Professional Documents
Culture Documents
Contents
Disclaimer
The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any
errors that may appear in this document. In case of discrepancies between the English and any other language version, the wording of the English version shall
prevail.
© Copyright 2022 ABB.
All rights reserved.
Trademarks
ABB is a registered trademark of the ABB Group. All other brand or product names mentioned in this document may be trademarks or registered trademarks of their
respective holders.
2 ABB
Protection and Control IED Manager 1MRS756448 T
PCM600
Product version: 2.12 Issued: 2022-11-30
Revision: T
GUID-BC9474F6-E579-4326-99E8-433B8A3FEB99 V4 EN-US
ABB 3
Protection and Control IED Manager 1MRS756448 T
PCM600
Product version: 2.12
GUID-62510AC1-D402-425C-A00D-FD0B97138922 V3 EN-US
GUID-A565A681-95ED-4CEC-B721-DD119BEBE400 V3 EN-US
GUID-F80A10F3-CA4E-4F35-AA32-D01E531CD3DC V2 EN-US
4 ABB
Protection and Control IED Manager 1MRS756448 T
PCM600
Product version: 2.12
5. Signal matrix
The graphical signal matrix of PCM600 allows connecting
efficiently CTs, VTs, binary input and output signals to the
configuration. The configuration can also be changed from
here. The tool can also be used for connecting the LEDs on
the IED as well as for connection of the GOOSE signals
between the IEDs.
GUID-3248B496-F627-44AD-9261-ABB812508CAA V4 EN-US
7. Hardware configuration
Hardware Configuration can be used to get a quick overview
of an IED and to add or change hardware modules. It is
possible to view the front and back of the IED including card
information and their slot position. Furthermore it is possible
to compare the hardware configuration used in the tool to the
GUID-ADD28079-AE48-4C38-BA28-138FDEE21977 V3 EN-US
actual one in the IED.
Figure 6. Signal Matrix view
8. IED configuration comparison
IED comparison is used for comparing configurations of two
IEDs of the same kind. Comparison can be made offline
6. Graphical display editor regardless of the IEDs being in the same PCM600 project or
Graphical Display Editor is used for configuring the display of not. Additionally, the configuration of an IED can be
an IED. The graphical display consists of one or more pages. compared to a loose PCMI file. When connected to the IED, it
A display page contains the drawing area where the actual is possible to compare the configurations between the IED
display configuration is made. A display is configured by and the PCM600 online. A report of the differences between
dragging predefined graphical symbols from a library to the the two different IED configurations is provided as a result of
drawing area. The directed link tool can be used to draw the comparison.
connections between symbols. Every symbol type has a
corresponding representation in both the ANSI and the IEC
9. IED summary
symbol palettes. Symbols can be connected to the
IED Summary can be used to document and view a quick
application configuration.
snapshot of all the protection and control IEDs on the
Graphical Display Editor also supports the reuse of display substation. PCM600 can collect all the important
page templates made for other IEDs. identification information from the IEDs and illustrate them in a
user-friendly browser. IED summary result can be printed for
documentation directly from the tool.
ABB 5
Protection and Control IED Manager 1MRS756448 T
PCM600
Product version: 2.12
By means of the task scheduler of PCM600, the records can 15. IEC 61850 configuration
be set to be automatically read from the IED. The task IEC 61850 Configuration provides the viewing or engineering
scheduler is an independent process and does not require of the dataset and dataflow configuration for a vertical or
PCM600 to be activated. After receiving the file, PCM600 horizontal IEC 61850 communication.
automatically creates a disturbance report, which can
In the view mode, the tool supports the viewing of the IEC
immediately be forwarded to subscribers by e-mail. Such a
61850 configuration, whereas in the engineering mode it is
notification shortens the time from disturbance detection to
possible to configure IEC 61850 datasets and dataflow for
corrective action.
the horizontal and vertical communication.
1) Engineering mode of IEC 61850 Configuration of PCM600 is recommended for simple applications. Advanced applications require an IEC 61850 system tool and view mode.
2) View mode of IEC 61850 Configuration of PCM600 for the transparancy of IEC 61850 configuration made by an external IEC 61850 system tool.
the administrator to create user groups with different access 20. Integrated help menus
rights and profiles. All the necessary instructions for using the tool are integrated
in PCM600. Context sensitive help menus and tool tips
The access management for the IEDs can be enabled or provide the user with information about the selected tools.
disabled with the IED user management tool in PCM600. The IED documentation and guides available from the
PCM600 also includes functionality to activate central connectivity package can be directly accessed from the help
account management on IEDs, and manage certificates on menus.
the IEDs.
Windows 10 (64-bit) -
Windows 11 (64-bit) -
Table 4. Communication
Protocols
ABB 7
Protection and Control IED Manager 1MRS756448 T
PCM600
Product version: 2.12
8 ABB
9
—
ABB Distribution Solutions
P.O. Box 699
FI-65101 VAASA, Finland
Phone +358 10 22 11
abb.com/mediumvoltage
1MRS756448 T