Professional Documents
Culture Documents
Version 5.01
Phone: +45 36 77 88 00
Web::
Tel: www.iac-nordic.dk
+45 36 78 54 98
E-mail:: nordic@iac-nordic.dk 1
Web: http://www.iac-acoustics.com/dk/
Email: nordic@iac-nordic.dk
www.iac-nordic.dk
TABLE OF CONTENTS
4. VIKAFOAM
F L OOR
Reduction of noise with floating floors in
buildings and production halls.
6. VIKACELL
Ideal for floating floors when vibration
reduction requirements are high.
8. JACK UP
VIKAS Jack Up System FZH is used
in sound studios, office environments
and in production halls.
9. STEEL FLOOR
Low-profile steel floor on vibration
dampers for best sound isolation
WALL
Phone: +45 36 77 88 00
2 Web: www.iac-nordic.dk
E-mail: nordic@iac-nordic.dk
2
www.iac-nordic.dk
Introduction
Floating floors are designed to reduce the effects of noise or elastically supported walls can be excellent
and vibration and thus increase the level of comfort in rooms self-contained solutions for sound insulation. Elastic ceiling
adjacent to noisy or vibration-generating activities such as hangers and wall mounts are used for this purpose.
fitness centres, bowling alleys, restaurants, cafés, nightclubs
and industrial halls. In order to achieve an optimum degree of insulation, the
nature of the influences at play and the requirements
Floating floors are also suitable for areas that require a that need to be met are taken into consideration in each
low level of background noise such as recording studios, individual case.
cinemas, concert halls, anechoic chambers, rooms for taking
precision measurements and in buildings that have both The principle behind IAC floating floors provides a high level
office space and industrial production. of acoustic insulation compared with other types of floor
constructions.
A floating floor system consists of a floor with two layers
separated by a layer of elastic material. This intermediate The R'w specification for airborne sound insulation and
layer insulates the floor from the substrate providing the L'n,w specification for step noise levels are weighted
acoustic insulation as well as insulating against noisy values, where low-frequency noise is weighted very low.
footsteps. Sound-absorbing materials in the cavity further This means that these specifications are not descriptive in
increase the soundproofing level. situations with loud, modern music with a lot of bass notes.
The advantages of a floating floor at these low frequencies
A floating floor can be a part of a room in a whole-room can be substantially greater than the weighted standard
solution, combined with wall mounts and ceiling hangers. specifications suggest. This can be a very important
In situations with little flanking transmission, elastically consideration since bass notes can easily travel over long
suspended ceilings distances in buildings.
Phone: +45 36 77 88 00
Web: www.iac-nordic.dk 3
E-mail: nordic@iac-nordic.dk
www.iac-nordic.dk
Product description
Application
Attenuation
Fire performance
Project Photos
Phone: +45 36 77 88 00
4 Web: www.iac-nordic.dk
E-mail: nordic@iac-nordic.dk
4
www.iac-nordic.dk
0.020
50 mm
mm
VF 16
37.5 m
25 m
12.5
Load [N/mm²]
0.015
Dynamic Load
0.1
Load [N/mm²]
VF 16
VF 10
0.010
VF 10
Static load
0.01
0.005
VF VF VF VF VF VF VF VF VF VF VF VF VF 0.000
10 16 26 40 65 110 170 260 400 650 950 1300 1900
5 10 15 20 25 30
0,001
VIKAFOAM types Natural Frequency [Hz]
0.35
Natural frequency of a single-degree-of-
37.5 mm
50 mm
25 mm
m
12.5 m
VF 260
VF 260
VF 170
0.20
Form factor q = 3
VF 110 VF 170
VF 110
0.15
0.10
Dynamic load
Static load
0.05
0.00
5 10 15 20 25 30
3.5
Natural frequency of a single-degree-of-
50 mm
mm
mm
25 m
12.5
3.0
and an elastic bearing consisting of
VIKAFOAM VF 1900 on a stiff subgrade.
2.5
Load [N/mm²]
VF 1900
2.0
Form factor q = 1,25
VF 1900
1.5
1.0
Dynamic load
Static load
0.5
0.0
5 10 15 20 25 30
Phone: +45 36 77 88 00
Web: www.iac-nordic.dk 5
E-mail: nordic@iac-nordic.dk
www.iac-nordic.dk
VIKACELL is a microcellular elastomer that is especially VIKACELL can be dimensioned for a dynamic natural
flexible and can tolerate up to 75% - 80% compression frequency of 8 Hz at a height of only 30 mm, which is less
without damage to the material. than half the height that other materials need to achieve the
same natural frequency.
