Professional Documents
Culture Documents
30 Days/60Hrs.
Day wise Topics Project Tab
Introduction Project Manager
Introduction to CAD Desk Create a New Project
Basic Introduction to AutoCAD Project Properties
Day 1 Day 20
Basics of Electrical Drawings Open Project file
GUI of AutoCAD Copy, Delete and Zip
File Extensions Create Subfolders and Drawing
Co-ordinate Method for Line Drawing Properties
Absolute Co-ordinate System (ACS) Schematic Tab
Day 2
Relative Co-ordinate System (RCS) Inserting Wires
Day 21
Polar Co-ordinate System (PCS) Inserting Multiple Wire Bus
Draw Tools Attaching Wire Numbers
Line Inserting Component from
Using Ortho Mode, Using Polar Icon menu
Day 3 Tracking, Using Dynamic Input Day 22 Creating Circuit diagrams
Circle Editing Components
Center Radius, Center Diameter, 2P, 3P, Insert Built-in Circuit
tan tan radius, tan tan tan Inserting Ladders
Day 4 Rectangle and Polygon Inserting Source and
Day 5 Ellipse, and Polyline Destination Arrow
Day 23
Arc, Multiple points, Point Style Multiple Insert Icon Menu
Day 6 Manager, Divide, Measure, Donuts, Multiple Insert Pick Master
Wipeout, Revision Cloud Create a Ladder Diagram
Drafting Settings Inserting Parametric PLC
Snap(F9) & Grid (F7), Ortho Mode (F8), Inserting Full Unit PLC
Polar Tracking (F10), Object Snap (F3), Day 24 Insert PLC on a Ladder
Day 7 Object Snap Tracking (F11), Dynamic Edit Component Tools
Input (F12), Quick Properties, Selection Insert Connectors
Cycling
Connector Editing Tools
Modify Tools
Day 8 Circuit Clipboard
Move, Copy, Stretch, Rotate Day 25
Create and Edit wire types
Day 9 Mirror, Scale, Trim, and Extend
Change/Convert wire type
Fillet, Chamfer, Erase, Explode, and
Day 10 Wire number editing tools
Offset, Break, Break at Point, Join
Array Symbol Builder
Rectangular Array Day 26 Create and edit symbols
Day 11 Icon Menu wizard
Polar Array
Path Array Practice/Doubt Clearing Session
Panel Tab
Annotation Tools
Text Insert Panel Footprints from
Icon Menu
Day 14 Single Line Text
Day 27 Edit Footprints
Multiline Text
Symbol Builder
Text Style Manager
Hatching
Dimensions
Linear, Aligned, Angular, Arc Length, Balloons
Day 15 Practice/Doubt Clearing Session
Radius, Diameter, Important settings in
Dimension Style Manager Inserting Terminals
Multi-leaders, Multi-leader Style Inserting Terminal Strips
Day 17 Manager, Tables Day 28 Manually
Layers Inserting Terminal Strip using
Properties Panel, Layer properties Terminal Strip editor
Day 18 Manager, Layer on/off, Layer Reports Tab
Freeze/Thaw, Layer Lock/unlock, Electrical Audit
Isolate and un-isolate layers Drawing Audit
Day 29
Blocks Signal/Errors List
Day 19 Create Block, Insert Block, Block Editor, Schematic Reports
Design Center, Tool Pallets Panel Reports
Electrical Plan Layout for a Residential Day 30 Printing and Exporting
Day 19 Building Doubt Clearing Session
Practice/Doubt Clearing Sessions
AutoCAD
AutoCAD Electrical
Mechanical 30 Days/60Hrs.
30 Days/ 60Hrs.