Professional Documents
Culture Documents
POINT DATA VALUES ARE BASIC HOSE 1. TUBE SHALL BE CONSTRAINED STRAIGHT BETWEEN PNT3 AND PNT4 FOR
MEASUREMENT PURPOSES.
X,Y,AND Z POSITIVE AND NEGATIVE VALUES ADHERE
TO THE RIGHT HAND RULE CONVENTION 2. BRAZE SYMBOLS PER AWS A2.4.
P POINT X Y Z RADIUS P
3. FB PER THE FOLLOWING:
a. ASTM E384 HARDNESS OF BRAZEMENT SHALL NOT EXCEED 350 HV 500gf.
PNT1 0 0 -9.5 ---
A b. BRAZING SHALL CONFORM TO AWS B2.2/B2.2M.
PNT2 0 0 -127.5 33 c. BRAZING SHALL CONFORM TO AWS C3.6, CLASS B.
d. BRAZE DISCONTINUITIES SHALL NOT EXCEED ISO 18279
PNT3 38.5 -3.6 -158.2 --- PNT1 QUALITY LEVEL B.
(0,0,0) PNT2
PNT4 406.6 -38.4 -451 --- e. BRAZING FILLER METAL SHALL CONFORM TO
AWS A5.8/A5.8M CLASS BCu1 OR BCu-1a.
PNT5 239.4 -12.6 -557.4 33
5
PNT6 462 -43.6 -495 33
Z PNT3 4. OPERATING FLUID: OIL
O 6 33 O
4 DATA PER INSP.STD.: 16724 AS RECEIVED: (C) 0.75mm
PNT7 579.1 -191.2 -442.4 --- 5.
7
PNT8 621.3 -199.2 -482.3 --- (51.5°) WEIGHT (CLASS 2) 0.0002 mg/mm
2
MAX, SIZE (D) 1 mm MAX, METHOD II
8
PNT9 632.5 -201.3 -492.9 --- PNT3 INTERNAL SURFACE AREA: 62798.4 mm
2
APPROX.
632.5 11. FLEXIBLE HOSE MIN. & MAX. CONTINUOUS OPERATING TEMPERATURE
L RANGE -40 °C TO 130 °C [-40 °F TO 266 °F]. L
SEE NOTE 13
18 5 812. ITEMS NAMED "PIECE" ARE DETAILED WITHIN THE ASSEMBLY.
THERE IS NO SEPARATE DRAWING FOR ITEMS NAMED "PIECE".
913.
19. 2D DATA MATRIX BARCODE SYMBOL AND HRI TEXT PER 18287
492.9
AND AS478 ON SIDE OF TUBE NUT.
MARKING METHOD: 14 (PRESSURE SENSATIVE LABEL) PER AS478
H X BARCODE DESCRIPTION PER 18287 HRI H
YES CUMMINS PART NO. AS SUPPLIED YES
YES SERIAL NO. UNIQUE TO SUPPLIER NO
YES SUPPLIER/VENDOR ID NO
SEE NOTE 19
SEALING SURFACE
PNT 8 SEALING SURFACE PNT6
D D
(11.3°)
VIEW IN DIRECTION OF ARROW B ([1-7/16-12 UN] THREAD) PNT7
PNT8 SEALING FACE
PNT8 SEALING SURFACE
(41 )
ACROSS FLATS
C PNT6,PNT7 C
( 19.8 )
8 10 MIN
B B
LAST DATUM LETTER USED: C LAST REFERENCE LETTER USED: B
Cummins Inc.
DIMENSIONS ARE IN: MILLIMETERS
[ ] ARE IN: INCHES
SIZE:
A0 SCALE:1 R
Associated Specifications
Number Title Type Category Sub-Category
10012 Listing,Approved Source Engineering Specification Administrative Specification Source Control
10059 Characteristics,Classification Of Engineering Specification Administrative Specification General
10903 Substances,Prohibited and Restricted Engineering Specification Administrative Specification Source Control
14465 Air Pressure Decay Leak Testing Engineering Specification Performance Specification Test Method
16061 Flaws,Metallic Items Engineering Specification Inspection Specification Characteristic
16403 Assemblies,Inspection of Weld Engineering Specification Inspection Specification Test Method
16454 Tubes,Metallic Engineering Specification Inspection Specification Item
16663 Flaws,Non-Metallic Items Engineering Specification Inspection Specification Characteristic
16724 Cleanliness,Particle Quantification Engineering Specification Inspection Specification Item
18004 Brazing Engineering Specification Corporate Manufacturing Specification Feature
18095 Items,Fabricated Engineering Specification Corporate Manufacturing Specification Feature
18111 Identification,Prod Item Engineering Specification Corporate Manufacturing Specification Item
18287 Barcode Labeling & Direct Part Marking Engineering Specification Corporate Manufacturing Specification Feature
30046 Steel,Low Carbon Engineering Specification Material Specification Steel, Carbon
74018 Coating,Electrolytic Zinc Engineering Specification Material Specification Surface, Coated
ES10457764 Minimum Inner Diameter Inspection Engineering Specification Inspection Specification Item
Cummins Data Classification: This document (and the information shown thereon) is Part Number: 6503476 Part Revision: 0
Cummins Restricted Confidential and Proprietary and shall not be disclosed to others
in hard copy or electronic form, reproduced by any means, or used Part Name: TUBE,TURBOCHARGER OIL DRAIN
Confidential for any purpose without written consent of Cummins Inc. Drawing Category: Detail (Reside-On) State: Released Sheet 2 of 3
Drawing Revision Information
Description of Change(s)
Note: Change information is provided for reference only and does not supersede the drawing's primary content.
SEE CHANGE NOTICE.
Drawing Authorization
Drafter Caleb John Miller Date 08DEC2023
Checker Robert W Wallace Date 11DEC2023
Approver George Martin Tolhurst Date 13DEC2023