The document provides a job log for lube oil flushing work done by Polytech Maintenance Company at the Saudi Aramco Uthaliyah plant on December 15, 2022. It describes flushing the new lube oil inlet and outlet stainless steel piping of the lube oil system unit M39-077-U-0016. The activities involved filling the line with oil using an air operated diaphragm pump, installing a mesh/screen, circulating the oil at 43.5 psi and 70 degrees Celsius for 30 minutes a total of 4 times, until the mesh was clear, satisfying the client.
The document provides a job log for lube oil flushing work done by Polytech Maintenance Company at the Saudi Aramco Uthaliyah plant on December 15, 2022. It describes flushing the new lube oil inlet and outlet stainless steel piping of the lube oil system unit M39-077-U-0016. The activities involved filling the line with oil using an air operated diaphragm pump, installing a mesh/screen, circulating the oil at 43.5 psi and 70 degrees Celsius for 30 minutes a total of 4 times, until the mesh was clear, satisfying the client.
The document provides a job log for lube oil flushing work done by Polytech Maintenance Company at the Saudi Aramco Uthaliyah plant on December 15, 2022. It describes flushing the new lube oil inlet and outlet stainless steel piping of the lube oil system unit M39-077-U-0016. The activities involved filling the line with oil using an air operated diaphragm pump, installing a mesh/screen, circulating the oil at 43.5 psi and 70 degrees Celsius for 30 minutes a total of 4 times, until the mesh was clear, satisfying the client.
Customer POLYTECH MAINTENANCE COMPANY Location ARAMCO UTHALIYAH
Date 15.12.2022 Job REF #01
number LUBE OIL FLUSHING OF NEW LO INLET Scope of Work & OUTLET SS PIPING AT SAUDI Shift NIGHT SHIFT ARAMCO UTHALIYAH PLANT Unit / Equipment No. Lube Oil System M39-077-U-0016 Supervisor M. JAHEER
ACTIVITIES FOR LUBE OIL FLUSHING
Preparation works continues, with oil filling with Air operated diaphragm pump, then Mesh/Screen installed at the inlet location, after oil filling finished (1230 liters), circulation started with 43.5 psi pressure and stopped with 70 degree C, 43.5 psi pressure, 120 m3, with 30 minutes running, total 4 circulations and at the 4 th circulation we get the clear mesh and clients satisfied with it.
Personnel on Site Equipment Consumables used
Akash Kumar Oil Flushing Pump, SS LUKOIL GEYSER ST 46
Basantha Shreshtra Oil Flushing SS Console w/Immersion MESH (100 micron)
Heater Gopal shreshtra SS Manifold Filter bags Basket Filter SS Oil Flushing hoses and SS Fittings