Professional Documents
Culture Documents
1. A block of mass 0.1 kg is held against a wall by 4. A block A of mass m is kept on a rough inclined
applying a horizontal force of 5 N on the block. If plane of inclination . The coefficient of static
friction between the block and the surface is
the coefficient of friction between the block and the
s = 0.75. If the angle is slowly increased from 0°
wall is 0.5, the magnitude of the friction force
to 37°, then the friction versus graph is
acting on the block is
(A) 2.5 N (B) 0.98 N
(C) 4.9 N (D) 0.49 N
2. A horizontal force of 10 N is necessary to hold a
f f
block stationary against a wall. The coefficient of
(A) (B)
37°
friction between the block and the wall is 0.2. The 37°
weight of the block is f f
(C) (D)
10 N
(A) 20 N (B) 10 N
(C) 12 N (D) 15 N
(A) 10 N (B) 100 N
(C) 50 N (D) Zero
2
6. A block of mass m is placed on a rough fixed 9. A rod of mass m and length l is placed on a rough
sphere. The coefficient of static friction between horizontal surface. The coefficient of static friction
1
the sphere and the block is s = . Find the is = bx, where b is a positive constant. Find
3
maximum force F applied on the rod, so that rod
maximum value of , so that the block remains
stationary. does not move.
x=l
x=0
mgb l
O (A) mgbl (B)
2
mgb l
(C) (D) Zero
3
(A) 30° (B) 45°
(C) 60° (D) 90°
10. A uniform massive rope ABC has length of 6 m.
7. A block A of mass 1 kg is in contact with a vertical The rope is hold by applying a force F at an angle
plate. The plate is moving horizontally with an of = 37° with horizontal surface. If hanging part
acceleration a0. The block does not slide on the is less than 2 m, then the rope does not slip on the
plate. The coefficient of static friction between the
horizontal rough surface. The value of coefficient
block and the plate is 0.5. Find minimum value of
a0. of static friction is
F
37° A
A g
a0 B C
Ground
(A) 10 m/s2 3
(A) 0.5 (B)
(B) 15 m/s2 5
(C) 20 m/s2 5 2
(C) (D)
(D) Zero 6 3
8. A force F of 13 N along X-axis on a block of mass 11. Three identical billiard balls each of mass 1 kg are
1 kg is placed on a rough inclined plane as shown placed as shown in the figure. The upper ball is
in the figure. Find minimum coefficient of friction,
smooth. Find minimum coefficient of static friction
such that the block does not slide on inclined plane.
Y between lower balls and ground, so that balls
remain stationary.
X 37°
1
(A) 1 (B)
2 1 1
(A) (B)
7 7 3 3 3
(C) (D)
8 16 2
(C) (D) 0.5
3
3
Integer Type
1 kg
14. A cylinder of mass m = 10 g is held at rest by prongs
of a forceps. If s = 0.01 be the coefficient of
friction, find the minimum normal force (in 37°
newton) exerted by the cylinder on one of the
ii. A force of 10 N is applied on the block of mass
prongs.
1 kg placed on rough inclined surface.
g
1k
F = 10 N
53°
37°
4
iii. Two forces F1 = 18 N and F2 = 20 N are acted 17. Calculate maximum force F required to hold a
on a block parallel to rough inclined surface as block stationary in the following cases.
shown in the figure. Another force F3 = 10 N F
is acting on the block making an angle of 37° 10 kg 4.9 kg 37°
F
with the inclined plane. i. ii.
F3 = 10 N s = 0.5 s = 0.3
0N k = 0.4 k = 0.2
=2 F
37° F2
F
g
1k
N 53° 3 kg
= 18 iv.
F1 1 kg s =
2
37° iii. 5
s = 0.5 k =
1
iv. A block of mass 1 kg is placed on a rough k = 0.4 5
inclined plane of inclination 30°. A horizontal v. A block of mass 0.5 kg is pushed against a rough
force F = 12 N is applied on the block parallel
vertical wall with a force of 6 5 N. Another
to the plane.
force F is applied on the block at an angle of 37°
Answer Key
1. (B) 10. (D)
2. (D) 11. (B)
3. (A) 12. (A, B)
4. (A) 13. (A, D)
5. (A) 14. (5)
6. (A) 15. (i - 10 N, ii - 102 N, iii - 100.50 N, iv - 46.82 N,
7. (C) v - 31.6 N, vi - 20 N, vii - 67.08 N)
8. (C) 16. (i - 10 N, ii - N, iii - 2 N, iv - 15.62 N)
9. (B) 17. (i - 50 N, ii - 15 N, iii - 25 N, iv - 20 N, v - 2 N)
PW Web/App - https://smart.link/7wwosivoicgd4
Library- https://smart.link/sdfez8ejd80if