Professional Documents
Culture Documents
There are various designs with different operating frequencies, dimensions, and gains
to choose from in order to meet different requirements and applications. The L
band patch antenna is specially designed to receive L-band satellites like GPS,
Iridium patch antenna, Inmarsat, and other types of satellites that offer transmission
between 1525 – 1660 MHz.
The L-band patch antenna is a type of antenna specially built for several GNSS bands.
Also, it is suitable for Inmarsat and Iridium telecom applications. Also, this patch
antenna is made up of metal and strictly designed for low-cost, robust applications. It
is suitable for use in high-power applications. The removal of substrate loss has
allowed the provision of high antenna radiating efficiency.
L band patch antenna comes with a lot of excellent features which include:
There are various designs with different operating frequencies, dimensions, and gains
to choose from in order to meet different requirements and applications. The L band
patch antenna is specially designed to receive L-band satellites like GPS, Iridium
patch antenna, Inmarsat, and other types of satellites that offer transmission between
1525 – 1660 MHz.
It is important to know that the L band patch antenna is not ideal for weak signals that
need a dish such as GOES. The L band patch antenna features a set with a large
suction cup. Also, it features bendable tripod and 3M RG174 extension cable which
helps in installing. This antenna comes in a weather proof enclosure. Receiving l band
satellites
L-band is simply a defined frequency range from 1 GHz to about 2GHz in the radio
spectrum. Also, the L band is widely integrated for satellite communications, Global
Positioning System (GPS), Radars, Telecommunication, and Aircraft
surveillance. This band features a very small bandwidth since it ranges from 1 to 2
GHz and as such, L-band is commonly integrated in fleet management and tracking
systems.
Due to the low profile, wide applications, and easy fabrication of patch antennas,
these antennas have become very popular in space crafts, aircraft, and satellite
communications. Even in wireless communication, there is an increase in protocols
you need to fully integrate in a single device. Also, you can easily achieve this by
integrating single-band antennas for every required application. Also, you can
integrate a multiband antenna which has similar structure and size of a single band.
Furthermore, multiband antennas are ideal for use in devices that need to cater for
some protocols. Also, multiband antennas require to use expensive filters to help
suppress unwanted signals. Therefore, this increases the cost.
A patch antenna is a usually an antenna that has a low profile. This antenna can be
installed on a surface. Also, it comprises any geometrical sheet or “patch” of metal,
attached over a ground plane. This ground plane is very big piece of metal. Also, a
patch antenna is a type of microstrip antenna. The two metal sheets when combined
create a piece of microstrip transmission line with about one-half wavelength of the
radio waves.
Furthermore, the radiation mechanism comes out from fringing fields. There is a
radiation at the edges. This radiation makes the antenna to function a bit larger than its
physical dimensions. Therefore, you can make the antenna resonant. To achieve this,
the microstrip transmission line’s length must be a bit shorter than one-half the
wavelength at the frequency.
Communication
travel long distances and pass through several obstacles they find, like mountains and
buildings. However, it is important to understand that higher the frequency results in
shorter the wavelength. Therefore, it will be much easier to prevent the traffic of the
waves.
There is another crucial situation we need to look into. This is regarding when there
are high frequencies, even more than tens of gigahertz. You can imagine that the
objects we consider small and simple like raindrops or leaves can stop the waves.
Therefore, this results in a well-known phenomenon known as “rain fade.” You can
overcome this phenomenon which by applying more power.
Most times, we only discuss the advantages offered by high frequencies such as the
Ka Band and Ku Band. Ku and Ka Band have great features. These bands enable
transmitters to give out more data per second. The main problem with such high
frequencies is that they may carry more information, however they are in need of
more power to prevent any blockages. Furthermore, this and bigger antennas
indicate that there is a great need to acquire more equipment.
There is a solution to this problem. The L Band offers great benefits in satellite
communication. These include offering much more stable global operations. It does
this even when there are adverse weather conditions in complicated areas. Also,
another benefit of this band is that it offers a global network coverage without any
form of interruptions. Therefore, this allows mobile users to have access to broadband
communications anywhere around the world.
The L-band antennas are one of the most used frequency range in various satellites
worldwide. Also, the antenna offers the advantage of being lightweight. Therefore,
the L band satellites are primarily utilized for mobile and tactical operation. Other of
its applications, are given in different systems, which includes search and rescue
operations. For example, the SARSAT/COSPAS, Russians and Americans used some
meteorological satellites. This band is suitable for the downlinks available in satellites
having high resolution.
The L band satellites function in frequencies that from 1,530 to 2.7 Ghz. It is one of
the satellites bands that has the lowest frequency. Since the L band has the lowest
frequency it is commonly used in the market. One of its benefits includes a longer
wavelength. Due to this, external factors such as rain don’t affect this band. If at all
such happen does, normally integrated by the Ka and Ku frequency bands.
Building an L band setup is the fastest and most efficient way to start with satcom
ACARS. Also, the L-Band is usually around 1.5GHz. There is a broad
signal footprint from each Inmarsat. Therefore, you don’t need antenna tracking. All
you need to do is to point it at the satellite orbit’s middle. Then, you can receive the
signal and as well decode ACARS messages.
One of the most crucial things you need to understand about how L-Band operates is
that you will need to pick up the ACARS messages from ground support staff to the
aircraft. Most times, L-band is described as land while C band is cockpit.
The RTL-SDR v2 patch antenna is the most popular option people settle for when
buying an L band. Other alternatives are usually smaller antennas and this is not
recommended. This is because small size antennas offer low performance and this
means very low signal. Some people have tried out the modified GPS antennas. These
antennas are too small and can’t be of real value. In fact, avoid any of the small sized
patch antennas regardless of how attractive the price is. Small sized patch antennas
are often available at a much lower price.
The V2 antenna is a great option worth considering. If you only want to listen to voice
calls, then the V2 patch antenna is a great choice. You need more gain for consistent
decodes of the audio. One fact is that an antenna is more directional if it has more
gain. The V2 antenna is a quality item that offers good properties.
Sometimes, your active L-Band antenna might have so much gain. In this case, the
satellite orbit may take your antenna off your sweet spot. All you will have to do is to
move every time you need to decode some voice messages.
Conclusion
Due to the low profile, wide applications, and easy fabrication of patch antennas,
these antennas have become very popular in space crafts, aircraft, and satellite
communications. Even in wireless communication, there is an increase in protocols
you need to fully integrate in a single device.
Related Posts:
https://www.raypcb.com/l-band-patch-antennas/