Application
Installation
We typically use VIKACELL 400 for floating floors where
acoustic insulation requirements are high. The material can VIKACELL is typically used as blocks that are customized
also be used to set up machinery on a floating foundation for the bearing capacity and requirements for insulation
and also for general placement of machinery. The material efficiency.
was developed for the automotive industry where it is used Normal maximal static load 0.45 N/mm².
as an absorber in the suspension system, so it can handle
long-duration dynamic loading.
Attenuation
NOTES:
1. VIKACELL Pad
2. VIKACELL and Plywood pad are glued
3. Plywoodplate and Plywood pad are screwet together
4. The Plastic foil is to cover the entire area and is overlapped and taped
5. Perimeter isolation can be Neoprene Cellular rubber used against all building struct
Amager Slope
Phone: +45 36 77 88 00
6 Web: www.iac-nordic.dk
E-mail: nordic@iac-nordic.dk
6
www.iac-nordic.dk
14
12
10
6
0,00 0,05 0,10 0,15 0,20 0,25 0,30 0,35 0,40 0,45 0,50 [N/mm²]
Compression [%] 4 6 9 14 19 25 30
60
50
40
30
20
10
0
1 10 100 1000 10000 100000
Time [Hours]
Phone: +45 36 77 88 00
Web: www.iac-nordic.dk 7
E-mail: nordic@iac-nordic.dk
www.iac-nordic.dk
FZH Jack Up System for concrete floors is used in recording Usage is about 1.12 attenuators per m², which varies slightly
studios, office environments and in production halls. There in relation to the thickness of the concrete and the amount
may also be other locations where you want to reduce the of reinforcement.
disturbance from noisy footsteps or other structure-borne
noise from entering a room. The system also works in the Advantages
other direction, so that noisy footsteps or the sound of a
drum set inside a studio is optimally deadened in the rest of The system's clear advantage is that it ensures that there is
the building. no interference, because when the floor is raised, there is no
contact with the sub-floor.
Application
20
Phone: +45 36 77 88 00
8 Web: www.iac-nordic.dk
E-mail: nordic@iac-nordic.dk
8
www.iac-nordic.dk
Product description
Application
Low profile Steel Floor, constructed of two 6 mm thick
steel plates separated by Neoprene rubber, which rests on The total floor structure is 50 mm high and the resonant
either VIKAFOAM or VIKACELL vibration absorbers. These frequency for vibrations in the room is less than 11 Hz.
ensure effective vibration insulation against noise from the Attenuation at 60 Hz is at least 30 dB and at 120 Hz it
building's concrete floors. Noise from the building's concrete is more than 45 dB. The floor height can be increased to
floor can originate from vibrations caused by noisy footsteps achieve a lower resonant frequency.
or machines located in other parts of the building. Noise
can also come from nearby train or subway lines, and from The relatively low installation height of the floor makes it
nearby roads with heavy traffic. easier to accommodate access for wheelchair users and
it can be incorporated in most rooms while keeping a
The floating steel floor prevents airborne and structure- comfortable ceiling height.
borne noise from entering the room.
3591 4298
25mm Rockwool
Phone: +45 36 77 88 00
Web: www.iac-nordic.dk 9
E-mail: nordic@iac-nordic.dk
www.iac-nordic.dk
Product description
Application
A sound-insulating staggered wall reduces airborne Approx. 1.4 ceiling hangers per m² of ceiling with 2 layers of
transmitted noise by 8-12 dB, depending on the plasterboard (~Load: approx. 18 kg/hanger).
existing wall construction.
Approx. 1.5 ceiling hangers per m² of ceiling with 3 layers of
Advantages plasterboard (~Load: approx. 23 kg/hanger).
• The ceiling hanger and wall mount insulate optimally Approx. 4.5 wall mounts per linear meter of wall (ceiling
against airborne noise. height 2.5 – 3.1m).
• Fireproof construction. Cladding class 1 (DS 1065.2)
• Easy to install and can cover up irregularities in the Note
existing ceiling and wall
Dimension X can be between 65 and 1200mm
4
6.
Ø
30
X
X
10
10
68
60 70 114.5
155
60mm Hanger for 70mm Hanger for
CD 60/27 profiles MR 70 profiles
Phone: +45 36 77 88 00
10 Web: www.iac-nordic.dk
E-mail: nordic@iac-nordic.dk
10
www.iac-nordic.dk
General
The fittings are delivered unassembled and consist of the It is also important to include the following in the design:
following components:
All joints must be soundproof at walls and penetrations.
Ceiling hangers: 1 Ceiling brace, vibration absorber incl. 2 Joints are sealed with an elastic sealant.
screws and strap with a length from 65 - 1200mm Light fixtures and the like, which penetrate the ceiling, need
to be fitted with a soundproof superstructure.
Wall mounts: 1 wall brace, 2 vibration absorbers incl. If heavier items are suspended from the ceiling, additional
1 screw, 1 set-screw and strap with a length from 65 - ceiling hangers need to be installed to accommodate the
1200mm increased load.
