Professional Documents
Culture Documents
ESO 2 Emergency Ventilator PMK Datasheet 5010430
ESO 2 Emergency Ventilator PMK Datasheet 5010430
A N A E S T H E S I A S O LU T I O N S
Kit Contents
Part No. Qty. Component Description
5006441
406020 1 Diaphragm valve - bellows unit Bellows
5006441 1 Bellows - Adult
5000072 1 Seal - bellows canister
041204 2 O-ring - Viton 406020
041222 1 O-ring, Viton, 12 mm Diaphragm
valve
041245 1 O-ring, Viton, 7 mm
300580 1 Exhaust diaphragm
041204
5005201 1 One-way valve - Laerdal lip membrane O-ring
(for patient block)
5005922 Battery 12 V (60 minute back-up) with
1
double-sided adhesive tape
103612 2 Tie wrap
102714 1 O2 sensor (MOX-3)
0691 4 O-seal (electrical interface bock)
0762 2 Filter - Pipeline gas inlet
462631 1 Hose - Fresh gas supply
041222
041204 041245
O-ring
O-ring O-ring
IMPORTANT
After removal
for servicing
or repair, or
cleaning and
sterilisation,
always check (A)
that the patient
block is refitted
to its original
control unit.
300580
Diaphragm
5005201
A One-way Valve
5010430-en A
NOTE
Battery 3V
This battery must be
changed at the 2-year
service interval
The battery is currently not
available from Penlon.
Please source a CR2354
Lithium battery from your
local supplier
5005922
462631 Battery 12 V (60 minute
Hose - Fresh back-up) with double-
gas supply sided adhesive tape
0691 x 4
O-ring
5000072
Seal - bellows canister
102714
O2 sensor
0762 x 2
Filter
Pipeline gas
inlet
5010430-en A. Penlon and InterMed are trademarks of Penlon Limited. All other trademarks are the property of their respective owners.
Part of the InterMed Group © Penlon Ltd 2021. All rights reserved.