Professional Documents
Culture Documents
Sample Electrical Drawings
Sample Electrical Drawings
REVISIONS
NO. INITIAL REVISIONS DATE
LIGHTING LAYOUT
SCALE:
DRAWING No.:
DATE:
DRAWN: E-02
CHECKED:
NOTES
1 The Electrical Contractor shall:
primary dimensions are in millimeters and should be
cross checked by the contractor before and during
1 Verify all dimensions on site and fit out of his work
the works all secondary dimensions are in feet &
within the building.
inches and are to be used only for reference, they
are not to be used for construction.
2 Coordinate with the other subcontractors on the final
location of fittings, fixtures etc. to ensure there are
2 no obstructions with other trades.
do not scale from these drawings. any errors,
discrepancies or omissions should be clarified with
the architect.
3 Identify and mark out all wall, beam or floor slab
penetrations to be cut or left out by the main
3 contractor.
all drawings & copies thereof are property of the
architect and should be returned to same on the
4 Referring to architectural and structural drawings for
completion of the works. these drawings may not be
confirmation of all on-site dimensions.
reproduced without expressed written permission of
the architect
5 Arrange and pay for all inspections and tests from
the Electrical Inspectorate and upon satisfactory
4 completion supply all relevant certificates.
see engineers drawings for all structural details.
REVISIONS
NO. INITIAL REVISIONS DATE
POWER
&
CUMMNNICATION LAYOUT
SCALE:
DRAWING No.:
DATE:
DRAWN: E-03
CHECKED:
NOTES
1 The Electrical Contractor shall:
primary dimensions are in millimeters and should be
cross checked by the contractor before and during
1 Verify all dimensions on site and fit out of his work
the works all secondary dimensions are in feet &
within the building.
inches and are to be used only for reference, they
are not to be used for construction.
2 Coordinate with the other subcontractors on the final
location of fittings, fixtures etc. to ensure there are
2 no obstructions with other trades.
do not scale from these drawings. any errors,
discrepancies or omissions should be clarified with
the architect.
3 Identify and mark out all wall, beam or floor slab
penetrations to be cut or left out by the main
3 contractor.
all drawings & copies thereof are property of the
architect and should be returned to same on the
4 Referring to architectural and structural drawings for
completion of the works. these drawings may not be
confirmation of all on-site dimensions.
reproduced without expressed written permission of
the architect
5 Arrange and pay for all inspections and tests from
the Electrical Inspectorate and upon satisfactory
4 completion supply all relevant certificates.
see engineers drawings for all structural details.
REVISIONS
NO. INITIAL REVISIONS DATE
ELECTRICAL SCHEMATIC
&
PANEL SCHEDULES
SCALE:
DRAWING No.:
DATE:
DRAWN: E-04
CHECKED: