm for SSG Election
1. Start
2. Enter name and section.
3. Enter your candidates’ name.
4. Are all electoral positions filled-in?
If Yes: Submit your ballot
If No: Go back to #3.
5. End
a.
c.
2|Page
b. d.
a. Start
Fill up the Enrollment Form
Submit the Enrollment Form with the required documents
Are all the requirements complete?
If yes, “Officially enrolled”
If no, “Temporary enrolled”
End
b. Start
Fill up the Enrollment Form
Submit the Enrollment Form with the required documents
Are all the requirements complete?
End
c. Start
Fill up the Enrollment Form
Submit the Enrollment Form with the required documents
End
25. Elena accidentally tripped on the floor due to the unseen cable running across the floor. The cable running across the floor
imposes what kind of hazard?
a. Physical Hazard c. Chemical Hazard
b. Mechanical Hazard d. Electric-shock hazard
26. It is a planned system of working to prevent illness and injury where you work by recognizing and identifying hazards and risks.
a. Occupational Safety and Health c. Health and Safety Procedures
b. Preventive Maintenance d. Think Safe Steps
27. Which among the following ways can be done to prevent any accident from happening?
a. Eliminate the hazard.
b. Repair the hazard if it is still repairable.
c. Post warning signs.
d. All of the above.
28. Which among the Think Safe Steps means working out how likely it is that a hazard will harm someone and how serious the
harm could be?
a. Spot the hazard c. Make the changes
b. Assess the risk d. 5s
29. Defective chairs with loosened screws and nails were seen in the classroom of Grade 7 Chocolate Hills.. What are the possible
scenarios that may happen if this hazard will not be eliminated or fixed?
I. A student might get his/her skin cut by the nails.
II. A student might bump his/her somewhere once fall from his seat
III. A student might have butt or back injury once he fall from his seat
IV. The chairs might give up anytime soon.
3|Page
30. This concept helps you become productive with good housekeeping. In working with computers, this will help you manage your
files effectively.
a. Occupational Safety and Health c. Evaluating Hazards
b. Think Safe Steps d. Applying 5s
31. What will be the problems you may face if you keep your desktop cluttered like this:
4|Page