You are on page 1of 1

GENERAL NOTES:-

All dimensions are in meters and levels in meters unless


otherwise noted.
Typical details shall be read in conjunction with the
appropriate architectural/civil and service drawings.
The drawings shall not be scaled. Only written dimensions
shall be used.
The contractor is deemed to have check about the
exactness of all dimensions and grid lines and should
report immediately in writing to the architect by any
discrepancies before the commencement of any work.
The contractor will be responsible for all setting out.
The contractor is deemed to have checked the design.
The contractor is to provide shop drawings of all systems for
approval by the consultant before commencing any
work.
The contractor shall confirm the line out of the design prior to
the commencement of work.

AL-AHSA WAREHOUSE

You might also like