Professional Documents
Culture Documents
JIS B2011 (황동밸브)
JIS B2011 (황동밸브)
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
Page 39, replace figures of (2)Materials of Attached Table lO(continued)
by the following:
Valve stem rising type Valve stem nonrising type
[Nominal s i z e 65 min.]
U U
UDC 621.646.2:669.35'6
JIS
JAPANESE STANDARD
INDUSTRIAL
by
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
JIS B*ZOLl 9 4 W 4933608 0 5 2 ï ï b 8 942
UDC 621.646.2:669.35'6
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*2OLL 9Y D Y933608 0527769 889
2
B 2011-1994
Table 1. Classification
5K
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
- -
and
Flanged-end angle valve soft _ - 0 0 0 0 0 0 - - -
Flanged-end gate valve Metal - - - - 0 0 0 0 0 0 -
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
JIS B*ZOLL 9 4 4933608 0527770 5T0 =
3
B 2011-1994
5. Qualities
(2) Leakage from valve seat The leakage from valve seat, when t e s t e d i n
accordance with 8.2, s h a l l conform t o Table 3.
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*2033 9 4 H 4933608 0527773 437 =
4
B 2011-1994
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
mm3/s].
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*E!OLL 94 4933608 0527772 373 W
5
B 2011-1994
(4) The c l e a r a n c e between t h e handwheel and t h e gland nut shall have enough
room t o admit of exchanging packings even when t h e valve i s closed.
(6) The passage area i n each p a r t of t h e valve body shall be not smaller
than t h e area of valve seat bore. However, i n t h e case where d i s c
guide i s a t t a c h e d t o t h e valve d i s c , t h e passage area may be deducted
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
by t h e area of d i s c guide.
Tolerances
Nominal s i z e
___
I S t r a i g h t type I Angle type
~
I
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*E!OLL 74 4733608 0527773 20T =
6
B 2011-1994
Unit: mm
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
Nominal s i z e Permissible Value Of
parallelism
A B and r e c t a n g u l a r i t y
15 M 0.83
20 w 0.87
25 (1) 1.o9
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S Bt20LL 9Y Y733608 052777Y LYb
7
B 2011-1994
5.2.4 L i f t check valve and swing check valve The c o n s t r u c t i o n s and shapes
of t h e l i f t check valve and swing check valve s h a l l be as given i n t h e
following:
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*2011 94 4’333608 0527775 082 =
8
B 2011-1994
7. Materials
7.2.1 Valve body, bonnet and valve d i s c The material of t h e valve body,
bonnet and valve d i s c - o f t h e valve of nominal p r e s s u r e 1 0 K s h a l l be BC6 of
J I S H 5111. However, that of t h e bonnet and valve d i s c may a l s o be of
C3771BD o r C3771BE of J I S H 3250.
7.3 D e z i n c i f i c a t i o n r e s i s t a n t material
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
JIS B*20LL 9 4 4933hOe 0527776 TL9 =
9
B 2011-1994
8. Tests
F u r t h e r , f o r the h y d r o s t a t i c p r e s s u r e t e s t , apply t h e t e s t p r e s s u r e of
1.1 t i m e s t h e maximum permissible working p r e s s u r e i n t h e s t e a d y flow a t
12OoC o r under. The test d u r a t i o n shall be i n accordance w i t h Table 7.
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*20LL 9 4 4933bO8 0527777 955 =
10
B 2011-1994
50 ( 2 ) max. 15 15
65 ( 2% ) min. 60 30
Appearance R e s u l t s s h a l l conform t o 6 .
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*2OLL 94 4933b08 0 5 2 7 7 7 8 891
11
B 2011-1994
11. Marking
11.1 Surface of valve body The surface of valve body shall be marked with
the following information.
(2) Arrow mark indicating the direction of flow (excluding the gate valve)
Manufacturer's name or
abbreviation
(1) In the case where the dezincification resistant material was used, the
symbol Z indicating dezincification resistant material.
(2) In the case where the soft seat was used, the symbol of S indicating
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
( 3 ) In the case where the soft seat other than the polytetrafluoroethylene
or polytetrafluoroethylene containing fillers was used, the name of
material and the range in which the valve is capable of being used
(relation between the condition of fluid and the maximum permissible
working pressure or substitute) (excluding the gate valve).
