Professional Documents
Culture Documents
GEA31076A
and temperature control used in the power generation and oil & gas industries, has a medium-speed diesel and medium/high-speed gas engines.
legacy of more than 100 years. GE Transportation has been
Optional: exhaust gas silencer
Dimensions Dimensions
A Height 2,550 mm A Height 2,550 mm
D Width 1,850 mm D Width 2,050 mm
common rail diesel engine with lower fuel consumption, high D We support your business through life cycle management of GE Power & Water’s Distributed Power business is a leading
- Stable power output and reliable efficiency in most demanding B B
C
power density and long overhaul intervals. And, the genset can D C
D
your GE engine equipment. GE and its authorized service provid- provider of power equipment, engines and services, focused
ambient condition C
be complemented by high levels of diagnostic and prognostic C C
ers offer a full range of services that increase the availability and on power generation at or near the point of use. Distributed
- Fast and simple installation
service capabilities for customers seeking more reliable and productivity of your plant. Power’s product portfolio includes highly efficient industrial
- Designed for ease of maintenance D D
A
efficient electrical generation capabilities. reciprocating engines and aeroderivative gas turbines that
- Full plant flexibility available with any multiple-engine installation
A
A
E E
F
F F
E
combined and enhanced the proven technology of the Jenbacher G G
employs more than 5,000 people around the world.
J616 gas engine with the P616 locomotive diesel engine from GE
Seitenansicht links/Side View Left
1:8
Vorderansicht/Front View
1:8
D_AAA999 - V
I
System-ID:
ISO 13920
ISO 2768 mK-E
DIN 6930
ISO 9013
CATIA - DRAWING
gez. Tolerierung von Form, Richtung, Ort und Lauf Tolerierungsgrundsatz
drawn TT-MM-20JJ NAME / GRPx
toler. of form, orientation, location and run-out fundamental tolerancing principle
gepr.
check. TT-MM-20JJ NAME / GRPx DIN ISO 1101 Size ISO 14405
CATIA - ZEICHNUNG
designs, or configuration changes or to obtain government or regulatory
approval to do so. If consent is given for reproduction in whole or in part,
this notice and the notice set forth on each page of this document shall
appear in any such reproduction in whole or in part.
Copyright, General Electric Company, 2012
ZGNr.
drawno. J XXXXXXXX XX XX
Prefix Gerät Baugruppe Teilgruppe Identnummer Suffix
prefix type assembly sub-assembly ID number suffix
a) At standard reference conditions per ISO 3046-1:2002E, ISO 8665 and ISO 8528-5:2010
b) At p. f. = 1.0 according to VDE 0530 REM / IEC 34.1 with relative tolerances
c) According to DIN ISO 3046 with a tolerance of +5 %; At 25°C ambient temperature, 1 bar atmospheric pressure; Fuel according to ASTM D-975-S5000 and EN590,
LHV 42700 kJ/kg, density 830 g/l