Professional Documents
Culture Documents
Wit Pe 500
Wit Pe 500
connection
Colour Red
Details/Application
• Suitable for attaching metal structures, metal profiles, wooden structures, brackets, pipes, cable conduits etc.
• Suitable for structural expansions, ceiling and wall attachments, expansion of load-bearing structures, reinforcement of load-
bearing structures, attachment of balconies and canopies, sealing of temporary openings and “forgotten” reinforcing bars
Create the drill hole Clean the drill hole: 4x Place the setting depth Screw mixer to cartridge; Before using, apply Mount injection equip- Insert the reinforcement Visual check of the mortar
blow out with compressed mark on the rod and use application gun about 10 cm of product ment, fill injection mortar bar until it reaches the filling quantity, observe
air > 6 bar check the drilling hole (not into the drill hole) from bottom of drill hole mark with a slight turning maximum processing time
depth movement
Make the drill hole, break 2x flush with water (Until 2x blow-out/2x brush- Place the setting depth Screw mixer to cartridge; Before using, press out Mount injection equip- Insert the reinforcement
out the drill core clear water comes)/ out/2x blow-out mark on the rod and check use application gun about 10 cm of product ment, fill composite mortar bar until it reaches the
brush 2x/flush 2x with the drilling hole depth (not into the drill hole) from the bottom of the mark with a slight turning
water (Until clear water drill hole movement
comes)
CL01_4510010101, Rev: 0.388, State: 30. 08. 2023
##keep##
Related products
Designation Art. no.
for
Cordless application gun WIT 0891 003 585
Pneumatic 2C application gun WIT 0891 017
0903 480 001
Handymax application gun, 585 ml 0891 018
Mixer nozzle for WIT-PE 500 and WIT-VM 250 cartridges 0903 488 101
CL01_4510010101, Rev: 0.388, State: 30. 08. 2023