Professional Documents
Culture Documents
NTQF Level - I
This learning guide is developed to provide you the necessary information regarding the
following content coverage and topics –
This guide will also assist you to attain the learning outcome stated in the cover page.
Specifically, upon completion of this Learning Guide, you will be able to –
clear work area and set your working area according to specifications and safety
procedures
clean, check, maintain and store tools and equipment in accordance with
manufacturer’s recommendation and standard work practices
Learning Instructions:
2- Read the information written in the “Information Sheets 1”. Try to understand
what are being discussed. Ask your teacher for assistance if you have hard time
understanding them.
4- Ask from your teacher the key to correction (key answers) or you can request
your teacher to correct your work. (You will get the key answer only after you
finished answering the Self-check 1).
Checking Cut Components for Size and Quality of the cut edge
Figure: from right to left pocket making pattern, pocket cutting pattern and pocket
component cut from synthetic leather
After cutting, component should be checked with the cutting pattern for exact size fitting
including allowances as follows.
Learning Guide for Basic Leather Garment and Goods Date: January 2013
Production Operations level I Page 3 of 8
Author: LIDI
Version: 1 Revision: 0
Then the cut component should be checked with the making pattern to get the exact
pocket size via the following steps:
Step 1: mark on cut leather component using the perforations on the cutting pattern
Step 2: lay the making pattern on the marked leather component to check for exact
pocket size as follows
Learning Guide for Basic Leather Garment and Goods Date: January 2013
Production Operations level I Page 4 of 8
Author: LIDI
Version: 1 Revision: 0
The quality of the edge of the cut component can be checked against the pattern edge
as follows.
In conclusion, once the model (the particular product) to be cut with all its specification
has arrived to the cutting department, the cutting person should prepare all the
necessary materials i.e.
Leather, lining, reinforcements and all other materials accordingly including the
color and texture.
Check the components count the number of components that the product
contains.
Identify and prioritize them according to their size and shape
Check how many times they should be cut their position (left/right) and so on.
Learning Guide for Basic Leather Garment and Goods Date: January 2013
Production Operations level I Page 5 of 8
Author: LIDI
Version: 1 Revision: 0
Self-Check 1 Written Test
1.________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
2.________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
Learning Guide for Basic Leather Garment and Goods Date: January 2013
Production Operations level I Page 7 of 8
Author: LIDI
Version: 1 Revision: 0
Addressing faults or irregularities
1. http://www.scoutstuff.org/leather-handbook-cover.html
2. http://www.leatherati.com
Learning Guide for Basic Leather Garment and Goods Date: January 2013
Production Operations level I Page 8 of 8
Author: LIDI
Version: 1 Revision: 0