Professional Documents
Culture Documents
Chemistry Previous Year Question Paper
Chemistry Previous Year Question Paper
*****************
END TERM EXAMINATION
FRST SISTER B. TECE.| DIECEIBER 2016
Paper Code: ETCH-113 Subject: Applled Chemistry |
Time: 3 Hours acium Marks:75
Note: Attempt any fve questions including Q no.1 whlch is compulsory.
Select one question from each unit
Define HCV and GCv. (2.5)
(b) Define order and molecularity of a reaction with suitable example. (2.5
(C What is biodiesel?
(d) State Gibb's phase rule. (2.5)
(2.5)
e what is Piling-Bed-Worth rule?
(2.5)
what is an eutecticmixture?
(g Explain what is (2.5)
happening at the triple point of water. How many phases are
there in the system at
What is synthetic
this pointr. (2.5)
(h) petrol?
() Name the catalyst used for the following (2.5)
(a FischerTropsch process reactions/processc )
(b) Contact Process
c Zeigler Natta Polymerisation
(d) Haber's Process
(e) Homogeneous hydrogenation oipjugaad.com
reaction
UNIT-I
Q2 (a) Differentiate the following
Chemical fuel and nuclear fuel (2.54-10)
() High temperature and low temperature carbonizationa
ii) Ficed and
Fluidized bed
catalytic cracking
(iv) Octane and cetane number
(b) What is sweetening of petrol?
(2.5)
Q3 (a) Explain how the calorific valye of a kuel be deterimined by.
calorimeter with the help of a neat diagran.
can
Bomb's
(b) Calculate GCV and NCV of a gaseous fuel from the
rom calorimeter experiment. following data obtained
Volume of gaseous fuel burnt at STP -
0.08m3
Temperature of inlet water 26°C
Temperature of outlet water 32°C
Weight of water produced by steam Condensation 0.01 kg.
Late heat of steam 587 Kcal/kg (6)
UIT-I
Q4 (a) What is "degree of freedom" of a system? Calculate degrees of freedom of the
folowing systema:
() Water (liquid) > water vapour at 1 atm. (10)
P.T.O.
ETCH-13
R/
UNIT-IM
(a) Describe the principle and theory of EDTA method for determination of
hardness of water. 6.5)
(b) 1g of CacOs was dissolved in dil.HCI and soutiondilite to 1 litre. 50 mi of
this solution required 42 ml of EDTA sohution while 50 ml of sample wateer
required 15 ml of EDTA. On the other hand when 50 ml of boiled water
sample-titrated aganst EDTA consumed 9 ml of soution. Calculate total,
permancnt and temporary hardness of water in ppm. (6)
Explain the following
a Carbonate and phosphate conditioning (6)
(b) Lime soda proces8s (6.5)
UNIT-V
(a) Define the factors affecting the corrosion rate. 6.6)
(b} Explain with reasons- (6)
( Stainless steel is resistant to atmospheric conversion
(ü) Iron in contact with copper corrodes more rapicly than lead
(i) Cr anodes are not used in chromium plating
ETCH-1W3
Plgae wrtts your Exam Rol
No.) eam Rou No **** ***********
Q3
jugaad.com
(a) What is the difference between Petrol, Kerosene oil & diesel oil. How
would you convert Kerosene or Diesel oil to petrol (7.5)
(b) Draw &s explain Boy's Gas Calorimeter. (7.5)
Q4 (a) A solid fuel coal containing 80% carbon, 10% hydrogen, 2% sulphur,
3% nitrogen, 1% oxygen and ash 4%, then calculate the high & low
caloriic valueof that solid fue.
(b) Explain the following terms: (4x-8)
( Cracking
i) Octane number
(iijCetane numberT
(iv)Reforming
Q5 Explain the following: (5x3 15)
a Dry corTOsion
(b) Wet corrosion
(c Ideal& non ideal soution
P
(Please write your Exam Roll
No.
Exam Roll No. .
END TERM EXAMINATIQON
FIRST SEMESTER [B.TECH
Paper Code: ETCH 113 NoVEMBER-DECEMBER 2018
Time : 3 Hours Subject: Applied Chemistry
Note: Maximum Marks :75
Attempt any five questions including Q. No. 1 which is
Select one
question from each unit. compulsory.
Q1.a). What is a fuel? State the features
of a good fuel. (5x5-25)
b} Draw the phase diagram of water.
and triple point. Explain the terms-critical
point
c) What is a
catalyst? Describe its characteristics features.
d) Describe what is water softening by internal treatment.
e) Discuss in detail the factors
influencing corrosion.
2. Unit-
a)What is cracking? Differentiate
crackin8 between thermal & catalytic
b) Explain
Ojucdaa.COT65)
knocking and anti knocking agents. What is cetane and
octane number of afuel?
Q3. a) Draw a Labelled
diagram and explain the working of
by-product oven
for the Otto-Hoffmann's
manufacturing of metallurgical coke. (6.5)
b) The composition by weight of a coal
6%, N=S-1%, sample is C-82% H= 6%, O=
2% and ash=3%. ,
P.T.O.
ETCH-U3
Unit-1I
***********