You are on page 1of 1

α5:Notes for reboot procedure

The system will be automatically rebooted after install the SOP Disk. However, the system presents the following
phenomenon, please procedure the power switch “off” and “on” again to reboot the system after the following
clause.

Phenomenon:
1. A monitor display becomes dark.
2. A gray scale bar and US image do not display.

Proceed the “Package Software” Reboot the system automatically.


to install the SOP.

The above-mentioned screen is displayed The picture displays after a reboot.


during a reboot procedure. 1. A monitor display becomes extremely
(The above-mentioned screen may not be dark.
displayed) 2. A gray scale bar and US image do
not display.

In addition, this phenomenon is the same when the following procedure.


1. Change the Station Name on the common Preset/DICOM-Store/Send screen.
2. When it returns to a factory setup by “Ctrl” and “R”.

You might also like