Professional Documents
Culture Documents
CCSI Brochure
CCSI Brochure
INDONESIA, Tbk
We are leading optical fiber cable manufacturer in
Indonesia.
It is recognized in the market as a producer of premium
and high-quality products.
What We Do?
We produce various type of optical fiber cable
manufacturer in Indonesia ranging from indoor, outdoor,
special, and submarine cables, also subduct and micro
duct.
Currently we are the only manufacturer cable in
Indonesia that is capable to produce submarine cables.
Each cable is designed for a different application and
conditions.
The fibers are guaranteed to be stress free and without
strain effects during production, storage and
installations to ensure a long cable life time and an
optimum data carrying capacities.
CCSI Factory has annual production capacity of 1.600.000
fiber km.
Our Expertise
PT Communication Cable Systems Indonesia, Tbk
commits to supply the best quality products and services
to our customers. We also provide project execution plan,
engineering, installation, and maintenance services to
fulfill different customer needs.
We are certified for ISO 9001-Quality Management
Systems Certificate,,
ISO 14001 - Environmental Management Certificate,
ISO 18001-Occupational Health and Safety Assessment
Series Certificate
PROFILE 22
1997 2001 2004 2013 2015 2017
1st Export Corning Communication Construction of 1st Commercial Production of Terrestrial
products to
Thailand 3 3
acquisition to
51% of Siemen
AG shares in PT
Cable Systems
International bought
Corning shares
Thermoplastic
Pipe
Manufacturing
Production of
Micro Duct
and Submarine FO Cable
for Government Project
(Palapa Ring Timur)
Siemens Kabel Facility
Optik Following PROFILE
to the
worldwide
acquisition of
cable and
communication
Hardware
operations
MILESTONE 33
CCSI Fiber Optic Cable
What is the basic figures of our cable?
CONTENTS PAGE
Profile 2
Milestone 3
Basic Figures 4
Certificate 5
OPGW Cable 6
www.ccsi.co.id || info@ccsi.co.id
BASIC FIGURES 4
CERTIFICATE 5
Optical Ground Wire Cables(OPGW)
RTS (Rated Tensile
APPLICATION:
Strength) is calculated Ö New over-head ground wire installation
acc to IEC 60794-4-1). Ö Upgrade of the existing ground wires by OPGW
Aerial optical cables for
high voltage power Ö Protect power supply lines for light train
lines. Experimental systems
values are typically 10 –
16% higher ⇣
FEATURES
Ö Withstand high mechanical and electrical loads
Ö Long service life
Ö Small diameter, light weight
Ö Best mechanical protection for optical fiber
Design:
Armoring Wires
Ö Aluminum Alloy (AY)
Ö Aluminum Clad Steel (ACS)
Ö Galvanized Steel Wire (ST)
STANDARD OPGW CABLES (Single – Layer) STANDARD OPGW CABLES (Double – Layer)
Features
1. High Tensile Strength
2. Supporting Strength
Element Figure 8
3. Quick and Easy Installation
4. Suit to small poles and
economical for Accessories
ITEM SPECIFICATION
TECHNICAL SPESIFICATION
LAYING METHOD
OUTDOOR CABLE 7
CCSI STANDARD AERIAL DIELECTRIC SELF
SUPPORTING (ADSS)
APPLICATION:
The Cable is applicable for outdoor, aerial cable on up to
100m span, inside HDPE ducts, or on cable trays or on
cable ladders. The cable does not need any grounding due
to its non-metallic performance.
• Backbone Networks:
Mainly installed at existing high voltage power
transmission line towers with span distance up to
1200 meters.
• Access & Metro Networks:
Installed at electric power distribution or
telecommunication poles with the span distance
40 ~ 150 meters.
Advantages:
• Non Metallic Cable
Eliminates grounding works and no risk of
lightning damages
• Light Weight
Longer cable, easier to handle or install
ITEM SPECIFICATION
TECHNICAL SPESIFICATION
OUTDOOR CABLE 8
DUCT CABLES
Application:
The cable is applicable for outdoor,
underground inside HDPE ducts. The
installation may use manual pulling, air-
assisted (air-blown), or water pressure-
floating method.
Advantages:
Compliance to Telkom Standard
(STEL K – 015 – 2013 Ver 3.0)
ITEM SPECIFICATION
TECHNICAL SPESIFICATION
OUTDOOR CABLE 9
DIRECT BURIED CABLES
Application:
The cable is applicable for outdoor, direct burial,
inside HDPE ducts. Or on cable trays or on cable.
