Professional Documents
Culture Documents
TABLE
WELCOME TO MY
PLANS AND RESOURCES
PAGE
METRIC & IMPERIAL PLANS.
LINK TO STEP-BY-STEP VIDEO TUTORIAL.
Side View
Front View
Top View
This generous, small donation will help keep the lights on over here at
DIY ROUTER DIY For Knuckleheads which will enable me to keep on making content
Many thanks in advance and good luck with your Router Table. You won’t
be disappointed!
Cheers,
To make things a little simpler, l have rounded up the numbers on the Imperial Plan to
suit, easy to read fractions. Because of this, the Imperial plans are slightly different to
the metric plans.
If they were exactly the same, the fractions would become very complicated. Because
of that, l haven’t included an Imperial Cutting List. Pleaser refer to the Imperial plans to
get those measurements.
Hope you understand.
Cheers.
CUTTING LIST
17MM FORMPLY
Screws
The Top of the table should overhang the front of the side
pieces by approximately 10mm and overhang both sides of
the board at the very back by approximately 10mm.
Just be aware that the router insert plate you have may be
different to mine. Even if your router insert plate is the same as
mine, please use the one you have as a template to mark out
the recess.
Just be aware that the router insert plate you have may be
different to mine. Even if your router insert plate is the same as
mine, please use the one you have as a template to mark out
the recess.