Professional Documents
Culture Documents
BMs'U
IIEEP METATLURfiITAL SERVICES
150 17043-2010 Arrredited pmf iriEnrV Iesting provider
ffi p(.it|.5
.ANAIYSIS
OF AN AIUMINUM ALI.OY BY OPTICAT
EMtsstoN sPECTROscopY (o,ES)
A proficiency Testing program
4.L program Name:
.Chemical Cornposition
A.2 Program Code No.:
of aluminum alloy by Spark OES
Chem 1224
A.3 Material: Equivalent AA 6061
4.4 Condition
A.5 Test Method: ASTM E1251 or any validated'method
164L224
A.7 Sample no: 92610
B Sarnple Descriptlon
8.1
a unique
PT
Expected range analysis, %
program
20%,0.35o/o<S
0.00 03%, 0.001.Yo<Zn<A, LAYI, 0.001%<v<0. !0Yo.
E Com petency'
8.1.
E.2
E.3
from
t.4
E.5
E.6
E. 7
PT Coordinator,
K.K. Karmakar
Email: deep.ptp2018@gmail.com
tltvls'*
I}EEP METALLURcITAT SEf,UITES
150 17043-2010 Accredited profirienc1l Testing provider bll ilABL pt'18d5
XX.XX
Lrrcation 5 l
***1 a
Ar*rg. XX.XX
{Please send the complete Test Result Form{Soft & hard copy), to
services,20, New Modella lndustrial Estate, Padwal Nagar,
- prp coordinator, Deep Metallurgical
wagle Estate, Thane, Maharashtra, lndia, pin-400604,
Mobile- 98922 16s39 emair:deep. ptp201g@gmail.com or mech@deep-ptp.in)
l'"
..-
TM
BI-{S
SERVITES pt-10{5
A
Program
Proficiency Testing Scarb hardness test.
;;';;-* Testing Scheme RockwellC
A.1 Program Name:
A.2 erolram Code No': Mech6324 steel
Material: ff"'O"n"A and tempered alloy lS 1585
A.3 or 15o65o8-1or
A.4 Test Method: ;;il naioot ASTM E18
TECHNICAL STANDARD INSTRUCTION FOR TENSITE TESTING OF STAINLESS STEEL ROUND SPECIMEN
a Sample DescriPtion
gauge diameter as per ASTM A370 or ASTM
Two standard machined round tensile specimens of 12.5mm
E8 are provided. The participant is to be reported alltensile
properties as per the ASTM method'
C Test Requirement
per ASTM A370 or ASTM E8 for
The participant is required to maintain stressing rate or strain rate as
percentage elongation on 50mm
determination of ultimate tensile strength, 0.2% offset Yield stress, and
gauge length or 4d and percentage reduction of area for round specimen.
D Expected range
The tensile test results are to be reported according to the Sl units employing the speed of testing as per
Standard. The expected tensile prgperties are mentioned below:
PT program Test method Expected tensile properties Speed oftesting, preferable
ASTM A37O 0.2% Offset Yield stress 150MPa min ASTM A370 or ASTM E8
Mech 5524
or ASTM E8 Tensile strength 415MPa min As above
E Competency
E.1 competent person should carry out the test and evaluate the result as a routine test.
All results will be analyzed based on Robust Algorithm A and Z score according
to 15O13528-15'
E.7
E.3 Final report includes all clauses of 4.8.2 of lSO17&13-2010
PT provider for
E.4 tn case of loss or deterioration of PTP Specimen, please feel free to contact the
Replacement-
case of suspicion of
E.5 Collusion and falsification of your PT result are totally forbidden. tn
participants'
collusion or falsification; the PT Provider reserves the right to exclude the
PT Co-Coordinator,
Mr. K.K.
Mobile- 9892216539, deep. ptp2018@gmail. com
0M5"' ,ffir,
BEEP METALTURCITAL
150 1?043-2010 Acffeditsd profirienry Testing provider bt/
ffi)
NABL pt-1865
Designation: *[E(H.NLC.L]SIN!QER
(Please sendthe complete-Test Result Form (soft& hard copy) to -- prp
coordinator, Deep Metallurgical services, 20, New
Modella lndustrial Estate, Padwal Nagar, wagle rstate, rhane,
naaharashtra-inoiu, pin-aooooa, Mobile- rrrrr;;r;-;;,
8
fi[,|S"
BETP METALTURCITAL SETUITES
l50 17043-2010 Acrredited Proficiency Testing provider Pt 1045
b!/ NABL
PT Co-Coordinator,
K:K. I"3Iir:.l{tQ
H, Tt:it.r\ililI
Mr. K.K. Karmakar,Deep
Mobile- 9892216539, Email
deeo.otb20 J.8@smail. corr.t