The document is an anchor chain calibration report for the tug vessel Adam. It details measurements taken on August 16th, 2022 of the original 16mm diameter chain aboard the vessel. Measurements of the internal and external diameters were taken at various points along the chain on the starboard side. The measurements indicate a diminution or wear of between 2.03-2.50%, which is within the allowable 12% diminution threshold. The report was prepared by a QC Inspector, checked by a QA/QC Engineer and documents the inspection of the vessel's anchor chain on the given date.
The document is an anchor chain calibration report for the tug vessel Adam. It details measurements taken on August 16th, 2022 of the original 16mm diameter chain aboard the vessel. Measurements of the internal and external diameters were taken at various points along the chain on the starboard side. The measurements indicate a diminution or wear of between 2.03-2.50%, which is within the allowable 12% diminution threshold. The report was prepared by a QC Inspector, checked by a QA/QC Engineer and documents the inspection of the vessel's anchor chain on the given date.
The document is an anchor chain calibration report for the tug vessel Adam. It details measurements taken on August 16th, 2022 of the original 16mm diameter chain aboard the vessel. Measurements of the internal and external diameters were taken at various points along the chain on the starboard side. The measurements indicate a diminution or wear of between 2.03-2.50%, which is within the allowable 12% diminution threshold. The report was prepared by a QC Inspector, checked by a QA/QC Engineer and documents the inspection of the vessel's anchor chain on the given date.
VESSEL NAME TUG ADAM DATE OF SURVEY: 16/08/2022 JOB NO RE-2022-01135 ORIGINAL DIA 16mm REPORT NO RE-01135/001 D' = (D + d) / 2 Allowable Diminution: 12 % All unit are in mm