Advantages:
• Rodent Resistant
corrugated steel tape armour to prevent harm
from rodent chew or Resist to permanent
pressure load.
ITEM SPECIFICATION
TECHNICAL SPESIFICATION
OUTDOOR CABLE 10
SUBMARINE CABLES
Application:
The offered cable is UQJ qualified for burial or surface laid.
This cable can be spliced using flexible joint closure or UQJ
or multipurpose joint closure.
ITEM SPECIFICATION
TECHNICAL SPESIFICATION
SPECIAL CABLE 11
MICROCABLE
Micro cable created for the future network, delivers unlimited bandwidth
capacity.
Application:
• Outdoor
• Underground
• Aerial on the pole inside HDPE micro ducts.
The cable installation methods may use manual pulling, air-assisted
(air-blown), water-floating.
Advantage:
• Small cable dimension, reduces cable diameter up to 50% duct
cable
• Cable supply longer ( 4 - 8 km)
• Lower end to end optical loss.
Recommended Installation:
• The cable should be installed inside HDPE microducts.
• The comparison of cross sectional areas between the cable OD and
HDPE
inside diameter shall be not more than 60%
ITEM SPECIFICATION
TECHNICAL SPESIFICATION
SPECIAL CABLE 12
FTTH CABLES
Application:
The cable is applicable for outdoor and indoor, direct burial,
inside ducts, or on cable trays or on cable ladders at harsh
environment. Usually for mining, and oil and gas.
Advantages:
• Anti-Rodent
Corrugated Steel Tape as a rodent bite protection or
Resist to permanent pressure load
• High Tensile Strength
Steel Wire Armor as a tensile strength element
• Flame / Fire Retardant
Compliance to Standard IEC 60332-3-22 (Fire
Conditions Test)
• IEC 61034 (smoke density test)
• IEC 60754 (Halogen acid gas content)
ITEM SPECIFICATION
TECHNICAL SPESIFICATION
INDOOR CABLE 13
GALVANIZED STEEL WIRE
ARMOURED CABLES (GSWA)
Application:
• The Cable is applicable for outdoor and indoor, direct
burial, inside ducts, or on cable trays or on cable ladders
at harsh environment. Usually for mining, and oil and gas.
Advantages:
• Anti-Rodent
• Corrugated Steel Tape as a rodent bite protection or
resist to permanent pressure load.
• High Tensile Strength
Steel Wire Armor as a tensile strength element
• Flame / Fire Retardant
• Compliance to Standard IEC 60332-3-22 (Fire Condition
Test)
• IEC 61034 (smoke density test),
• IEC 60754 (Halogen acid gas content)
ITEM SPECIFICATION
TECHNICAL SPESIFICATION
SPECIAL CABLE 14
HDPE SUBDUCT
Recommended Installation Method:
Underground direct burial installation by open continuous trenching as outdoor
distribution pipe networks.
Advantages:
1. Corrosion Resistance
2. Flexible and Non-Conductive Characteristics
3. Easy to splicing and maintenance
ITEM SPECIFICATION
Jenis Produk:
Subduct HDPE
SUBDUCT 15
HDPE MICRODUCT
Application:
• Outdoor & Indoor
• Direct underground installation in optical fiber cable networks
• For aerial application, the microduct may be lashed on the steel wire rope
between poles.
Product Size:
• Size 8.0 mm up to 16.0 mm
• 2 way configuration bundle up to 19 way
• Standard product refer to IEC 60794-5
ITEM SPECIFICATION
STRAIGHT CONNECTOR
CUSTOM SIZE
MICRODUCT
MICRODUCT 16
MULTI PURPOSE JOINT CLOSURE (MPJC)
FOR ALL SUBMARINE FIBER OPTIC CABLE
Combining the philosophy of submarine power cable joint box with ease of universal joint closure of terrestrial fiber
optical cable, CCSI has developed an unique MPJC (Multi-Purpose Joint Closure).
Made out of high marine grade stainless steel 316 and tested for 30 bar (equivalent to 300 meter water depth), The
MPJC has been passed the CBL load test where 400 kN cable broken meanwhile the closure remain to scratches
ITEM SPECIFICATION
MPJC 17
MANUFACTURING FACILITIES
MANUFACTURING FACILITIES 18
CCSI SERVICES
CCSI SERVICES 19