Professional Documents
Culture Documents
@ffi
.
cIN: u74e00Dl20lsPrc26E823
0eAAECEl460Btz4 TC-?980 csTIN : '1.:T,fflJ;i9,t
MECHANICAL TEST:
Pa.amet€rs Test M€thod Requirement as per Results Conformity
lS 4923: 2017 Grade YSt 31o
Tenrile Slr€ngth, MPa ls 1608 (P-1):2022 450 Min. 552
lS r5o8 (P-1):2022 310 Min. 444
Elongalion at cL=5.55VA(%) ls 1608 (P-1):2022 10 Min. 20.4
CHEMICAL TEST:
El€ments Test M€thod R€quirement as per Results Conformily
Gr.4 of lS 10748:2004
cl%l lS 8811: 1998 (RA-18) 0.20 Max. 0.178
Mn (%) 1S8811: 1998 (RA-18) 1.30 Max. 0.951
P l%) lS 881r: 1998 (RA-18) 0.040 Mer- 0.029
s (%) lS 88u:1998 (RA-18) 0.040 Max. 0.025
STATEMENTOI COt{FORMm: Material conforms to tS 4923:2017 Grade yst 310 as per above results only.
OPINIONS & INTTRPREIATTONS: Not appti.abte.
.*+.*..*..End of Report.*'.**..+.
1. This te.l rel€6 only to te.ted r.mpl.s and appttcabte paEm.t.E ontx
2. The 3.mple d.r.nptbn is not verm.d i. all erer and Ir etven -r desc bed by rh. customei
l. Test r.mpler will be dhpBed after 15 days trom the d.te ot a$ue o, re3t repor$ untess tr.u.red oth!rutse.
rffi]
4. Compl.inti if any rhould be in witine within seven dayr from the dete ot Lrqe ort.skeporE.
5. Thir rcport cannot be Eprcduced ercept ln full without written approval otthe laboratory.
6. This reFort cannot be used as.vidence in. coun of taw without written approvatotthe t.b. (Doc. Nor - EtPt/l-Fl18)
MECHANICAT TEST:
Test Method Requirement as per R€sultt Conformity
lS 4923:2017 Grade YSt 310
Tensile Strength, MPa ls 1608 (P-11:2022 450 Min. 542
Yield Stress, MPa rs 1508 (P-1): 2022 310 Min. 430
Elongation at GL=s.55VA (%) lS 1508 (P-1):2022 10 Min, 20,9
CHEMICAI- TEST;
Elements Test Method Requirement as per nesults Conformity
Gr.4 oflS 10748 :20(N
c (%) 15 8811: 1998 lPrA-18) 0.20 Max, 0.152
Mn (%) ls 8811r 1998 (RA-18) 1.30 Max. 0.984
P l%l 1S8811: 1998 (RA-18) 0.040 Max. 0.029
s (%) 1S8811: 1998 (RA-181 0.040 Max. 0.024
STATEMET{TOF CONFORMIIyt Material conforms to tS4923:2OU Grade yst 310 as perabove results only.
OPlNlOt{S & INTERPRETATTONS: Not appticabte.
MECHANICAI- TEST:
Test Method Requirement as per Results Conlormity
ts4923:2017 Grade YSt 310
Tensile Strength, MPa lS 1608 (P-1):2022 450 Min. 548
lS 1608 (P-1):2022 310 Min. 440
Elongation at cL:5.55VA(%) lS 1608 (P-1):2022 10 Mln. 22.1
CHEMICAL TEST:
flements Test M€lhod Requirement as per Result5 Conformity
Gr.4 of lS 10748:2004
cl%l 15 8811: 1998 IRA-18) 0.20 Max. 0.185
Mn (%) ls 88ur 1998 (RA-18) 1.30 Max. 0.964
P l%l lS 8811: 1998 (RA-18) O.OID Mar. 0.020
s (%) |s8811: 1998 (RA-18) 0,040 Max. 0.023
STATEMENTOF CONfORMtly: Materiat conforms to tS 4923:201? Grade yst 310 a5 perabove resutts onty.
OPltllOf{S & INTERPRETATIOt{S: Not applicable.
