Professional Documents
Culture Documents
Q927225-00-4
QA Order Specification Rev. C
Table of contents
1 Introduction ...................................................................................................................................... 2
Created:
on: 2021-01-05
by: Hartmut Nitsche
Page 1 / 3
The copyright for this document and all appendices is reserved by Loesche GmbH.
File: W:\Dept\Design\Docs\Q-Dokumente\Bestellspezifikation\Q927225-00-4EN_RevC.doc
No. Q927225-00-4
QA Order Specification Rev. C
1 Introduction
Two-component casting resin consists of epoxy resin and hardener.
With this balancing mass the surfaces of the foundation frame and the gearbox baseplate are lev-
elled to ensure the proper alignment between the gearbox and the foundation of the LOESCHE
mill. This additionally reduces vibration and noise.
The cleaner serves to remove oil and grease residue prior to levelling of the surfaces.
2 Minimum requirement
Epoxy resin:
- Compressive strength >130 N/mm2
- Hardening time approx. 24 h at ca. 20° C
Example:
200 l are required as per parts list. Chockfast Orange in 3.4 kg buckets is to be purchased.
200 l x 1.706kg/l = 341kg 341kg / 3.4kg = 100,3, i.e. 100 buckets of 3.4kg each must be
purchased.
Page 2 / 3
The copyright for this document and all appendices is reserved by Loesche GmbH.
File: W:\Dept\Design\Docs\Q-Dokumente\Bestellspezifikation\Q927225-00-4EN_RevC.doc
No. Q927225-00-4
QA Order Specification Rev. C
5 Cleaner quantities
6 Approved products
Page 3 / 3
The copyright for this document and all appendices is reserved by Loesche GmbH.
File: W:\Dept\Design\Docs\Q-Dokumente\Bestellspezifikation\Q927225-00-4EN_RevC.doc