Professional Documents
Culture Documents
Please consult also the quality requirements for production in the "General Instructions quality assurance" file
on the level of the work shop and in line (§4 machine setting … §5 and the appendixes, red ans green samples,
collection of second choice styles).
doubtful 2° Choice
RETROREFLECTIVE STRIPES
delamination → X
spots,… → position 1
big air bubbles → X
repairs → X
PRESS BUTTONS
peels off, no reinforcement, missing...→ X
COLOUR DIFFERENCE
in the same piece, degradation → X or contact QC Sioen
SEAMS
welded/taped too hard (tape → pos. 1, 2
molten);sloppy...
seams HF/ tape with wrinkles → pos. 1, 2
stitches too far → X
zigzag top stitching, not parallel → pos. 1
bad back tack / bar tack, missing … → X
TRIMMING
missing, wrong reference Contact Siotec when in production
DECALAGES (bad alignment)
1. horizontal
pocket / flaps
without point of reference 0,5 cm
hem / ….
stitching 0,5 cm
PRESS BUTTONS
2. vertical