Professional Documents
Culture Documents
Conforming to Certified
EMC Directive (Some models only)
PM-25 SERIES
PM-45 SERIES
PM-65 SERIES
2015.12 panasonic.net/id/pidsx/global
Industry’s First* and Industry’s Top-in-Class*
Advanced Sensors in the Industry.
*
Three protection circuits standard
on all models
Industry’s first PM-25 SERIES PM-45 SERIES PM-65 SERIES
*
Industry’s first!
IP64 rating
Industry’s first PM-25 SERIES PM-45 SERIES
No ridges on
sensing surface
No joint seam
* [Look!]
Large and easy to see
Multi-angle operation indicator All models easy to
Industry’s
top-in-class PM-25 SERIES PM-45 SERIES PM-65 SERIES mount with M3 screws
PM-25 SERIES PM-45 SERIES PM-65 SERIES
The large operation indicator (orange) lights up when
the beam enters. The indicator is easy to see from The sensor unit can be installed with one or
above and from the sides. two M3 screws.
* M3 screws and washers are not included.
Industry’s
Compact size ■ Models requiring two M3 screws for installation
Models other than above
top-in-class PM-45 SERIES
All new models require significantly less mounting space Resistant to vibrations
than our conventional models when mounted with the
same pitch. What's more, the new models can directly and impacts
replace our conventional models currently in use. PM-25 SERIES PM-45 SERIES PM-65 SERIES
2
Translate to the Most
* As of November 2015, according to our company’s survey
APPLICATIONS
*
Ample beam emitting / receiving ■ Positioning of a pallet
distance of 6 mm 0.236 in
Industry’s first PM-25 SERIES PM-45 SERIES PM-65 SERIES
The beam emitting and receiving sections are 0.5 mm 0.02 in thinner than
those on our conventional models while their external dimensions are the
same. As a result, the distance between the beam emitting point and
receiving point increased by 1 mm 0.039 in. The wider distance means
less possibility of collision between the sensing section and sensing object.
13.4 0.528
6 0.236 3.7 0.146 Pallet is stopped by sensing the dog*.
(Unit: mm in)
Overrun
Industry’s first PM-25 SERIES PM-45 SERIES PM-65 SERIES Starting point and overrun is
sensed using the dog* on the base.
The upper-limit and lower-limit positions of beam can be visually ■ Sensing the starting point on a
confirmed from the front, back, right and left sides of the sensor unit. rotating body
This allows easy adjustment of the position of sensing object. Starting
point
The starting
Upper-limit position Beam width point can be
of beam axis sensed by
Lower-limit position Beam width marks are provided on making a slit in
of beam axis PM25 series and PM45 series. the rotating
body.
■Compact / Connector
built-in type PM-65 SERIES Easy connection with a single touch using commercially-available connectors
3
PM-25
Ultra-small / Cable type PM-25 SERIES
1 m 3.281 ft 3 m 9.843 ft 1 m 3.281 ft bending-
Cable type NPN output cable cable resistant cable
M2 / M3 screws!
Type Appearance (mm in) Sensing range Model No. Cable length Output Output operation
PM-K25 1 m 3.281 ft
Easy connection with a single touch
PM-K25-R
1 m 3.281 ft, using
NPNcommercially-available
open-collector connectors
bending-resistant cable transistor
K type
6 0.236
23.9 12.3 PM-K25-C3 3 m 9.843 ft
0.941 0.484
PNP open-collector
PM-K25-P 1 m 3.281 ft
transistor
PM-L25 1 m 3.281 ft
12 0.472
PM-U25 1 m 3.281 ft
PM-F25 1 m 3.281 ft
PM-R25 1 m 3.281 ft
OPTIONS
Mounting screw
Designation Model No. Description
•• MS-M2
Mounting screw with washers for the ultra-small type sensor
Mounting screw MS-M2 (50 pcs. lot). It can mount securely as it is spring washer
attached.
M2 (length 10 mm 0.394 in)
screw with a spring washer
4
PM-25
SPECIFICATIONS
Pollution degree 3
(Note 3, 4)
Ambient humidity 5 to 85 % RH, Storage: 5 to 95 % RH
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The response frequency is the value when the disc, given in the figure below, is rotated.
Disc
t = 0.2 mm 0.008 in
1.6 mm 0.063 in 1.6 mm 0.063 in
3) In case the PM-25 series is used at an ambient temperature of +50 °C +122 °F, or more, make sure to mount it on a metal body.