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S 8*2011 94 W Y933608 0 5 2 7 7 7 9 728 W
1.2
B 2011-1994
11.4 Marking of package The package shall be marked with the following
information in a conspicuous place on its surface.
(1) Type
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
Related standards:
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*20LL 94 4933608 052’7780 4 4 T
13
B 2011-1994
Metal seat
k +Dl
S o f t seat
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
I- L
Contraction
( i t may be
Soldered-end t y p e applied t o
t h e v a l v e of
nominal s i z e
25 ( 1 ) and
under. )
Nominal i?
size p”
a
W
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B+2011 94 = 4933b08 0527781 386
14
B 2011-1994
Materials
Metal seat
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
S o f t seat
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*20LL 94 4933608 0 5 2 7 7 8 2 212 -=
15
B 2011-1994
2 Bonnet
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S BV2OLL 9 4 m 4933608 0527783 159 m
16
B 2011-1994
L
Soldered-end tvue I.
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
Unit: mm
c d , 4
n
Nominal designation
o f screw thread %
: U5
5:: %
Y
m u
-ici o
Al B d L I , “ Y U Y
(2) Materials
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
18
B 2011-1994
I
Parts Name of parts
number
Material
++E?-
:I Valve d i s y - To be in accordance with 7.1 or 7.3.1 of the text.
71
~
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*20LL 9 4 4933608 0527786 968
19
B 2011-1994
L
I- Contraction
Soldered-end type ( i t may be
applied t o
t h e v a l v e of
nominal s i z e
25 (i) and
under.
Unit: mm
Nominal
size
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*2OLL ïq m 4’433b08 0 5 2 7 7 8 7 BTL) m
20
B 2011-1994
(2) Materials
Metal seat
N o m i n a i Size
Nominal size
65 (2%) max. 80 ( 3 ) min.
Soft seat
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*20LL 9Y Y933bOô 05277ô8 730
21
B 2011-1994
number
1
I
Parts Name of parts
Valve body
Material
Valve guard
1 C3771BD or C3771BE of J I S H 3250, or BC6 of
J I S H 5111
~ ~ ~~
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
22
B 2011-1994
Metal seat
Nominal s i z e
80 ( 3 ) min.
I- 9D,
s o f t seat
Nominal s i z e Nominal size
65 (2%) max. 8 0 ( 3 ) min.
I
l
Contraction
' ( i t may be
applied t o
t h e v a l v e of
nominal s i z e
,
25 (1) and
under.
Unit: mm
Nominal
H I I D, 1
1
Valve body
size
' Nominal uI<y
designa-
tion of
:5zs
g;;y
screw
thread ""
I
I
8.5 Tr12X3(TW12) 14.5 12 21
8.5 Tr12x3(TW12) 14.5 12 24
15 32 12 105 8 63 3 8.5 Tr12x3(TW12) 14.5 12 29
20 40 R& 14 130 10 80 3 - - 10 Tr14x3(TW14) 16 14 35
25 45 &l 16 145 12 100 3 50 - - 11 Tr16x4(TW16) 18 17 @ 32 32
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
23
B 2011-1994
(2) Materials
Metal seat
Nominal size Nominal size
65 (2%) max. 80 (3) min.
Soft seat
I
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
~ ~ ~~~
24
B 2011-1994
4l
5
Valve guard
Gland ring
C3771BD or C3771BE of JIS H 3250, or BC6 of
J I S H 5111
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
+=I- Valve stem
Handwheel
To be in accordance with 7.2.2 or 7.3.2 of the text.
