Professional Documents
Culture Documents
Crochet Crown Project
Crochet Crown Project
CROWN
Nº 04 .19.06
PROJ EC T SHEE T
SHOW US WHAT
YOU’RE MAKING
/spotlightstores
@spotlightstores
CROCHET CROWN Next Round – 1ch, 1dc in same st as sl st, 1dc
in each st to end, sl st in dc at beg.
E ASY Fasten off C4 and join in C5, with a sl st.
Next Round – 1ch, 1dc in same st as sl st, *
WHAT YOU’LL NEED 1dc in next st, miss next 2 sts, 7tr in next st,
• ‘Bella Baby’ Tootgarook Cotton 4 ply 50g miss 2sts, 1dc in each of next 2 sts, rep from
* to end working 1dc in place of 2dc at end,
• tyle A - C1 (Pink) – 1, C2 (Aqua) – 1,
S
sl st in dc at beg.
C3 (Lemon) – 1, C4 (Mint) – 1,
C5 (Pale Pink) - 1 ball Fasten off C5 and join in C2 to first tr, with
a sl st.
• Style B - C1 (Wisteria) – X,
C2 (Watermellon) – 1 C3 (Aqua) – 1, Next Round – 3ch, * 1tr in each of next 3 sts,
C4 (Yellow) – 1, C5 (Mint) - 1 ball 3tr in next st, 1tr in each of next 3 sts, miss
1dc, 1dc in same st as next dc 1 row below,
• A 3.00mm crochet hook or size needed for
rep from * to end, sl st in top of 3ch at beg.
correct tension, scissors, yarn needle, tape
measure. Fasten off C2 and join in C1 to next tr, with
a sl st.
TENSION Next Round – 3ch, 1tr in each of next 4 sts,
12 sts to 5cm over dc, using 3.00mm hook. * 3ch, sl st back into top of tr just worked, 1tr
in each of next 4 sts, 1dc in same st worked
MEASUREMENTS 2 rows below, 1tr in each of next 5 sts, rep
6mths from * to last 5 sts, 1tr in each of last 4 sts,
Size 2 – 3 yrs 4 – 6 yrs
1dc in same st worked 2 rows below, sl st in
– 1yr
top of 3ch at beg.
To Fit Head cm 51 52 53
Fasten off
Height cm 6.5 7.5 8.5
MAKE UP
INSTRUCTIONS: Sew in all ends.
Using 3.00mm hook and C1, make 112 (120- Pin crown out, spray with water and let dry.
128) ch, join with a sl st to form a ring, taking
care not to twist ch.
Round 1 – 1ch, 1dc in each st to end, sl st in
dc at beg.
Rep last round 3 (5-7) times.
Fasten off C1 and join in C2, with a sl st.
Next Round – 1ch, 1dc in same st as sl st,
1ch, * miss next st, 1dc in next st, 1ch, rep
from * to end, sl st in dc at beg.
Fasten off C2 and join in C3, with a sl st.
Next Round – 3ch, 1tr in each st to end, sl st
in top of 3ch at beg.
Fasten off C3 and join in C4, with a sl st.
The information on this project sheet is presented in good faith, but no warranty
is given, nor results guaranteed. Quantities and selections may vary at each store.
Copyright Spotlight 2018.