4) Note that the cable of PM-□25-R loses its flexibility when the ambient temperature decreases to about -10 °C +14 F°.
5) The cable of PM-□25-R is a bending-resistant cable usable on a moving base. When the sensor is mounted on a moving base, secure the sensor cable
joint at the unit in place so that stress is not applied to it.
6) When storing PM-□25-R, make sure that the cable does not come into contact with the sensing section or operation indicator.
7) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
5
Easy mounting with
PM-45
Compact / Cable type PM-45 SERIES M2 / M3 screws!
Compact size!
Type Appearance (mm in) Sensing range Model No. Cable length Output Output operation
PM-K45 1 m 3.281 ft
NPN open-collector
7 0.276 transistor
PM-K45-C3 3 m 9.843 ft
K type
PM-T45 1 m 3.281 ft
NPN open-collector
transistor
PM-T45-C3 3 m 9.843 ft
T type
13.7 0.539
PM-L45 1 m 3.281 ft
NPN open-collector
transistor
PM-L45-C3 3 m 9.843 ft
L type
14.6 0.575
Compact / Cable type
PM-L45-P 1 m 3.281 ft
PNP open-collector
26
1.024 7 0.276 transistor
6 mm 0.236 in
PM-L45-P-C3 3 m 9.843 ft
Incorporated with 2 outputs:
(fixed) Light-ON / Dark-ON
PM-Y45 1 m 3.281 ft
NPN open-collector
14.6 0.575 transistor
PM-Y45-C3 3 m 9.843 ft
Y type
PM-F45 1 m 3.281 ft
NPN open-collector
transistor
PM-F45-C3 3 m 9.843 ft
F type
13 0.512
13.7 21.3 PM-F45-P 1 m 3.281 ft
PNP open-collector
0.539 0.839
transistor
PM-F45-P-C3 3 m 9.843 ft
PM-R45 1 m 3.281 ft
NPN open-collector
13 0.512 transistor
PM-R45-C3 3 m 9.843 ft
R type
Note: The suffix “-C3” in the model No. indicates a 3 m 9.843 ft cable length type.
6
PM-45
SPECIFICATIONS
NPN output
Item PNP output PM-□45-P PM-□45-P-C3
Sensing range 6 mm 0.236 in (fixed)
Pollution degree 3
Ambient temperature –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Environmental resistance
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 3)
Weight Net weight: 10 g approx., Gross weight: 15 g approx. Net weight: 30 g approx., Gross weight: 35 g approx.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The response frequency is the value when the disc, given in the figure below, is rotated.
t = 0.2 mm 0.008 in
1.6 mm 0.063 in 1.6 mm 0.063 in
3) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
7
Compact size!
PM-65
Compact / Connector built-in type PM-65 SERIES
Connector attached cable Connector attached bending-resistant cable
Cable type NPN output 1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft Easy connection with a single touch
Built-in connector PNP output
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft, using commercially-available connectors
3 m 9.843 ft, 5 m 16.404 ft 3 m 9.843 ft, 5 m 16.404 ft
ORDER GUIDE
Type Appearance (mm in) Sensing range Model No. Output Output operation
NPN open-collector
PM-K65
transistor
K type
7 0.276
26 22.4 PNP open-collector
1.024 0.882 PM-K65-P
transistor
NPN open-collector
PM-T65
transistor
13.7 0.539
PNP open-collector
26 22.4 PM-T65-P
1.024 0.882 transistor
T type
22.4
0.882 NPN open-collector
16.7 0.657 PM-T65W
transistor
PNP open-collector
26 PM-T65W-P
1.024 transistor
NPN open-collector
PM-L65
transistor
L type
14.9 0.587
Compact / Connector built-in type
NPN open-collector
14.9 0.587 PM-Y65
transistor
Y type
NPN open-collector
PM-F65
transistor
13.5 0.531
22.4
13.4 0.882 PNP open-collector
PM-F65-P
0.528 transistor
F type
NPN open-collector
PM-F65W
transistor
13 0.512
22.4 PNP open-collector
13.4 0.882 PM-F65W-P
0.528 transistor
NPN open-collector
13.5 0.531 PM-R65
transistor
22.4
13.4 0.882 PNP open-collector
0.528 PM-R65-P
transistor
R type
NPN open-collector
PM-R65W
13 0.512 transistor
Note: “W” in the model No. indicates that the product is mounting-compatible with our conventional models [PM-T53(B) / PM-□64(P)].
