Professional Documents
Culture Documents
4 Register An Account
Alarm: The collector can only be plugged into the
Scan the QR Code below to download and install the Local distribution network
inverter, not any other device. Sign In
Step 1:
FoxCloud APP on your smartphone. Step 1: Step 2: SSID For Installer
Open the APP, Please scan the
For USB User Name
click "Local "SN" on the
Rotate the lock, make sure Step 1:
Distribution collector.
the triangle mark is on the OK Please click ‘Sign Up’, enter installer’s information to
Network" on the Password
front and centered. Plug complete the installer account registration.
login page.
the Smart WiFi into Remember Me Forget Password
3
Step 3: User Name
clockwise as following.
Configuration Connect your mobile device with Smart WiFi. The SSID
Email (Optional)
For 4P Aviation plug of the Smart WiFi is ‘W-xxxxx’ and the password is
Sign In
Plug the Smart WiFi into WiFi/GPRS port under the Note: The module is powered on and started, please ‘mtmt2020’. Password
bottom (underside) of the inverter. Make sure the label wait for one minute to start the WiFi Config.
Confirm Password
face to front. Tighten the nut clockwise as following. Web Configuration User Name
Then click “Wifi
Step 1: I have read and agree to the user agreement
Config”.
Connect your mobile device with Smart WiFi. The SSID Password
of the Smart WiFi is ‘W-xxxxx’ and the password is Next
Remember Me Forget Password
‘mtmt2020’.
Sign In
Note: If you already have an installer/agent account, please
press ‘Sign In’ and enter with your installer/agent account
directly.
Success
Contact Phone (Optional)
OK
Overview Sites Me
OK
For End User 5 Create A Plant For End User
All Normal
Sites
Alarm Offline
Note: If SN has been
Step 1: Step 1: bound to the plant
Please click ‘Sign Up’,
For Installer Open the APP, login with your end user account. already, APP will go The manual is updated frequently. Please scan the code
enter end user’s information to the page as to download the latest version.
to complete the end user account registration. Step 1: beside. If SN has not
Open the APP, login with your Installer/agent account. been bound before,
Sign In please refer to step 3.
Sign In
Sign Up
Sign In
User Name
User Name
Sign Up Password
We suggest you complete all information to ensure All Normal Alarm Offline
New Site OK Cancel OK
after-sales service.
*Site Name
*Site Type
End User Installer Agent *Datalogger List New Site OK
*Country/Region
*Site Name
*City
*Site Type
*Address
*Country/Region
*PV Size
*Time Zone
Agent / Installer Code (Optional)
*Post Code
Seasonal
*Agent DemoPlant
*Datalogger List