...**+..r.End oI Report r.r...r.*+
6..^v>
RESULTS
MECHANICAI- TEST:
Test Method R€quirement as per Results Conformity
lS 4923:2017 Grade YSt 310
Tensile Strength, MPa lS 1608 (P-1):2022 450 Min. 534
rs 1608 (P-1):2022 310 Mln, 429
Elongation at cL=5.55VA(%) lS 1608 (P-1):2022 10 Min. 19.9
CHEMICAI. TEST:
Elements Test Method Requirement as p€r Results Conformity
Gr.4 of lS 10748 12004
c (%) 1S8811: 1998 (RA-18) 0.20 Max. o.L7t
Mn (%) lS 8811:1998 (RA-18) o.922
P lv"l lS 8811:1998 (RA,18) 0.040 Max. 0.030
s (%) lS 8811: 1998 (RA-18) 0.040 Max. o.o27
STATTMENT OF CONTORMTTY: Materlal contorms to tS 4923: 2017 Grade yst 310 as per above rerults onty.
OPINIONS & INTERPRETAT|OttS: Not applicabte.
1.lhle tert refeR onlyto t.it.d s.mpt8 and appti.able par.metec o.ty.
2. The iample de.ription ii.otve.lfied in alt @sB.nd ir given ar detfitb.d bv the.ustomEi
3. Test s.mples willbe dl3pored after 15 d.yr from the date ofiisue ot t6t reponi !nte55 indructed orherui5e.
4. Complaints il any should be in witinswithih ieven days from the d.re or iriue of test repo.rs.
5. This rcport cannot he reproduced €xcept in full *ithoqt writren approEt otthe taboratory
5, This repon cannoi be us€d as evidence in a court ofl.w without *ritten.pprovatofthe tab. {Doc. No: - ELPVTF/18)
MECHANICAI- TEST:
Results
Tensile StrenSth, MPa rs 1608 (P-1):2022 322
Yield strers at 0.2% offset, MPa 151508 (P-r): 2022 210
Elongation at GL=so mm (%) rs 1508 (P-r):2022 r2.5
CHEMICAI,TEST:
Results
ar(%) ASTM E1251:20u 98.20
cu (%) asTM E1251: 2017 0.007
M8 (%) ASTM E1251: 2017 0.581
si{%) ASTM E1251: 2017 0.564
Fe {%l ASTM E1251:2017 o.L27
Mn (%) ASTM E1251: 2017 0.117
zn lYol ASTM E1251:2017 0.016
Til%) ASTM E1251:20u 0.018
cr (%) ASTM E1251:2017 0.003
.*.*..**..End of R€port.*+*r***+.
PHYSICAI, T€ST:
Test Method Requirement as per Results Conformity
lS 12435: 1988
Dimension stabilityat 100'C t 11239(ft-21198s 0.07
2.C
11239(ft-411985 5.5 Max. 2.2
Iransmission, ME/Dasm
Compression set at 10%, kt{/m2 11239(Pt-11) 1985 115 Min. 118
The.mal cond uctivity at lS: 3345-1985 0.03 Max. 0.02
so"c, vM.k
Horitontalburning, mm ls: 11239 (Pt-l2) 1985 125 Mex. 64
N'Ml^-
Review€UBy
1 This le9t .efeE only to tested sampl8 and appti.abte par.met.rr onty.
2, The sample d.r.riptlon ir notv.rifted in.ttcases and irsiven ar deirtbed by the customei
3. Tert s.mpleswillbe dlrpos€d after 1! d.ys lrom the date ol Issqe ot tett r.pons untess instru.ted otheruise.
4. C6mpl.i.ts if.nyshould be in writlns wirhin reven days frem rh. date of ittu€ ol tert reporte.
5. ThB.epon cannor b€ reprodu.ed ercept in ful withour written approvatofthe taboatory
6. Thh rcpon cannot be u3ed.s eviden.e in.6!rt of taw wirhout wrinen app,ovatotthe t.b.
lDoc. No: - ELPL/ttll8)
E-mail ID : testing@elmechlabs.com Website : w$w.elmechlabs.com
Phone:0120-4563.398 Mobile | 7 5991694a2,88967 67002