8
PM-65
OPTIONS
Connector attached cable
Designation Model No. Description
•• CN-14A(-R)-C□
CN-14A-C1 Length: 1m 3.281 ft
0.2 mm2 4-core cabtyre cable with
Connector CN-14A-C2 Length: 2m 6.562 ft connector on one end
attached cable CN-14A-C3 Length: 3m 9.843 ft Cable outer diameter: ø3.7 mm
ø0.146 in
CN-14A-C5 Length: 5m 16.404 ft
CN-14A-R-C1 Length: 1m 3.281 ft
Connector 0.2 mm2 4-core cabtyre cable with
CN-14A-R-C2 Length: 2m 6.562 ft Connector
attached cable connector on one end
Bending- CN-14A-R-C3 Length: 3m 9.843 ft Cable outer diameter: ø3.7 mm •• CN-14A Contact
resistant cable ø0.146 in
CN-14A-R-C5 Length: 5m 16.404 ft 4
SPECIFICATIONS
Compact / Connector built-in type
Type
Mounting-compatible with conventional model (Note 2)
Model No.
Ambient temperature –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Ambient humidity 5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance Fluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material Enclosure: PBT, Display section: Polycarbonate
Cable length Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 4)
Weight Net weight: 3 g approx., Gross weight: 3 g approx.
Notes: 1) Where measurement conditions have not been specified precisely, the
conditions used were an ambient temperature of +23 °C +73.4 °F.
Recommended connector
2) Mounting-compatible with our conventional models [PM-T53(B) / PM-□64(P)] Contact: SPHD-001T-P0.5, Housing: PAP-04V-S
3) The response frequency is the value when the disc, given in the figure (Manufactured by J.S.T. Mfg. Co., Ltd.)
below, is rotated. Note: Contact the manufacturer for details of the recommended products.
1.8 mm 0.071 in
Disc Recommended crimping tool
Disc
Model No. : YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
t = 0.2 mm 0.008 in
1.6 mm 0.063 in 1.6 mm 0.063 in
(Brown) +V Load
Black (Note)
ZD1 (Black) Output 1 Load
Load + 5 to 24 V DC
Sensor circuit
(Note)
Load + – ±10 %
50 mA max. 5 to 24 V DC White (Note)
T r1 ±10 %
(White) Output 2 (Note) –
ZD2
Tr2 50 mA max. Blue
D (Blue) 0 V
Note: Ensure to insulate the unused output wire.
Internal circuit Users’ circuit
Symbols…D: Reverse supply polarity protection diode Color code Output operation
ZD1, ZD2: Surge absorption zener diode Output 1 Black Light-ON
Tr1, Tr2: NPN output transistor
Output 2 White Dark-ON
1 2 3 4
2 Output 1: Light-ON
3 Output 2: Dark-ON
4 0V
– ±10 %
(Black) Output 1 (Note) + 5 to 24 V DC White (Note)
Tr2 Load
ZD1 50 mA max. – ±10 %
Load Load
(White) Output 2 (Note) Blue
Load
ZD2 (Blue) 0 V
Note: Ensure to insulate the unused output wire.
Internal circuit Users’ circuit
1 2 3 4
2 Output 1: Light-ON
3 Output 2: Dark-ON
4 0V
10
PM-25 PM-45 PM-65
SENSING CHARACTERISTICS (TYPICAL)
2 mm 2 mm
0.079 in 0.079 in
Beam Beam
Light- axis Light- Light- axis Light-
ON ON ON ON
0 1 2 3 4 0 1 2 3 4 0 1 2 3 4 0 1 2 3 4
0.039 0.079 0.118 0.157 0.039 0.079 0.118 0.157 0.039 0.079 0.118 0.157 0.039 0.079 0.118 0.157
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
PM-65 series
Sensing position
Dark- Dark-
ON ON
8.4 mm
0.331 in 7 mm
0.276 in
ℓ
ℓ
2 mm
0.079 in
Beam
Light- axis Light-
ON ON
0 1 2 3 4 0 1 2 3 4
0.039 0.079 0.118 0.157 0.039 0.079 0.118 0.157
Operating point ℓ (mm in) Operating point ℓ (mm in)
PM-45 series
••Never use this product as a sensing device
for personnel protection. ••The following conditions must be observed when using
••In case of using sensing devices for screws to mount the sensor unit.
