Professional Documents
Culture Documents
2024
Subjects: Hydraulic Engineering FM: 50
1. A trapezoidal channel of base width 6m having uniform flow at a depth of 1m with side slopes of 3H:4V
and bed slopes of 1V:1000H. Determine the flow rate, conveyance and type of flow using Chezy’s formula if
friction factor value is 0.03.
2. A trapezoidal channel having side slope equal to 60 degrees with the horizontal and laid on a slope of 1 in 850
carries a discharge of 6m3/s. determine the width at the base and depth of flow for MECS. (C=55)
3. A rectangular channel has a width of 2m carries a discharge of 4.8m3/s with a depth of 1.60 m at a certain
section a small, smooth hump with a flat top and of height 0.10m is proposed to be built. Calculate the new
water surface. Neglect the energy losses.
5. Calculate the depth of flow and specific energy at critical flow condition for a discharge of 5 cumec for the
i. Rectangular channel (B = 2m)
ii. Triangular channel (m = 0.5)
iii. Trapezoidal channel (B = 2m, m = 1.5)
2. A trapezoidal channel having side slope equal to 60 degrees with the horizontal and laid on a slope of 1 in 850
carries a discharge of 6m3/s. determine the width at the base and depth of flow for MECS. (C=55)
3. A rectangular channel has a width of 2m carries a discharge of 4.8m3/s with a depth of 1.60 m at a certain
section a small, smooth hump with a flat top and of height 0.10m is proposed to be built. Calculate the new
water surface. Neglect the energy losses.
5. Calculate the depth of flow and specific energy at critical flow condition for a discharge of 5 cumec for the
i. Rectangular channel (B = 2m)
ii. Triangular channel (m = 0.5)
iii. Trapezoidal channel (B = 2m, m = 1.5)