HK sourcing description Office Transit box size LxWxH 340 x 255 x 200 No. of stacking layer 12 layers (mm) Double Wall Corrugated Box Structure Box flute direction Correct BC - Flute (7mm +/- 2mm) Burst Strength Edge Crush Test 244.62 50.52 (psi) (lbs/inch) Main internal Secondary internal Corrugated board fitment NA protection protection Sealing Method Tape Most fragile areas Product surface finishing Gross weight 9.55 EAN code 5059340017846 (lbs) Safety factor 3 Testing method Apply & release Calculated test Actual test loading 9.55 x (12-1) x 3 x 1.4 = 441.2 442 loading (lbs) (lbs) Photo before test Photo after test
Photos
Remark: No deformation after the test
Test result PASS Test done by Jeff Lee Approved by Ricky Law Vibration Test report Testing Fixed displacement vibration - Testing date June 12, 2023 (1st test) method rotated 90 degree halfway Cycles per Test duration 205/200 35 + 36 = 71 minute in minutes Photos before the test
Photos after the test
Photos
Width of the box can be reduced
It can be reduced by up to 13mm
Total 12pcs/ transit box
Height of the box is fit now
Corrugated board fitment
Built-in corrugated board design
separating 2pcs of feet
The IM is put in a slot
behind the corrugated board separator No product damages found on the samples after the test. Please see the following suggestion:
1) Width of the transit box can be reduced
2) Add round sticker on top opening and bottom closure
Current transit box size: 340 x 255 x 200mm
Suggested box size: 327 x 255 x 200mm (about 4% reduction compared to current Remark packaging)
Important Note: All plastic packaging to contain a minimum 30% recycled content. (GRS or equivalent certification is required)
All paper and board packaging used to be 100% sustainably sourced.
(FSC or PEFC is required)
Test result: PASS
Packaging review from 3 perspective
Test result Sustainability: Satisfactory (if vendor can provide relevant FSC/GRS cert or self declaration letter) Optimization: Fair Protection: Satisfactory Test done by Jeff Lee Approved by Ricky Law
S.No. Product / Material of Test Specific Test Performed Test Method Specification Against Which Tests Are Performed Range of Testing / Limits of Detection