Professional Documents
Culture Documents
control
GROUND FLOOR
1 LHS Barraack 14 18 0 1 0 0 0
2 LHS Barraack Toilet 0 4 0 0 0 0 0
3 Officer Room 1 3 1 1 2 1 0
4 RHS Barraack 14 18 0 1 0 0 0
5 RHS Barraack Toilet 0 4 0 0 0 0 0
6 Corridor/Outer Area 0 8 0 0 1 1 0
7 Stairs 0 0 0 0 0 0 1
Total For GF (A) 29 55 1 3 3 2 1
FIRST FLOOR
1 LHS Barraack 14 18 0 1 0 0 0
2 LHS Barraack Toilet 0 4 0 0 0 0 0
3 RHS Barraack 14 18 0 1 0 0 0
4 RHS Barraack Toilet 0 4 0 0 0 0 0
5 Corridor/Outer Area 0 8 0 0 1 1 0
Total For FF (B) 28 52 0 2 1 1 0
1 2 Nos. Separate Toilet Block (C.) 0 52 0 0 0 0 0
Grand Total (A+B+C) 57 159 1 5 4 3 1
Fittings
Telephone Point
Batton holder
70 watt
0 14 0 4 14 0 0
3 0 0 1 0 0 0
0 2 0 1 1 0 1
0 14 0 4 14 0 0
3 0 0 1 0 0 0
0 8 0 0 0 8 0
1 0 0 0 0 0 0
7 38 0 11 29 8 1
0 14 0 4 14 0 0
3 0 0 1 0 0 0
0 14 0 4 14 0 0
3 0 0 1 0 0 0
0 8 0 0 0 0 0
6 36 0 10 28 0 0
0 44 0 8 0 8 0
13 118 0 29 57 16 1
26 236 0 58 114 32 2
ROUGH COST ESTIMATE FOR CONSTRUCTION OF 2 NOS. DOUBLE STOREY BARRACKS FOR 100 PERSONS EACH
(50 PERSONS OF EACH FLOOR) ALONG WITH SEPARATE TOILET BLOCK AT NEW DISTT JAIL NABHA
CSR
34.02
i Wiring fan point (With fan box) 114 each 1210.21 137963.94 (i) b
v Wiring 6Amp. Plug control comprising wall socket point 8 each 371.36 2970.88 (v)
vi Wiring 16/20Amp. power plug control point 6 each 478.03 2868.18 (vi)
a Wiring Telephone socket point RJ11 (one module) 2 Each 355.24 710.48 (b)
.
2 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: CSR
34.12
Supply & erection of PVC Conduit Pipes (ISI marked) as per
IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995
for wiring purposes including bends, junction boxes, Steel hooks,
M.S. saddle clamps and other petty materials etc., as per PWD
General Specifications:-
i Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) 800 Mtr. 70.80 56640.00 (x)
ii Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed) 200 mtr. 97.34 19468.00 (xi)
iii Supply and erection of PVC flexible pipe complete without (xxv)
compression glands, locking arrangement, check-nuts
as required:-
Page 3
3 PVC INSULATED FR COPPER CONDUCTOR CABLES: CSR
34.09
iii Overall size 6sq.mm (Un-sheathed) 1500 Mtr. 73.96 110940.00 (v)
4 CHEMICAL EARTHING:
NS
i SP&N Double Door Distribution Board 12 way each 14 Each 1797.90 25170.60 (iii)
ii MCB Double Pole 40amp. (10kA, Curve-C) 14 Each 789.33 11050.62 (vii)
Page 4
Supply and erection of switches, sockets and other accessories
(flush piano type/ modular accessories) in the existing
bakelite/ modular cover frame including fixing & connections
and petty material etc.,:-
9 S/E OF FITTINGS:-
ii Suppy & erection of LED direct fit Lamp 14/15 watt (Crompton/
Philips/ Wipro/ Havell's make)
26 Each 236.00 6136.00 NS
(ii)
Page 5
a Single Arm Bracket 1 metre Long G.I. Pipe 40mm Dia. 32 Each 797.08 25506.56 (a)
16 Supply & erection sheet metal duct for fixing of heavy duty
exhaust fan opening size 400mmx400mm,450mm long made from
25mmx25mmx3mm thick MS angle iron frame covered with MS
sheet 2mm thick from 4 sides and wiremesh inner side. The job
also provide with arrangement for the fixing of exhaust fan 380mm
sweep and louver shutter.the duct to be fixed in wall in such a way
that the exhaust fan might not be accessable from inner side.the
duct shall be painted with two coats of approved enmmelled paint
of approved colour after applying primer. the job also includes the
cost of cement sand and corse mortar and petty material such as
nuts/boltsetc. and complete in all respects as desired by EIC.
iii Overall size 50sq.mm (3½ Core) Un- armoured (Loose) (xxiv)
600 Mtr. 266.01 159606.00
Page 6
20 MCCB's (MOULDED CASE CIRCUIT BREAKER):
CSR
34.23C
Page 7
i Supply and erection of Sheet metal cubical pedestal made (i)
from 50mmx50mmx6mm thick MS angle iron frame with 5
sides welded & covered with MS sheet 2mm thick & front
side hinged with 4" hinges & locking system with single/
double door openable placed on MS strip of size 12.5mm
x 2.5mm thick welded with MS sheet, 4Nos. legs of
50mmx50mmx6mm thick MS angle iron each of 600mm
long with MS sheet 100mmx100mmx6mm thick at the
bottom end of the legs. Front door welded x-sectionally with
MS flat 25mmx5mm. The front side with MS sheet each 75mm
wide & a bend of 75mm width outwards & inwards on all sides
with tappered top 200mm high and pedestal with 4 Nos.
supporting members each of MS flat 50mmx6mm thick
according to cubical size duly welded & complete pedestal
to be painted with 1 coat of red oxide & 2 coats of paint &
bonding to the existing earth. The Pedestal platform should
be filled with 1:2:4 cement concrete mixture and
erected 150mm high from the top of the cement concrete
platform. The job is to be completed as approved by Engineer-in-
charge:-
a Cubical Size 1200mm high, 900mm wide and 350mm deep (b)
with platform dimensions 1000mm x 450mm x 450mm
Page 8