Professional Documents
Culture Documents
Instructions
Instructions
Groups have been formed on LMS and each group has been assigned a topic for assignment in the
attached file. Groups have been ordered alphabetically as Group X.
This assignment is an extension of the topics covered in lab sessions. Define your design statement
realistically (just like you observed in your lab sessions but in addition you are supposed to provide
a brief introduction) and make assumptions with justifications. You are required to work on the
given selected topics underlined and conduct the motion study accordingly. Include the pre-design
calculations where possible.
You are required to upload the PDF Assignment as well as the assembly & parts zip file.
Group
Members Title of Assignment
Name
Rehan Shahid (17),
Muhammad Ahmed (43),
Group A 3D Model Radial Engine Block
Muhammad Mohsin (69),
Ehtisham Ul Hassan (97)
Meen201101001,
Meen201101009,
Group B Assembly Design of a Backhoe in SolidWorks
Meen201101057,
Meen201101093
Malik Ali Iqbal (19),
Muhammad Waleed (27),
Group C M. Ramzan Amjad (31), Assembly Design of a Four Cylinder Engine
Abdul Hanan (73),
Irtaza Hussain (95)
Ali Munawar (37),
Muhammad Rufaeel (13),
Group D Assembly Design of a V-12 Engine Model
Sameer Ahmad (11),
Abdul Moiz (49)
MEEN201101005,
Group E 3D Model of a Bench Vice
MEEN201101027,
MEEN201101039,
MEEN201101065,
MEEN201101067
Meen 201101003,
Meen 201101055, Assembly Design of a Pelton Turbine (Rotor Disc with
Group F
Meen 201101071, Buckets)
Meen 201101109
MEEN201101007,
MEEN201101015,
Group G SolidWorks Design of a Mechanical Speed Braker System
MEEN201101021,
MEEN201101093
Meen201101051,
Meen201101053,
Group H Modified Assembly Design of a Savonious Wind Turbine
Meen201101075,
Meen201101081
Zuhaib Shah (111),
Irfan Aqeel (89),
Group I Assembly Design of an Invelox Wind Turbine
Abdullah Zafar (61),
Muhammad Umer (91)
Muhammad Hamza (25),
Group J Muhammad Shabbir (77), Assembly Design of an SDNR Valve
Muhammad Ahmad (87),
Group
Members Title of Assignment
Name
Muhammad Mubeen (22),
Imtiaz Ahmad (06),
Group A 3D Model Two-Cylinder Engine Block
Muhammad Faizan (70),
Qanbar Ali (38)
Anas Ilyas (08)
Group B Saim Iqbal (36) Assembly Design of a TurboJet
Usman Yaqub (32)
Sufyan Ali (10)
Hamza Imran (14)
Group C Assembly Design of a complete Steering Mechanism of a car
Dawood Bashir (16)
Zain Ijaz (50)
Ahtasham ul Haq (58),
Assembly Design of a Steward Platform for Ankle
Group D Khubaib Sayyaf Khan (72),
Rehabilitation
Muhammad Iqbal (108)
Zohaib Arif (04),
Group E Abdul Razzaq (42), 3D Model of Liam's Wind Turbine
M Ahmad Razzaq (46),
M Bilal Shahab (78)