personnel protection, use products which Screw Spring washer Flat washer Tightening torque
meet laws and standards, such as OSHA, ø6 mm ø0.236 in
ANSI or IEC etc., for personnel protection M3 screw 1 pc. 0.5 N·m
(small round washer)
applicable in each region or country. M3 screws
Spring washer
Mounting Plain washer
Outer diameter
PM-25 series ø6 mm ø0.236 in
< When using M2 screws for mounting > < When using M3 screws for mounting > Screw Spring washer Flat washer Tightening torque
M2 screws M3 screws ø6 mm ø0.236 in
M3 screw 1 pc. 0.5 N·m
(small round washer)
Spring washer Spring washer
M3 screws
Plain washer
Outer diameter Plain washer
ø4.3 mm ø0.169 in Outer diameter
ø6 mm ø0.236 in Spring washer
Plain washer
Outer diameter
ø6 mm ø0.236 in
When using the optional mounting screw set MS-M2, a
spring washer is included.
••In case the PM-25 series is used at an ambient
temperature of +50 °C +122 °F, or more, make sure to
mount it on a metal body.
11
PM-25 PM-45 PM-65
PRECAUTIONS FOR PROPER USE
12
PM-25 PM-45 PM-65
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
1.6
18.7 0.063
0.736 Operation indicator 3.2
(Orange) 0.126
13.4 8
0.528 6 0.315
6 2 0.079 0.236 Operation indicator (Orange)
0.236 13.4
5.5 Beam 0.528 2
Beam size:
12.3 0.217 axis 1.2 × 0.8 0.047 × 0.031 6 0.079 6
8 0.315 0.236 0.236
0.484
5.5 Beam Beam size:
0.217 axis 10 12 1.2 × 0.8 0.047 × 0.031
5 0.197
1.7 0.394 0.472
2-ø3.2 ø0.126 4 0.157
0.067 mounting holes
ø6
ø0.236 2 ø2.5 ø0.098 cable, 1 m 3.281 ft long
ø2.5 ø0.098 cable, 1 m 3.281 ft long 0.079
PM-K25(-P)
PM-L25(-P)
PM-U25(-P) PM-F25(-P)
PM-R25□ Sensor
Beam 6
axis 0.236
Operation indicator
(Orange)
4
0.157
6.7
0.264
11.7
13.4 1.5 Beam size: 0.461
Operation indicator 0.059 1.2 × 0.8 0.047 × 0.031
(Orange) 0.528 6.2 3
6 (2 0.079) R1.6 0.244 0.118
0.236 R0.063
5.5 Beam
0.217 axis 12
8 0.315 0.472 12.5
2 0.079 0.492
5 3.2 ø2
ø0.079
ø2.5 ø0.098 cable, Elongated
1 m 3.281 ft long mounting hole
ø4.8 1.6 0.063 1.95 0.077
ø0.189
PM-R25(-P)
13
PM-25 PM-45 PM-65
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
25.4
1.000 Operation indicator (Orange)
3.5
19 0.138
0.748
7
0.276
Operation indicator (Orange)
2-ø3.2 ø0.126 26 1.024
mounting holes 13.7
19 Beam size: 19 0.748 0.539
Operation indicator 1.2 × 0.8 0.047 × 0.031 2
0.748 6 0.079 13.4
(Orange) 13.4 Beam size: 6 0.236
2 0.528
2-ø3.8 ø0.150 0.528 1.2 × 0.8 0.047 × 0.031 0.236
mounting holes 6 0.079 Beam
0.236 axis 8.4 0.331
17.2 13
Beam 18.1 0.677 0.512 15.2
8.4 0.331 axis 0.713 0.598
17.2 6.2
13.8 0.244 3.2 0.126
21.3 0.677 0.543 Operation indicator
0.839 11 0.433 (R) (Orange) 2.5
5.5 2–elongated 4.3 0.098
0.217 mounting holes 0.169 ø2.5 ø0.098 cable,
1 m 3.281 ft long
ø2.5 ø0.098 cable,
1 m 3.281 ft long
PM-T45
PM-K45
26 1.024 3.5
Operation indicator (Orange) 0.138 7
19 0.748 0.276 2-ø3.5 ø0.138 mounting holes
