Professional Documents
Culture Documents
Exercise 3
1- What are the important of subbase layers?
2- Write short notes on: LAAT.
3- What are the pavement types?
4- Mention types of asphalt?
5- Mention how can you classify asphalt? And discuss each one?
6- Determine a blend of the two aggregates shown on the table which will meet specification
requirements using analytical and graphical solutions.
Agg 3/4 1/2 3/8 NO.4 NO.8 NO.30 NO.50 NO.100 NO.200
Pass. Agg A 100 90 59 16 3 0 0 0 0
Ret. Agg B 0 0 0 4 18 49 64 79 91
Specification 100 80-100 70-90 50-70 35-50 18-29 13-23 8-16 4-10
for passing
7- Determine a blend of the two aggregates shown on the table which will meet specification limit of
aggregate C using analytical and graphical solutions.
8- Determine a blend of the three aggregates shown on the table which will meet specification limit of
table which will meet specification requirements using analytical and graphical solutions .
Aggregate
Sieve size A B C Specification
1 inch 100 100 100 94 to 100
1/2 inch 63 100 100 70 to 85
No.4 19 100 100 40 to 55
No.8 8 93 100 30 to 42
No.30 5 55 100 20 to 30
No.100 3 36 97 12 to 22
No.200 2 3 88 5 to 11
9- There is a two coarse aggregates: aggregate No 1, and aggregate No 2, and the fine aggregate is a
sand. The following table shows the following:
• Retained weight of Agg. 2 on each sieve in gm.
• Percentage of total passing of Agg. 1.
• Specification of mixed coarse aggregate (Agg. 1 + Agg. 2).
• Specification of all in aggregate (Agg. 1 + Agg. 2 + sand).