Professional Documents
Culture Documents
2.0 Resources
1. Callister, W. D. and Rethwisch, D. G., Materials science and Engineering: An
introduction, Latest Edition
2. Brown, L. S., and Holme, T. A., Chemistry for Engineering Students, Latest Edition.
3. Serway, Jewett, Wilson and Wilson; Physics Vol 1 and 2; 1st; Cengage Learning,
2013.
4. Halliday & Resnick.,2011,Fundamentals of Physics, 9th Edition, John Wiley& sons
5. Dutt, Prasad & Deo, 2009, Physics Laboratory Manual, SAS.
6. Durka, Frank: Morgan, W: Williams, D.T. (1980). Structural Mechanics (ELBS
Edition), Longman Group Ltd, London
Week 4: Corrosion: Types of corrosion, dry corrosion and wet corrosion, mechanisms of
corrosion, Factors affecting the rate of corrosion.
Week 5: Corrosion: DMC, DAC, stress, inter granular, atmospheric and soil corrosion,
Passivity, Polarization, over potential and its significance.
Physics
Week 7: Measurements & Instrumentation and Error Propagation- Basic Units and
Derived Units, Standards of length, mass & time, Measuring scales.
Week 9: Work, Force, and Torque - Work and Power, Potential- and Kinetic energy,
Conservation of energy.
Week 10: Work, Force, and Torque - Tensile and compressive forces application of
Newton's Laws, Torque.
Week 11: Electricity - Electric Charge and Electric Field Lines, Conductors and Insulators.,
Coulomb's law, Flux, Gauss' Law and Law of Conservation of Charge, Electric Field due to a
point charge.
Electric Field due to a point charge, Electric potential and Electric current, and current
density, Resistance and resistivity (factors affecting resistance), Ohmn's Law (Differentiating
Ohmic and Non-Ohmic conductors).
Week 14: Built Environment -Sound intensity and sound insulation properties: Ventilation:
Condensation, causes and control:
4.0 Assessment
Weight Outline of Assessment This assessment relates to the
Assessment
towards following expected learning
Type
Grade Point outcomes
Assignment 20% This assessment is relevant ULO1, 2
to analysis and problem
solving of corrosion, work,
torque and electricity.
Class Test 20% This assessment covers ULO1, 2
principles of engineering
chemistry and electricity
principles
Laboratories 20% This assessment is relevant ULO 3
to corrosion and
measurements and
instrumentation
Final Exam 40% Overall assessment of the ULO1, 2
unit
Attendance 75 %
(hurdle
requirement)