(Each hanger can have a max. load of 28 kg.)
UD 28/27 If a staggered wall will bear an additional load from heavier
MSK 45
m
items, etc., additional wall mounts should be installed.
0m
160 mm
0
ard 50
bo rd 1
ster boa
pla er
rs last
Laye rs p
2 aye Rail CD 60/27 or MR 70
3L Vikas Ceiling hang
ger
Mineral Wool
45 Min 50mm
0m
m
1200 mm
m
0m
45 Ca. 200-300mm
2- 3 llayers
2
UD 28/27 for CD60/27 + 3mm RR Plaster Board
MSK 45P fo
for M
MR 70 + 3mm RR i
min
65 mm
Vikas elastic sealan
nt
Phone: +45 36 77 88 00
Web: www.iac-nordic.dk 11
E-mail: nordic@iac-nordic.dk
www.iac-nordic.dk
Product description
The wall fitting is quick and easy to install and can be used
Sound-insulation wall mount. The fittings are electro- with various types of steel profiles.
galvanised steel with vibration insulators of thermoplastic
elastomer. Installation
Application The wall can be erected on VVB (3 mm thick wall tape, p 13)
Wall mounts are used for fastening sound-insulating without a fixed connection to the existing walls, ceilings and
staggered walls. The fitting is not designed to bear the pipe penetrations, etc.
wall but to support it. They are designed to work for both
compression and tension: During installation, joints between the acoustic ceiling and
Compression: under varying loads up to 40 kg. wall, pipes, wires, etc. are sealed with an elastic sealant
Tension: under varying loads up to 30 kg. (acoustic sealant).
Mechanically fireproof
Usage
Attenuation Approx. 6 wall mounts per linear meter of wall
at a ceiling height of 2.4 – 3.2 m
A sound-insulating staggered wall reduces air-transmitted
noise by 8-12 dB depending on the existing wall
construction.
Advantages
15
13
Tension Load
Snit B - B
1,5
13 11
27 120
9
20 20 R8 Compression Load
5
B B 0 5 10 15 20 25 30 35 40
Load [kg]
60
Ø 6,5
160
50
80
Phone: +45 36 77 88 00
12 Web: www.iac-nordic.dk
E-mail: nordic@iac-nordic.dk
12
www.iac-nordic.dk
Wall tape RR
Product description
Application
Fire performance
• Thickness 3 mm
200
• Width 50 mm
• Roll length 20 m
• Dynamic stiffness per linear meter 3500 N/mm
150
• Typical bottom rail MSK 45
100
50
0
0 0,3 0,6
Deflection [mm]
0
0 12 24 36 48 60
250 Kg Time (Month)
Load
100 Kg
Phone: +45 36 77 88 00
Web: www.iac-nordic.dk 13
E-mail: nordic@iac-nordic.dk
www.iac-nordic.dk
Sound-insulating click bracket for suspended plaster ceilings. Installation with the click system is quick and easy. Mount
The fittings are electro-galvanised steel with vibration the brackets at the correct height on the threaded rods and
insulators of thermoplastic elastomer. click the profiles in place. Push the safety device into place
with your finger, and the ceiling is finished.
Click brackets come in two types: The sound ceiling should hang freely without direct contact
GREEN for loads between 10 kg and 32 kg. with the other walls, ceiling, pipe penetrations, etc.
BLUE for loads between 22 kg and 57 kg.
Usage
Click brackets are available for M6 and M8 threaded rods
Safety device withstands pressures exceeding 326 kg. The The decisive factor for choosing the type and number of
service life is 30 years. EN 13964-2006. ceiling brackets will often be the deflection of the 60/27
profiles. So the choice will often go to the green type.
Application
Section B-B
Phone: +45 36 77 88 00
14 Web: www.iac-nordic.dk
E-mail: nordic@iac-nordic.dk
14
www.iac-nordic.dk
Application
Measured Natural Frequency [Hz]
Ceiling hangers are used for sound insulation in connection 15
with suspended flat plaster ceilings. The hangers are
designed to bear the gypsum ceiling and make it vibration- 13
proof from the existing ceiling. It is suitable for loads
between 3 kg and 76 kg. 11
Attenuation 9
61
95
103
94
M6&M8
Phone: +45 36 77 88 00
Web: www.iac-nordic.dk 15
E-mail: nordic@iac-nordic.dk
www.iac-nordic.dk
IAC Acoustics
Jernholmen 44
DK-2650 Hvidovre
Phone: +45 36 77 88 00
www.iac-nordic.dk
nordic@iac-nordic.dk
Office hours
Monday - Thursday 8-16
Friday 8-15
Phone: +45 36 77 88 00
16 Web: www.iac-nordic.dk
E-mail: nordic@iac-nordic.dk
16