You are on page 1of 2

®

VESDA
ACCESSORIES

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 19" Subrack and Detector Enclosures


○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Glass-Fronted Mounting Options


Enclosures Display and Programmer modules can be
To compliment the VESDA LaserPLUS range
mounted in a Detector Enclosure, in a Remote
of detectors, displays and programmers a
Box or in a 19 inch Subrack. Furthermore, a Pro-
range of IP66 enclosures are available. The
grammer Module can be mounted in a Hand-
19 inch rack enclosures are designed to house
held unit which can be temporarily connected
up to 20 display and programmer modules
to any LaserPLUS Detector.
in a wide variety of configurations to suit the
particular requirements of a site where
Details of these standard mounting options are
centralised control and monitoring of the
given in the Detector, Display and Programmer
VESDA LaserPLUS system is required. A detec-
Datasheets.
tor enclosure is also available which incorpo-
rates a small glass window to view an on-
board display. The detector enclosure enables Relay Signalling
a single detector to be installed in challeng-
ing environments where a high IP rating is Each Display Module can be configured to drive
required. relays which can be used for reliable (fault toler-
ant) signalling of Fire and Fault conditions to
external systems.
Modular System
Standard Display Modules can drive 7 relays
The VESDA LaserPLUS Aspirating Smoke De- while Scanner Display Modules can be config-
tectors are available in a wide range of con- ured to drive 7 or 12 relays. Relay functionality
figurations to suit the particular requirements is fully configurable according to site require-
of each site. The system is modular with Dis- ments.
play and Programmer Modules located in the
most convenient location. The backbone to
this modularity is VESDAnet, a fault tolerant
Detector Enclosure
RS485 communications loop which links all A single LaserPLUS Detector can be installed in
elements of the LaserPLUS system together. an IP66 enclosure. The door allows convenient
access for maintenance while a small glass win-
dow in the door enables viewing of a LaserPLUS
Display Module mounted in the central position
on the Detector. Sampling pipe connections and
cable entries are similar to the standard Detec-
tor. In order to maintain the IP66 rating the air
exhaust must be routed to prevent the ingress
of water.

19" Rack Enclosure


19" Subracks can be installed in IP66 glass fronted
enclosures. Two versions are available; 2 rack
(up to 8 Modules) and 5 rack (up to 20 Modules).
19" Subracks are mounted on a swing frame for
convenient connection of all the cables.

Cable entry for 24VDC power, VESDAnet con-


nection and interfacing to the relays is provided
by a removable gland plate which is drilled as
required on site. 19" Subracks and 3U blank
panels must be ordered separately.
19" SUBRACK and DETECTOR ENCLOSURE Specifications
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Overall Dimensions in mm (and inches):


Enclosure Part No. A B C a b
mm inches mm inches mm inches mm inches mm inches
Detector 020-050 300 11.81 400 15.75 140 5.51 n/a n/a n/a n/a
2 row 19" rack 020-052 400 15.75 600 23.62 220 8.66 150 5.91 450 17.72
5 row 19" rack 020-055 800 31.50 600 23.62 220 8.66 150 5.91 450 17.72

Supply Voltage:
18 to30 VDC
Power Consumption:
2.4 watts quiescent plus 0.6 watts
alarm per display
1.3 watts quiescent plus 1.7 watts
with backlight per programmer
For detector, see detector datasheet
Current Consumption (@24VDC):
90mA quiescent plus 20mA alarm
per display
50mA quiescent plus 60mA with
backlight per programmer
For detector, see detector datasheet
Basic Construction:
Fully welded 1.5mm steel enclosure
Fully welded 2mm glazed steel door Each position in a 19" Subrack is defined as follows:
IP Rating: IP66* WHERE:
*With suitable cable glands and 0 Blank panel
pipe connections 1 Programmer module
Colour: Powder coated in RAL 7035 2 Display module (with 7 relays)
Locks: Black lockable wing locks 3 VESDAnet socket
Mounting and Fixings: 4 Scanner display module (with 7 relays)
Wall mounting kit supplied 5 Relay processor module (with 7 relays)
19" subrack mounting kits supplied 6 Display module (no relays)
2 row swing frame is 7U with a 7 Scanner display module (no relays)
blank 1U panel supplied 8 Scanner dispaly module (with 12 relays)
5 row swing frame is 16U with a 9 Relay processor module (with 12 relays)
blank 1U panel supplied ALSO:
Cable Access 19" Rack Enclosures: A Programmer module
Gland plate supplied (no termination card)
Cable Access for Detector Enclosure: B Display module Common Subrack Examples:
2x25mm (1 in.) holes in bottom face (no termination card) VSR-2222
Cable Termination: C Scanner display module VSR-4444
Screw terminal blocks (no termination card) VSR-1222
(0.2-2.5mm2,30-12 AWG) Only 2 display modules can be powered from a VSR-1888
Ordering Information: single termination card; each display/relay processor Other Subrack Examples:
Detector enclosure 020-050 module is configured to a single detector only. VSR 5599
2 row rack enclosure 020-052 VSR-6B6B
5 row rack enclosure 020-055 For unused rows, use a 3U blank plate – VSR-A222
19" subracks VSR-#### 149-021 VSR-7C7A

Europe www.vesda.com
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Vision Systems – VESDA


Vision House, Focus 31, Mark Road
Hemel Hempstead, Herts. HP2 7BW
United Kingdom
Ph: +44 1442 242 330
Vision Systems Fax: +44 1442 249 327
©1999 Vision Systems – VESDA™. All rights reserved. In accordance with its policy of continuing product and system improvement, Vision Products reserves the right to change design or specifications without obligation and without
further notice. VESDA® is a registered trademark of Vision Products Pty. Ltd. VESDA InfoWORKS, ASPIRE, LaserPLUS, LaserSCANNER, LaserCOMPACT, AutoLearn, VSM, and VESDAnet are trademarks of Vision Products Pty. Ltd.

Form No.: 18625 Revision: 1 Printed: July 99

You might also like