1:
12
I
1 Hexagon nut
Gland bolt
Hexagon nut
C3604BD or C3604BE of J I S H 3250
SS400 of JIS G 3101
I Identifica-
tion plate
Al050P of JIS H 4000
I nut
C3604BD, C3604BE, C3771BD or C3771BE of JIS H 3250,
or BC6 of JIS H 5111
21 I Seat
C2600P of JIS H 3100, or C3604BD, C3604BE, C3771BD
or C3771BE of JIS H 3250
C3604BD or C3604BE of JIS H 3250
~ ~~~
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
JIS B*ZOLL 9 4 4933b08 0527792 L b L
25
B 2011-1994
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
i
i
e
w I I
k L 4
Soldered-end t y p e
Unit: mm
15 15 55 R& 12 150 - 19 63 3 21 - - 16.03 15.93 12.7 8.5 Tr12X3(TW12) 8" 14.5 12 292626
20 20 65 RX 14 175 - 24 8 0 3 26 - - 22.38 22.28 19.1 10 Tr14X3(TW14) 8" 16 14 35 32 29
25 (1) 25 70 R,1 16 205 - 30 1003.5 32 - - 28.75 28.65 23.1 11 Tr16x4(TW16) 8" 18 17 4438 32
32 (1M 32 80 R,1)4 18 245 - 37 125 3.5 41) - - 35.10 35.00 24.6 13
-
Tr18x4(TW18) 8" 21 20 544.638
41) (1%) 40 90 Rcl% 19 275 - 46 125 4 49 - - 41.48 41.35 27.7 13 Tr18X4(TW18) 8" 21 20 6050 38
50 (2) 50 100 Rc2 21 325 - 57 1404.5 60 ~ - 54.18 54.05 34.0 15 T r 2 0 ~ 4 ( T W 2 0 ) 8" 23 24 7463 41
65 (2%) 65 120 R,2% 24 430260 73 1805.5 77 M12 6 - - - 16 Tr22X5(TW22) 8 26 27 9 0 8 0 4 6
80 (3) 80 141) Rc3 26 490295892006 94 M12 8 - - - 18 Tr24x5(TW24) 8" 28 30 105 90 50
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
26
B 2011-1994
U U
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B X 2 0 1 L 94 W 4933608 0527794 T 3 4
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
27
B 2011-1994
Parts
Name of p a r t s Material
number
2 Bonnet
5 Gland n u t
~~ ~ ~~
10 Gland
18 Gasket
19 Gasket
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*20LL 94 = 4933608 0527795 970 i
28
B 2011-1994
br
- -
O' L
Soldered-end type
al
U
4 H 1 Valve body Width
across flats
47 G SI
threaded O U n P n dri
3-
m r\ Ql Jo U
L l
screw A E; d
d E:
d
r z vGi W
a
d L thread Y *
vE v -+ u
la
12 55 RX 10 35 7 2.5 26 - - - 24 21
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
~
29
B 2011-1994
(2) Materials
soft seat
Metal seat
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
Parts
I
yd " : / :
number
Name of parts
~ 1 Material
lo I nut
C3604BD, C3604BE, C3771BD or C3771BE of JIS H 3250,
or BC6 of JIS H 5111
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
JIS B+2OLL 94 M 4933608 0527797 743 M
30
B 2011-1994
Soldered-end t y p e
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
al
Valve body Width
Nominal u 4 H
-"* '
al au1 . across f l a t s
size la 'Ud - a l
o2 Nominal Length Of $ 4 f f i G ,*z
$
d&l
$
c) designa- threaded !n i-. r\
s1
>
a
+s
0 02 t i o n of portion
ij a
ual
z2
u 0
28
A c
4-
ual
mC
B o
$2 screw W a l
c w
cl
2:
v Ual
gE OE
u 4 w
x c
4
rl
f: u m
o u
A B d L thread I tcF1 Cu4
H
v $
I
d
Cu4
W a l
v u W
2 v
f: v W a l
v
C W
u u
w
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*2011 94 4933608 0527778 b8T
31
B 2011-1994
Metal seat
Soft seat
Parts
Name of parts Materia1
number
1 Valve body To be in accordance with 7.2.1 of the text.
2 Cover
Metal seat
Nominal s i z e
65 max. Nominal s i z e
80 min.
Soft seat.
Nominal size
80 min.
Contract i o n
( i t may be
applied t o
the v a l v e of
nominal s i z e
25 and under.)
T
Unit: mm
Width
Valve stem
Nominal
'ic
thread
15
-
20
25
32
~
40
50
65
-
ao
-
100
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*it20Ll 94 m 4933608 0527800 O b 8 m
33
B 2011-1994
(2) Materials
Metal seat
Soft seat
U
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S Bt20LL 9 4 4933608 0527803 T T 4
34
B 2011-1994
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
Parts
Name of p a r t s Mat e r i a l
numbei
2 Bonnet
6 Gland nut
16 Gasket
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*E!OLL 94 4933608 0527802 930
35
B 2011-1994
t
S o f t seat
&u
Contraction
( i t may be
applied t o
t h e v a l v e of
nominal s i z e
25 and u n d e r . )
Width
BET086
flats
fi
-
d
5:
d
*2
3,.Ja 3,4:
SI
2;
ar Eg
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
wu wu
52 5;
12 23 26
14 29 29
17 32 32
20 35 38
20 41 38
24 50 41
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
~ ~~~~
36
B 2011-1994
Mat eri a l s
Metal seat
Soft seat
I
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
~~
37
B 2011-1994
Parts
N a m e of p a r t s Material
number
2 Bonnet
~~
6 Gland n u t
~ ~~~ ~~ ~~~
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S Ba20LL 9 4 = 4933bOö 0527605 b4T
38
B 2011-1994
Unit: mm
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*ZOLL 94 = 4933608 0527806 58b
~
39
B 2011-1994
Materials
Valve stem rising type Valve stem nonrising type
[Nominal size 65 min.]
