Professional Documents
Culture Documents
1. Performance
1.1 Must be easy to maintain, less mechanical pieces and “Plug & Play” components.
1.2 The product must generate electricity only with wind and piezoelectric components.
1.3 The model must be smaller than the traditional turbines.
1.4 Operating conditions [see Environment].
2. Environment
2.1 Resistant to adverse weather conditions.
2.2 The product should perform in the temperature range -4°F (-20°C) to 131°F (55°C).
2.3 The product should be resistant to corrosion.
2.4 The product should withstand wind gusts of 100 km/h.
2.5 The product should be able to install easily.
2.6 Dust and dirt should be easily cleaned from the product.
3. Life in Service
3.1 A minimum of 5 years is required for this product and 10 years is desirable.
4. Maintenance
4.1 Screws, bolts, and washers used must comply with International Standards.
4.2 Parts that require lubrication must be accessible.
4.3 The replacement of spare parts must be easily done.
6. Competition
6.1 Vortex Bladeless.
7. Packing
7.1 Size must be kept to a minimum.
7.2 Cost must be kept to a minimum.
7.3 Weight must be kept to a minimum.
7.4 Electronics components must be packed in a dust & water-resistant package.
7.5 Must be easily unpacked by the customer.
7.6 The company logo must be clearly shown on the package.
8. Shipping/Transport
8.1 Packages will be stored in 10 to one box.
8.2 ISO containers will be used to carry the boxes.
8.3 Transportation will be by sea then road or rail.
9. Quantity
9.1 The product is in a development phase, NPI phase is expected in 2 years (2026).
9.2 Long production runs expected.
12. Weight
12.1 The weight of the product should be no greater than 22 lb (10 kg).
13. Aesthetics
13.1 The brand values should be highly visible.
13.2 The company logo should be clearly seen in bold lettering horizontally in the assembly.
13.3 A robust image must be projected to the customer.
14. Materials
14.1 The use of existing materials for manufacture is imperative.
14.2 The materials selected must withstand the environmental conditions.
14.3 The materials should not oxidize in any way.
14.4 All the materials should be non-toxic.
14.5 The carbon fiber should be 0.43 mm thick.
14.6 All electronics materials must accomplish with IPC-A-610.
16. Standards/Specifications
16.1 IPC-A-610 Rev H. for SMT process.
16.2 USCAR 21 for harness standards.
16.3 ISO 61400 for traditional turbines design.
16.4 ISO 19453 for structural & loads.
17. Ergonomics
17.1 It must be easy to install, so that a customer without much knowledge of electronics or mechanics can do it.
17.2 Self-maintenance for the customer must be considered so it needs to be easy.
17.3 No sharp edges to be exposed.
17.4 It is preferable if controls are different colors for easy use.
18. Customer
18.1 It is expected that the customer must be electricity companies, individuals for home use, industrial
companies.
21. Processes
21.1 The process for electronics must accomplish with IPC-A-610 Rev H.
22. Timescale
22.1 Design Process complete—December 2025
22.2 Commence Manufacturing—February 1, 2026
22.3 Delivery of first Turbine—March 1, 2026
23. Testing
23.1 Batch inspection to be used for the final product.
23.2 10% of the product of any pallet must be tested to accomplish with quality requirements.
24. Safety
24.1 The product must comply with all relevant parts of CFR 1910.269 for electronics and electricity generation.
27. Patents
27.1 The following European Patent Office (EPO) patents should not be infringed:
WO2008070917A1.
29. Legal
29.1 The product adheres to the company’s product liability procedures and product liability legislation.
30. Installation
30.1 Product can be installed by personnel with basic principles of electronics & mechanics.
31. Documentation
31.1 Product accompanied by appropriate comprehensive documentation for use and maintenance.
32. Disposal
32.1 Product and constituent components can be disassembled for disposal and recycling where at all
possible.
32.2 Product components are clearly labeled for appropriate recycling/disposal.