3.5 0.138 7.5 0.295
10 7 0.276 3.2 0.126 7 0.276
0.394
20.6 6
2–elongated mounting holes 0.811 0.236
4 Operation indicator (Orange)
0.157
ø2.5 ø0.098 cable,
1 m 3.281 ft long
1.5 5 0.197
0.059 ø2.5 ø0.098 cable,
Operation indicator (Orange) 1 m 3.281 ft long
19 0.748
13.4 2 Beam size: 6
2-ø3.2 ø0.126 0.528 13.4 Beam size:
mounting holes 6 0.079 1.2 × 0.8 0.047 × 0.031 0.236 0.528 2 1.2 × 0.8 0.047 × 0.031
0.236 6 0.079
Beam 4.5 0.236
8.4 0.331 9 axis 0.177 Beam
14.6 axis 4.5
0.354 12.6 8.4 0.331 0.177 2.5
0.575 0.496 14.6 12.6
7.2 0.283 0.575 0.098
0.496
2 0.079
2 Operation indicator (Orange)
0.079
PM-L45
13.7 13
0.539 Beam size: 0.512 13
1.2 × 0.8 0.047 × 0.031 Beam size: 13.7
13.4 7 0.512
0.528 2 0.276 1.2 × 0.8 0.047 × 0.031 7 2 Operation indicator
Operation indicator 13.4
6 0.079 6 0.236 0.276 0.079 (Orange)
(Orange) 0.236 6
6 0.236
Beam Beam
8.4 0.331 axis axis 8.4 0.331
9 0.354 17.2 17.2 9 0.354
15.2 21.3 0.677 15.2
0.598 0.677 21.3 0.598
13.6 7 0.839 0.839 7 13.6
0.535 0.276 0.276 0.535
PM-R45
PM-F45
14
PM-25 PM-45 PM-65
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
7 6 7.4 0.291
0.276 0.236 Beam 6.2 3.2 0.126
axis 0.244
13
3.5 0.138 1.6 0.063 0.512
2-ø3.2 ø0.126 mounting holes
4.1
13.4 0.161
0.528 2 6 Beam size: 1.2 × 0.8 0.047 × 0.031
6 0.079 Operation indicator (Orange) 0.236
0.236 Operation indicator (Orange)
Beam 22.4
8.4 0.331 axis 0.882 Operation indicator (Orange)
22.4 13.8 8.4
3.2 0.126 8.3 0.331 2 Beam
0.882 0.543 axis
0.327 0.079
7.4 0.291
3.7 0.146
13.7 13.4
0.539 0.528 7
2–mounting holes
2 0.079 0.276
3.7 0.146 Beam 3
20 0.787 axis 0.118
PM-K65(-P) PM-T65(-P)
PM-T65W(-P)
PM-Y65 PM-Y65-P Sensor PM-F65 PM-F65-P PM-L65(-P) Sensor
7.7 8.3
4.1 0.161 0.303 0.327
7
0.276 Elongated mounting hole
13.5
PM-Y65(-P) 0.531
PM-F65(-P)
15
PM-25 PM-45 PM-65
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
PM-R65(-P)
13.7 L
Operation indicator (Orange) 0.539
35 50
7 1.378 1.969
0.276
8 8
Beam 0.315 0.315
13 axis
0.512
Beam size:
7 1.2 × 0.8 0.047 × 0.031
0.276 2.5 0.098
6.5 0.256 13.4
0.528 ø3.7 ø0.146 cable
6 0.236 Operation indicator (Orange)
(2 0.079) 6
2-ø3.5 ø0.138 0.236
mounting holes Beam •• Length L
axis
9 0.354 Model No. Length L
22.4
0.882
11.4 7 0.276 13.6 CN-14A(-R)-C1 1,000 39.370
0.535
0.449 8.3 0.327
CN-14A(-R)-C2 2,000 78.740
PM-R65W(-P)
Disclaimer
The applications described in the catalog are all intended for examples only. The purchase of our products described in the catalog shall not be regarded as
granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as patent
rights, with respect to such applications, or that the described applications may not infringe any intellectual property rights, such as patent rights, of a third party.
Please contact:
No.CE-PM254565-12 December, 2015 Specifications are subject to change without notice. Printed in Japan