Professional Documents
Culture Documents
Substations: OPTIONS
> Transformer lockout (86). > Reset Inhibitor available upon request
> Sequencer in tap changers. > Manual reset pushbutton available upon request
> Security loops. > LDL contacts available
> Alarm signaling with recognition.
1 www.arteche.com
V1.0
LATCHING RELAYS
TECHNICAL SPECIFICATIONS
Construction Characteristics
Applications Power source independent lockout
Contacts 16 Changeover contacts
Connections
Electrical Characteristics
Standard voltages 24, 48, 72, 110, 125, 220 Vdc/Vac (50/60Hz)
Voltage range -20% +10% Un
Coil characteristics Pick-up / release voltage See pick-up/release voltage-temperature curves
Average consumptions in the
<108 W
changeover
Operating times Pick-up time < 10 ms
Contact material AgNi
≤ 30 mΩ
Contacts resistance
(15 m LDL range)
Distance between contacts 1,8 mm
Permanent current 10 A
Contacts
Instantaneous current 30 A 1s. 80 A 200 ms 200 A 10 ms.
Max. making capacity 40A, 0,5s, 110Vdc | 30A, 1s, 36Vdc, | 30.000 operations (1op/15s)
Breaking capacity *See figures
Max. breaking capacity 100.000 operations
Umax opened contact 250 Vdc / 400 Vac
Dielectric strength 2 kV. 50Hz. 1 min
Impulse voltage 5 kV. 0,5 J. 1,2/50 µs
Insulation resistance 500 Vdc.; > 100MW
Endurance characteristics
Mechanical endurance 1*107 operations
2 www.arteche.com
V1.0
LATCHING RELAYS
Other Standard Compliance
Vibration and 60255-21-1 Class 2
shock Stress
during operation 60255-21-2 Class 1
3 www.arteche.com
V1.0
LATCHING RELAYS
BREAKING CAPACITY CURVES
The breaking capacity is a critical parameter on the design and the application of the relay. Its mechanical life could be
considerably reduced, depending on the value of the load (especially with heavy duty loads), the number of operations
and the environmental conditions in which the relay is operating.
48 Vdc 125Vdc
Resistive load:
L/R = 0 ms
Inductive load:
L/R = 20 ms
Highly inductive load:
L/R = 40 ms
4 www.arteche.com
V1.0
LATCHING RELAYS
PICK-UP & RELEASE VOLTAGE-TEMPERATURE CHARTS
RELAY DIMENSIONS
5 www.arteche.com
V1.0
LATCHING RELAYS
SOCKETS AND RETAINING CLIP
The dimensional and format of the sockets for the relay BI16-R are “I” type. Please refer to the document
“MU_BASES_RELES_EN” for further and more precise details.
The list of sockets & clips available for this model are:
Sockets
I DE
I TR -
I EMP TR -
Clips
This model is screwed to the socket, so does not have retaining clips
-
available
6 www.arteche.com
V1.0
LATCHING RELAYS