You are on page 1of 1

EZ-Huber insertion into Port-A-Cath for the ANTT Practice Framework see: www.antt.

org
using Surgical-ANTT

Patients zone
Preparation zone

1 2 3 4 5 6

Patient zone
Clean hands Clean trolley Gather dressing Apply apron Open Critical Clean hands & apply
with alcohol hand rub according to pack & equipment, & clean hands Aseptic Field & sterile gloves using
or soap & water local policy place on bottom shelf equipment using NTT closed gloved technique

7 8 9 10 11 12

Prime EZ-Huber Disinfect skin Stabilise Port-A- Insert EZ-Huber Confirm correct Flush EZ-Huber
device with 0.9% for 30 sec - 2% chlorhexidine Cath with non- device aiming for centre of placement with as per local policy
/70% alcohol applicator & a cross Port-A-Cath at a 90-degree 'flashback' of blood
NaCl using NTT hatch technique. Allow to dry
dominant hand angle in extension tubing

Decontamination zone
13 14 15 16 17 18

Apply dressing Dispose of sharps Dispose of gloves Clean hands Clean trolley Clean hands
as per local policy & equipment and then apron Immediately after according to with alcohol hand rub
glove removal local policy or soap & water

V1.0 Designed with Alder Hey Children’s NHS Trust - Vascular Access Service

You might also like