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*:2011 94 4933608 0527807 412 9
40
B 2011-1994
Parts
number
I Name of p a r t s
Ik~~,body I Material
To be i n accordance w i t h 7.2.1 of t h e t e x t .
I+- ~~~~~~~~
11
Packing box
~~~~~
Bonnet b o l t
~
BC6 of J I S H 5111
SS400 of J I S G 3101
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
15 Gland b o l t SS400 of J I S G 3101
+ 17
20
Packing
Gasket
Identifica-
tion plate
To be i n accordance w i t h 7.5 of t h e t e x t .
Al050P of J I S H 4000
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
JIS B*20l11 94 W 4933608 0527808 359
41
B 2011-1994
J I S B 0203 Taper p i p e t h r e a d s
J I S B 0253 Gauges f o r t a p e r p i p e t h r e a d s
J I S B 1351 S p l i t p i n s
J I S B 2003 General r u l e s f o r i n s p e c t i o n of v a l v e s
J I S B 2203 Tolerances f o r p i p e f l a n g e s
J I S G 3101 Rolled s t e e l f o r g e n e r a l s t r u c t u r e
J I S G 5501 Grey i r o n c a s t i n g s
J I S H 5111 Bronze c a s t i n g s
J I S H 5301 Zinc a l l o y d i e c a s t i n g s
J I S H 5302 Aluminium a l l o y s d i e c a s t i n g s
J I S K 6889 P o l y t e t r a f l u o r o e t h y l e n e rods
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*2OLL 94 4933608 0527809 295 H
42
B 2011-1994
F u r t h e r , t h e p r o p e r t i e s of t h e s o f t seat shall be s u i t a b l e f o r t h e
type and temperature of t h e f l u i d .
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
2. I n s t a l l a t i o n The i n s t a l l a t i o n of t h e v a l v e s h a l l be made i n accordance
w i t h t h e following:
I n s t a l l t h e valve i n a c o r r e c t p o s i t i o n .
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*20LL 94 4933608 0527830 TO7
43
B 2011-1994
I n a d d i t i o n , i n t h e case of t h e flanged-end t y p e , f a s t e n t h e
b o l t s and n u t s uniformly so as not t o cause uneven f a s t e n i n g .
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
~ ~
44
B 2011-1994
Nominal s i z e
50 (2) 65 (2%) 80 (3) 100 (4)
Type of valve
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B*20LL 94 4933608 0527832 88T W
45
B 2011-1994
(3) C o r r e c t i o n of p i p e ends
( 5 ) Application of f l u x and i n s e r t i o n
(6) Heating
(7 Soldering
(8) Treatment a f t e r s o l d e r i n g
(9) T e s t and i n s p e c t i o n
Remove t h e c u t t i n g c h i p s e n t e r e d i n t o t h e p i p e thoroughly.
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
J I S B * 2 0 1 1 94 = 4733608 0527813 7Lb =
46
B 2011-1994
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
~ ~~~
(9) Test and inspection For the purposes of detecting missoldering and
leakage on the soldered portions, confirmation shall be made by v i s u a l
inspection and f e e l i n g with hands.
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at
JI'S B*ZOLL 94 4933608 0527835 599
--`,,`,`,`,`````,,,`````,,```,,-`-`,,`,,`,`,,`---
B 2011-1994
Edition 1
Japanese Text
Established by Minister of International Trade and Industry
Printed in Tokyo by
Hohbunsha Co., Ltd.
COPYRIGHT 2003; Japanese Standards Association Document provided by IHS Licensee=research isntitute of sci & tech -
Korea/5922932100, User=, 01/29/2003 00:07:43 MST Questions or comments about
this message: please call the Document Policy Management Group at