You are on page 1of 2

service information

Date: November/96 Distribution: II Substitues: Gr.: 07 Nr.: 04/96

Joints of the acceleration system, in the engine


Engines of series 447 and 449 (Buses, Platforms and Chassis for Buses)

The above mentioned engines, as per the following indications, receive now the application of grease points in
the joint bearings of the acceleration system, installed in the engine, as follows:
• one grease point (45˚), apllied in the bearing installed on flywheel housing;
• one grease point (straight), applied in the bearing installed on flywheel housing lateral side.

The introduced modification has the purpose of making possible a more efficient periodical lubrication.

INVOLVED PARTS
Part Nº - Previous Part Nº - Present Denomination
475 070 02 19 Bearing (on flywheel housing)
-//- 071412 010300 Grease point C M10x1 (45˚)
475 070 70 19 Bearing (on flywheel housing lateral side)
-//- 071412 010100 Grease point A M10x1 (straight)

APPLICATION ON SERIES
Engine construction Nº As of engine final nº Type Vehicle
OM 449 A/LA O 400 R/UP
475.9...
OM 449 LA OHL
...698725
O 400 RS/RSD/RSL
476.9... OM 447 LA
OHL

NOTES:
• In case an eventual intervention in the referred joints is necessary, we recommend the application of the bear-
ings with grease point which are being presented now.
• The joints lubrication must be carried out within the intervals prescribed in the Maintenance Schedule, in ac-
cordance with the Service Category in which the vehicle is placed.

MERCEDES-BENZ DO BRASIL S.A.


Service

MERCEDES-BENZ DO BRASIL S.A. REPRODUCTION OR TRANSLATION IN WHOLE


GERÊNCIA DE ASSISTÊNCIA TÉCNICA OR IN PARTS IS NOT PERMITTED WITHOUT
WRITTEN AUTHORIZATION

You might also like