This document provides specifications for a CNG dispenser for cars and buses. It lists 17 parameters for the dispenser including the make and model, normal and maximum inlet pressures, operating temperature range, flow rates, batch accuracy, electrical supply requirements, fill nozzle type and pressure rating, hose type and pressure rating, sequential filling capability, and specifications for the mass flow meter including accuracy and repeatability.
This document provides specifications for a CNG dispenser for cars and buses. It lists 17 parameters for the dispenser including the make and model, normal and maximum inlet pressures, operating temperature range, flow rates, batch accuracy, electrical supply requirements, fill nozzle type and pressure rating, hose type and pressure rating, sequential filling capability, and specifications for the mass flow meter including accuracy and repeatability.
This document provides specifications for a CNG dispenser for cars and buses. It lists 17 parameters for the dispenser including the make and model, normal and maximum inlet pressures, operating temperature range, flow rates, batch accuracy, electrical supply requirements, fill nozzle type and pressure rating, hose type and pressure rating, sequential filling capability, and specifications for the mass flow meter including accuracy and repeatability.
1.0 Dispenser CAR / BUS 1.1 Make TGT 1.2 Model P7203 – 12 CNG50 1.3 Normal Inlet Pressure Kg/cm2g 250 1.4 Maximum Fill pressure Kg/cm2g 200 1.5 Operating Temperature range of wetted parts (-)10C to 600C 1.6 Flow Rate (kg/min) >75 1.7 Normal flow (kg/min) 75 1.8 Minimum flow (kg/min) 2.5 1.9 Overall Cv of dispenser from inlet of dispenser to 6.4 outlet of fill nozzle 1.10 Batch accuracy +1.5% 1.11 Electrical supply AC230Volts+10% 50HZ+3% 1.11.1 Tolerable value of voltage range for accurate 10% operation 1.12 Fill Nozzle 1.12.1 Type Sherex/OPW CT 5000 or equivalent (With captive vent) / Staubli Socket 1.12.2 Make Sherex / Staubli 1.12.3 Pressure Rating Kg/cm2g 250 Kg/cm2g 1.13 Flexible fill & vent hose Dual 1.13.1 Type Thermoplastic 1.13.2 Make Synflex 1.13.3 Pressure Rating Kg/cm2g 5000 PSI 1.14 Sequential filling Three bank 1.15 Mass flow meter Two 1.15.1 No. of metering lines One independent 1.15.2 Metering principle Coriollis 1.15.3 Make Micromotion / E&H 1.15.4 Model CNG 50 / CNG Mass 1.15.5 Mass Flow accuracy for gas meter (inclusive of linearity, hysteresis, repeatability errors) + 0.5% 1.15.6 Repeatability + 0.25% 1.16 Temperature compensation Yes 1.17 Breakaway coupling Yes