Professional Documents
Culture Documents
NOTE
1. All our RChip products are RoHS compliant. "LFP" of the internal 2D reel label mentions
"Lead-Free Process"
www.yageo.com
MARKING
PA2512
4 digits
The "m" is used as decimal point; the other 3 digits are significant and the unit is
milliohm
PA2512: 0.5mΩ and 0.75mΩ
Fig. 1 Value = 0.5 mΩ
4 digits
001 The “R” is used as a decimal point; the other 3 digits are significant
PA2512: 1mΩ to 4 mΩ
Fig. 2 Value = 1 mΩ
4 digits
The “R” is used as a decimal point; the other 3 digits are significant
Fig. 3 Value = 5 mΩ PA2512: 5 mΩ to 100 mΩ
CONSTRUCTION
The resistors are constructed using outstanding TCR level material, which makes Yageo P A resistors excellent
for current sensing application in battery charger circuit & DC -DC converter.
The composition of the resistive material is adjusted to give the approximate required resistance and is
covered with a protective coating. Marking is printed on the top side of the resistor.
Finally, the three external terminations (Cu / Ni / matte Tin) are added, as shown in Fig. 4.
Outlines
www.yageo.com
DIMENSION
Table 1 For outlines, please refer to Fig. 4
TYPE RESISTANCE RANGE L (mm) W (mm) H (mm) I1 (mm) I2 (mm)
0.5mΩ ≤ R ≤ 0.75mΩ 6.35±0.25 3.18±0.25 0.63±0.25 2.72±0.25 2.72±0.25
1mΩ ≤ R ≤ 4mΩ 6.35±0.25 3.18±0.25 0.63±0.25 2.21±0.25 2.21±0.25
PA2512
5mΩ ≤ R ≤ 6mΩ 6.35±0.25 3.18±0.25 0.63±0.25 1.19±0.25 1.19±0.25
7mΩ ≤ R ≤ 100mΩ 6.35±0.25 3.18±0.25 0.63±0.25 0.76±0.25 0.76±0.25
Note:
1. For relevant physical dimensions, please refer to construction outlines.
2. Please contact with sales offices, distributors and representatives in your region before ordering.
ELECTRICAL CHARACTERISTICS
Table 2
TEMPERATURE COEFFICIENT
TYPE SIZE POWER RATING TOLERANCE RESISTANCE RANGE
OF RESISTANCE
1W ± 0.5% ± 50ppm/°C
PA 2512 2W ± 1% 0.5mΩ ≤ R ≤ 100mΩ ± 75ppm/°C
Fig. 4 Chip resistor outlines 3W ± 5% ± 100ppm/°C
Note: Please contact with sales offices, distributors and representatives in your region before ordering.
FUNCTIONAL DESCRIPTION
OPERATING TEMPERATURE RANGE
PA2512 Range: –55°C to +170°C
POWER RATING
Standard rated power at 70°C:
For detail power value, please refer to Table 2.
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V = Continuous rated DC or
AC (rms) working voltage (V)
P = Rated power (W)
R = Resistance value (Ω)
www.yageo.com
EMBOSSED TAPE
www.yageo.com
REEL SPECIFICATION
Fig. 7 Reel
HBK039
PA2512 4000 -- 7" (Ø 178 mm) 178.0± 1.0 60.0+1/-0 13.50± 0.5 21.0± 0.8 13.6± 0.5 16.5± 0.5
www.yageo.com
RESISTANCE Unit: mm
SIZE RANGE A B C D
0.5mΩ ≤ R < 1mΩ 7.36 0.50 3.43 3.68
1mΩ ≤ R ≤ 4mΩ 7.37 1.27 3.05 3.68
PA2512
5mΩ ≤ R ≤ 6mΩ 7.40 3.18 2.11 3.68
7mΩ ≤ R ≤ 100mΩ 7.36 4.06 1.65 3.68
www.yageo.com
www.yageo.com
Solderability J-STD-002B test B (a) Method B, aging 4 hours at 155ºC dry Well tinned
- Wetting heat, dipping at 235± 3ºC for 5± 0.5 (>95% covered)
seconds. No visible damage
(b) Method B, steam aging 8 hours,
dipping at 215± 3ºC for 5± 0.5
seconds.
(c) Method D, steam aging 8 hours,
dipping at 260± 3 ºC for 7± 0.5
seconds.
Flammability UL94 Try to inflame a specimen by a needle No ignition of specimen;
flame V-0
Board Flex / AEC-Q200-005 Chips mounted on a 90mm glass epoxy ± (1.0%+0.0005Ω)
Bending resin PCB (FR4), Bending for 2512=2 mm
Holding time: Min.60 seconds
Terminal AEC-Q200-006 Applied a 17.7N (1.8Kg) for 60± 1 ± (1.0%+0.0005Ω)
Strength (SMD) seconds. No visible damage
Flame Retardance AEC-Q200-001 Apply voltage from 9V to 32V to increase No flame,
the surface temp to 350ºC no explosion
Temperature MIL-STD-202 Method 304 At +25/+150ºC Refer to table 2
Coefficient of Formula:
Resistance (T.C.R.)
R 2 R1
T.C.R= x106(ppm/ºC)
R1( t 2 t1)
Where
t1=+25ºC or specified room temperature
t2=+150ºC test temperature
R1=resistance at reference temperature in
ohms
R2=resistance at test temperature in ohms
Flower-of-Sulfur Modified ASTM B809-95 Sulfur 105ºC, 750 hours, unpowered. ± (1.0%+0.0005Ω)
(FOS)
www.yageo.com
REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
TEMPERATURE COEFFICIENT
Version 10
TYPE Jan. 31, 2018 - POWER TOLERANCE RESISTANCE RANGE
- Extend 0.5% Tolerance OF RESISTANCE
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
LEGAL DISCLAIMER
YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any
errors, inaccuracies or incompleteness contained in any product related information, including but not limited
to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or
improvements to product related information at any time and without notice.
YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any
particular purpose or the continuing production of any of its products. To the maximum exten t permitted by
law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii)
any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all
implied warranties, including warranties of fitness for a particular purpose, non -infringement and
merchantability.
YAGEO products are designed for general purpose applications under normal operation and usage conditions.
Please contact YAGEO for the applications listed below which require especially high reliability for the
prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace
equipment (artificial satellite, rocket, etc.), Atomic energy -related equipment, Aviation equipment, Disaster
prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly
public information network equipment, data-processing equipment , Medical devices, Military equipment, Power
generation control equipment, Safety equipment, Traffic signal equipment, Transportation equipment and
Undersea equipment, or for any other application or use in which the failure of YAGEO products could result
in personal injury or death, or serious property damage. P articularly YAGEO Corporation and its affiliates
do not recommend the use of commercial or automotive grade products for high reliability
applications or manned space flight.
Information provided here is intended to indicate product specificati ons only. YAGEO reserves all the rights
for revising this content without further notification, as long as products are unchanged. Any product change
will be announced by PCN.
www.yageo.com