Professional Documents
Culture Documents
Page 1 of 12
Shutdown SIS
Previous Screen
Specifications
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Media Number -SENR2781-01 Publication Date -01/09/1988 Date Updated -11/10/2001
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGINE(... Page 2 of 12
(1) Torque for the ground terminal nut ... 2.3 ± 0.6 N·m 21 ± 5.0 lb in)
(2) Torque for the pulley nut ... 102 ± 7 N·m (76 ± 5 lb ft)
(3) Torque for the output terminal nut ... 7.1 ± 0.9 N·m (64 ± 8 lb in)
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGINE(... Page 3 of 12
Delco-Remy (25SI)
(1) Torque for the pulley nut ... 102 ± 7 N·m (76 ± 5 lb ft)
(2) Torque for the output terminal nut ... 13.5 ± 1.3 N·m (10 ± 1.0 lb ft)
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGINE(... Page 4 of 12
NOTE: There are two types of adjustment: One type of adjustment is made by removing a pipe plug and turning
the adjusting screw one or two notches in a clockwise direction to increase the voltage setting or one or two
notches in a counterclockwise direction to decrease the voltage setting. The second type of adjustment is similar
except, remove the end cover to expose the potentiometer for adjustment.
Delco-Remy (27SI)
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGINE(... Page 5 of 12
Torque for the ground terminal nut ... 9.0 ± 3.0 N·m (80 ± 27 lb in)
Torque for the output terminal nut ... 3.4 ± 0.6 N·m (30 ± 5 lb in)
(1) Torque for the pulley nut ... 100 ± 7 N·m (75 ± 5 lb ft)
(1) Torque for the ground terminal nut ... 9.0 ± 3.0 N·m (80 ± 27 lb in)
(2) Torque for the pulley nut ... 100 ± 7 N·m (75 ± 5 lb ft)
(3) Torque for the output terminal nut ... 3.4 ± 0.6 N·m (30 ± 5 lb in)
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGINE(... Page 6 of 12
Prestolite
(1) Torque for the pulley nut ... 95 to 108.5 N·m (70 to 78 lb ft)
(2) Torque for the terminal nut ... 2.8 to 3.4 N·m (25 to 30 lb in)
(3) Screws of brush holding plate ... 1.1 to 1.7 N·m (10 to 15 lb in)
(5) Bolts holding regulator ... 5.1 to 5.7 N·m (45 to 50 lb in)
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGINE(... Page 7 of 12
(6) Nut for terminal ... 5.1 to 5.7 N·m (45 to 50 lb in)
(7) Nut for positive terminal ... 25 to 28 N·m (225 to 250 lb in)
*
With voltage adjustment screw (1) in position "N" (center). When screw (1) is in position "L", voltage will be
0.5V less. When screw (1) is in position "H", voltage will be 0.5V higher.
Bosch
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGINE(... Page 8 of 12
Torque for the ground terminal nut ... 2.1 to 2.8 N·m (19 to 25 lb in)
(1) Torque for the pulley nut ... 102 ± 7 N·m (76 ± 5 lb ft)
(2) Torque for the output terminal nut ... 13.5 ± 1.3 N·m (10 ± 1 lb ft)
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGINE(... Page 9 of 12
Torque for the ground terminal nut ... 2.1 to 2.8 N·m (19 to 25 lb in)
(1) Torque for the pulley nut ... 95 to 110 N·m (70 to 80 lb ft)
(2) Torque for the output terminal nut ... 12 to 15 N·m (9 to 11 lb ft)
9G7567 Regulator (Bosch Number 1-197-011-000) Under alternator cover. For use with the 7N9720 And
9G9538 Alternators.
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGIN... Page 10 of 12
Nippondenso
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGIN... Page 11 of 12
(1) Torque for the pulley nut ... 95 to 110 N·m (70 to 80 lb ft)
(2) Torque for the output terminal nut ... 22 to 37 N·m (16 to 27 lb ft)
(3) Torque for the ground terminal nut ... 3.4 to 5.4 N·m (31 to 49 lb in)
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007
D7G TRACTOR / POWERSHIFT / 65V04614-UP (MACHINE) POWERED BY 3306 ENGIN... Page 12 of 12
NOTE: Load the battery with a carbon pile (6V4930 Battery Load Tester) to get the maximum alternator output.
(1) Torque for the pulley nut ... 95 to 110 N·m (70 to 80 lb ft)
(2) Torque for the output terminal nut ... 22 to 37 N·m (16 to 27 lb ft)
(3) Torque for the ground terminal nut ... 3.4 to 5.4 N·m (31 to 49 lb in)
7T2798 Regulator (Nippondenso Number 126000-0380) Inside Alternator. For use with 9G4574 and
6T7223 Alternators.
Copyright 1993 - 2007 Caterpillar Inc. Mon Dec 31 13:30:12 UTC+0630 2007
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 31/12/2007