Professional Documents
Culture Documents
Objectives
To
Apparatus
Theoretical review
Procedure
1. Short-circuit clip was inserted referring to figure 15-17 and short-circuit arrangement diagram
23013-block a.3. 6.2V was applie
d to VIN4.
2. Voltmeter (DCV) was used to measure voltage at output terminal(OUT) as the constant value
(9V).
Results
Step 1, 9.34v
Conclusion
Recommendations
References
EXPERIMENT 2
Objectives
Apparatus
Theoretical Review
Procedure
I. Short-circuit clip was inserted referring to Fig 15-18 and the short-circuit clip arrangement
diagram 23013-bock a.4. 1KΩ (R27) as RL.
II. Reference voltage (V ref) was adjusted to 1V , then ammeter was connected to measure the
value of IL. Then voltmeter was used to measure the output voltage (TP5) of the OPA, and values
were recorded.
III.
“F3 and F4” for the VR2 were pressed shown on the drawing.
IV. RL was changed to 2.2 KΩ(R26), and step 2 repeated.
2.2K
VTP5 1.03V
IL 2.65mA
Conclusion
Recommendation
References