Professional Documents
Culture Documents
Features
■ Direct insertion of heating cable into a
polyester enclosure
■ Flexible connection - heating cable/cold
cable
■ Space-saving, favourable dimensions
■ Simple project planning
Description
Technical data
If the enclosure is connected directly, the heating
Ambient temperature range
tape is first stripped and then insulation tubes
for junction box
are shrunk over the supply lines and the twisted
Standard -20 °C up to +65 °C
protective braiding and wire end sleeves are put
on. The heating cable is connected directly to for heating cable switched on
terminals in a junction box, IP 65 protection class. -20 °C up to +65 °C
-55 °C up to +65 °C on request
As an alternative, the heating cable can be
connected directly to a supply cable by means of for heating cable switched off
a butt connector. -20 °C up to +85 °C (cum. 1000 h)
-55 °C up to +85 °C on request
The heating circuit end is closed in each case with
a heat shrinkable end cap. ■ Electrical data
Nominal voltage
AC 230 V
(AC 110/120 V on request)
Power rating
10, 13, 15, 25 and 33 W/m
Selection chart
23